83905AG-01LFT

83905AG-01LFT Datasheet


83905-01

Part Datasheet
83905AG-01LFT 83905AG-01LFT 83905AG-01LFT (pdf)
Related Parts Information
83905AG-01LF 83905AG-01LF 83905AG-01LF
83905AK-01LFT 83905AK-01LFT 83905AK-01LFT
83905AK-01LF 83905AK-01LF 83905AK-01LF
PDF Datasheet Preview
Low Skew, 1:6 Crystal-to-LVCMOS Fanout Buffer
83905-01

DATA SHEET

The 83905-01 is a low skew, 1-to-6 LVCMOS Fanout Buffer. The low impedance LVCMOS outputs are designed to drive series or parallel terminated transmission lines. The effective fanout can be increased from 6 to 12 by utilizing the ability of the outputs to drive two series terminated lines.

The 83905-01 is characterized at full 1.8V, 1.5V, and 1.2V, mixed 1.8V/1.5V, 1.8V/1.2V and 1.5V/1.2V output operating supply mode. Guaranteed output skew characteristics along with the 1.2V output capabilities makes the 83905-01 ideal for high performance, single ended applications that also require a limited output voltage.

Pin Assignments

ENABLE2 XTAL_OUT XTAL_IN ENABLE1 nc

GND 1 GND 2 BCLK0 3
83905-01
15 BCLK5 14 VDDO 13 BCLK4
• Six LVCMOS outputs
• Outputs able to drive 12 series terminated lines
• Crystal Oscillator Interface
• Crystal input frequency range 10MHz to 40MHz
• Output skew 95ps maximum
• RMS phase jitter 25MHz, 100Hz 1MHz 0.17ps typical

Offset

Noise Power
100Hz................. -115 dBc/Hz
1kHz -138 dBc/Hz
10kHz -154 dBc/Hz
100kHz -160 dBc/Hz
• Synchronous output enables
• Power supply modes Full 1.8V, 1.5V, 1.2V

Mixed 1.8V core/1.5V output operating supply Mixed 1.8V core/1.2V output operating supply Mixed 1.5V core/1.2V output operating supply
• 0°C to 70°C ambient operating temperature
• Available in lead-free RoHS 6 package

VDDO 4
12 GND

BCLK1 5
11 GND

Block Diagram

BCLK0

GND BCLK2

VDD BCLK3
20-pin, 4mm x 4mm VFQFN Package

XTAL_OUT 1

ENABLE2 2

GND 3

BCLK0 4

VDDO
Ordering Information
Table Ordering Information

Part/Order Number

Marking

Package

Shipping Packaging

Temperature
83905AG-01LF
3905A01L
16-Lead TSSOP, Lead-Free

Tube
0C to 70C
83905AG-01LFT
3905A01L
16-Lead TSSOP, Lead-Free

Tape & Reel
0C to 70C
83905AK-01LF 83905AK-01LFT
5A01L
20-Lead VFQFN, Lead-Free 20-Lead VFQFN, Lead-Free

Tray Tape & Reel
0C to 70C 0C to 70C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

LOW SKEW, 1:6 CRYSTAL-TO-LVCMOS FANOUT BUFFER

Corporate Headquarters 6024 Silver Creek Valley Road San Jose, CA 95138 USA

Sales 1-800-345-7015 or 408-284-8200 Fax 408-284-2775

Tech Support email:

DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.

IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.

Copyright 2015 Integrated Device Technology, Inc.. All rights reserved.
More datasheets: KMPC8540VT667LC | KMPC8540VT667LB | KMPC8540VT833LB | TLE4941C-HT | TLE4941-1-HT | TLE4941-1C-HT | TLE4941-HT | CA06R22-18SF80 | 83905AG-01LF | 83905AK-01LFT


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 83905AG-01LFT Datasheet file may be downloaded here without warranties.

Datasheet ID: 83905AG-01LFT 636688