V23818-K305-L57

V23818-K305-L57 Datasheet

V23818-K305-L17/L57 *

Part	Datasheet
V23818-K305-L57	V23818-K305-L57 (pdf)

Related Parts	Information
V23818-K305-L17	V23818-K305-L17

PDF Datasheet Preview
Dimensions in mm [inches] V23818-K305-L17/L57 * Small Form Factor Multimode 850 nm GBd Fibre Channel Gigabit Ethernet 2x5 Transceiver with LC Connector V23818-K305-L57 FEATURES • Small Form Factor transceiver • Full compliant with Fibre Channel Standard • Excellent EMI performance • RJ-45 style LC connector system • Half the size of SC Duplex 1x9 transceiver • Single power supply V Fiber Optics a recommended bezel position shown design with collar • Extremely low power consumption of 445 mW typical • PECL and LVPECL differential inputs and outputs • System optimized for µm graded index fiber • Multisource 2x5 footprint • Small size for high port density • UL-94 V-0 certified • ESD Class 1 per MIL-STD 883D Method • Compliant with FCC Class B and EN 55022 • For distances of up to 700 m • Class 1 FDA and IEC laser safety compliant • AC/AC coupling in accordance to SFF MSA * Ordering Information Input Output Signal detect Voltage Part Number V V23818-K305-L17 V23818-K305-L57 LC is a trademark of Lucent MARCH 2002 Absolute Maximum Ratings Exceeding any one of these values may destroy the device immediately. Package Power W Data Input Levels PECL V Differential Data Input Voltage V Storage Ambient Temperature............................. C to 85°C Soldering Conditions, Temp/Time MIL-STD 883C, Method 2003 250°C/ s VCC max V ECL-Output current data mA The Infineon Gigabit Ethernet multimode transceiver part of Infineon Small Form Factor transceiver family is based on the Physical Medium Depend PMD sublayer and baseband medium, type 1000BASE-SX short wavelength , Fibre Channel FC-PI 100-M5-SN-I, 100-M6-SN-I FC-PH2 100-M5-SN-I, FC-PH2 100-M6-SN-I. The appropriate fiber optic cable is µm or 50 µm multimode fiber with LC connector. Operating range for over each optical fiber type Fiber type Min. Typ. meters Max. meters micron MMF 2 to 300 micron MMF 2 to 550 The Infineon Gigabit Ethernet multimode transceiver is a single unit comprised of a transmitter, a receiver, and an LC receptacle. This design frees the customer from many alignment and PC board layout concerns. This transceiver supports the LC connectorization concept. It is compatible with RJ-45 style backpanels for high end Data Com and Telecom applications while providing the advantages of fiber optic technology. The module is designed for low cost SAN, LAN, WAN, Fibre Channel and Gigabit Ethernet applications. It can be used as the network end device interface in mainframes, workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, hubs, and local and wide area switches. This transceiver operates at 1 and Gbit/s from a single power supply V . The full differential data inputs and outputs are PECL and LVPECL compatible. Functional Description of 2x5 Pin Row Transceiver This transceiver is designed to transmit serial data via multimode cable. Functional Diagram TxDis TD− TD+ Automatic Shut-Down Laser Driver RD− RD+ SD Power Control Monitor Receiver Laser Coupling Unit e/o Laser o/e Multimode Fiber Rx Coupling Unit o/e The receiver component converts the optical serial data into PECL compatible electrical data RD+ and The Signal Detect SD, active high shows whether an optical signal is present. The transmitter converts PECL compatible electrical serial data TD+ and into optical serial data. Data lines are differentially 100 terminated.

PDF Datasheet Preview

Dimensions in mm [inches]

V23818-K305-L17/L57 *

Small Form Factor Multimode 850 nm GBd Fibre Channel

Gigabit Ethernet 2x5 Transceiver with LC Connector

V23818-K305-L57

FEATURES
• Small Form Factor transceiver
• Full compliant with Fibre Channel Standard
• Excellent EMI performance
• RJ-45 style LC connector system
• Half the size of SC Duplex 1x9 transceiver
• Single power supply V

Fiber Optics
a recommended bezel position
shown design with collar
• Extremely low power consumption of 445 mW typical
• PECL and LVPECL differential inputs and outputs
• System optimized for µm graded index fiber
• Multisource 2x5 footprint
• Small size for high port density
• UL-94 V-0 certified
• ESD Class 1 per MIL-STD 883D Method
• Compliant with FCC Class B and EN 55022
• For distances of up to 700 m
• Class 1 FDA and IEC laser safety compliant
• AC/AC coupling in accordance to SFF MSA
* Ordering Information

Input Output Signal detect Voltage Part Number

V V23818-K305-L17

V23818-K305-L57

LC is a trademark of Lucent MARCH 2002

Absolute Maximum Ratings

Exceeding any one of these values may destroy the device immediately.

Package Power W Data Input Levels PECL V Differential Data Input Voltage V Storage Ambient Temperature............................. C to 85°C Soldering Conditions, Temp/Time

MIL-STD 883C, Method 2003 250°C/ s VCC max V ECL-Output current data mA

The Infineon Gigabit Ethernet multimode transceiver part of Infineon Small Form Factor transceiver family is based on the Physical Medium Depend PMD sublayer and baseband medium, type 1000BASE-SX short wavelength , Fibre Channel FC-PI 100-M5-SN-I, 100-M6-SN-I FC-PH2 100-M5-SN-I, FC-PH2 100-M6-SN-I.

The appropriate fiber optic cable is µm or 50 µm multimode fiber with LC connector.

Operating range for over each optical fiber type

Fiber type

Min.

Typ.
meters

Max. meters
micron MMF
2 to 300
micron MMF
2 to 550

The Infineon Gigabit Ethernet multimode transceiver is a single unit comprised of a transmitter, a receiver, and an LC receptacle. This design frees the customer from many alignment and PC board layout concerns.

This transceiver supports the LC connectorization concept. It is compatible with RJ-45 style backpanels for high end Data Com and Telecom applications while providing the advantages of fiber optic technology.

The module is designed for low cost SAN, LAN, WAN, Fibre Channel and Gigabit Ethernet applications. It can be used as the network end device interface in mainframes, workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, hubs, and local and wide area switches.

This transceiver operates at 1 and Gbit/s from a single power supply V . The full differential data inputs and outputs are PECL and LVPECL compatible.

Functional Description of 2x5 Pin Row Transceiver

This transceiver is designed to transmit serial data via multimode cable. Functional Diagram

TxDis

TD− TD+

Automatic Shut-Down

Laser Driver

RD− RD+ SD

Power Control

Monitor

Receiver

Laser Coupling Unit
e/o Laser
o/e Multimode Fiber

Rx Coupling Unit o/e

The receiver component converts the optical serial data into PECL compatible electrical data RD+ and The Signal Detect SD, active high shows whether an optical signal is present.

The transmitter converts PECL compatible electrical serial data TD+ and into optical serial data. Data lines are differentially 100 terminated.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived V23818-K305-L57 Datasheet file may be downloaded here without warranties.

Datasheet ID: V23818-K305-L57 638854