TUA 6039

TUA 6039 Datasheet

TUA 6039-2, TUA 6039, TUA 6037

Part	Datasheet
TUA 6039	TUA 6039 (pdf)

PDF Datasheet Preview
TUA 6039-2, TUA 6039, TUA 6037 3 Band Digital / Hybrid Tuner IC with integrated IF AGC amplifier OmniTune TUA 6039-2, OmniTune TUA 6039, OmniTune TUA 6037 Communication Solutions Edition 2007-08-20 Published by Infineon Technologies AG 81726 München, Germany Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics “Beschaffenheitsgarantie” . With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of noninfringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. TUA 6039-2, TUA 6039, TUA 6037 3 Band Digital / Hybrid Tuner IC with integrated IF AGC amplifier OmniTune TUA 6039-2, OmniTune TUA 6039, OmniTune TUA 6037 Communication Solutions TUA 6039-2, TUA 6039, TUA 6037 TUA 6039-2, TUA 6039, TUA 6037 2007-08-20 Previous Version: 2006-10-31 Branding name changed to OmniTuneTM. OmniTuneTM TUA 6039-2 included in data sheet. Formatting of document cross-references updated. TUA 6039 Ordering Code corrected. New Ordering Code for TUA 9 - 11 DMB-TH standard added. 19 - 22 Average DC voltage corrected for X_TAL_CAP, OSCLOWOUT and OSCLOWIN. Functional Block Diagram updated. Functional Block Diagram for TUA 6037 added. Functional Description of PLL block updated. Functional Description added for ADC. 37 - 48 Tuning voltage leakage current, maximum limit added. Phase Noise Parameter, maximum limit added. Footnotes of Table 7 updated We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal including a reference to this document to: Data Sheet TUA 6039-2, TUA 6039, TUA 6037 Table of Contents List of Tables 7 List of Figures 8 Product Info 9 Product Description 10 Features 10 General 10 Mixer/Oscillator 10 SAW Filter Driver 11 IF AGC Amplifier 11 PLL 11 Application 11 Recommended band limits in MHz 11 Functional Description 13 Pin Configuration 13 Pin Definition and Functions 16 Functional Block Diagram 23 Circuit Description 26 Mixer-Oscillator block with SAW filter driver 26 PLL block 26 RF AGC 27 IF AGC amplifier 27 I2C-Bus Interface 28 Loop thru 28 ADC 29 Application 30 Tuner application block diagram 30 Application circuit for hybrid application 31 Application circuit for ATSC 32 Application circuit for DVB-T 33 Application circuit for ISDB-T 34 Reference 35 Electrical Data 35 Absolute Maximum Ratings 35 Operating Range 37 AC/DC Characteristics 37 Bus Interface 48 I2C Bus Timing Diagram 54 Data Sheet TUA 6039-2, TUA 6039, TUA 6037 Electrical Diagrams 55 Input admittance S11 of the LOW band mixer 30 to 200 MHz 55 Input impedance S11 of the MID band mixer 130 to 500 MHz 55 Input impedance S11 of the HIGH band mixer 400 to 1000 MHz 56 Output admittance S22 of the of the mixers 30 to 60 MHz 56 Input admittance S11 of the SAW filter driver 30 to 60 MHz 57 Output impedance S22 of the SAW filter driver 30 to 60 MHz 57 Input admittance S11 of the IF AGC amplifier 30 to 60 MHz 58 Output impedance S22 of the IF AGC amplifier 30 to 60 MHz 58 Measurement Circuits 59 Gain GV measurement in LOW band 59 Gain GV measurement in MID and HIGH bands 59 Matching circuit for optimum noise figure in LOW band 60 Noise figure NF measurement in LOW band 60 Noise figure NF measurement in MID and HIGH bands 61 Cross modulation measurement in LOW band 61 Cross modulation measurement in MID and HIGH bands 62 Ripple susceptibility RSC measurement 62 Package VQFN-48 63 Data Sheet TUA 6039-2, TUA 6039, TUA 6037 List of Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 Table 13 Table 14 Table 15 Table 16 Table 17 Table 18 ATSC tuners 11 DVB-T and analog tuners 12 ISDB-T tuners 12 Pin Definition and Functions 16 Absolute Maximum Ratings 35 Operating Range 37 AC/DC Characteristics, TA = 25°C, VCC = V. 37 Bit Allocation Read/Write 48 Description of Symbols 49 Address selection. 50 Test modes 50 Reference divider ratios 51 RF AGC take-over point. 51 A to D converter levels 52 Charge pump current 52 Internal band selection 52 Defaults at power-on reset 53 Description of modes 53 Data Sheet TUA 6039-2, TUA 6039, TUA 6037 List of Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 Figure 20 Figure 21 Figure 22 Figure 23 Pin Configuration of TUA 6039-2 13 Pin Configuration of TUA 6039 14 Pin Configuration of TUA 6037 15 Functional Block Diagram of TUA 6039-2 23 Functional Block Diagram of TUA 6039 24 Functional Block Diagram of TUA 6037 25 Functional Block Diagram of Loop thru 29 Tuner application block diagram 30 Circuit diagram for hybrid application DVB-T / PAL . 31 Circuit diagram for ATSC 32 Circuit diagram for DVB-T 33 Circuit diagram for ISDB-T 34 I2C Bus Timing Diagram 54 Gain GV measurement in LOW band 59 Gain GV measurement in MID and HIGH bands. 59 Matching circuit for optimum noise figure in LOW band 60 Noise figure NF measurement in LOW band. 60 Noise figure NF measurement in MID and HIGH bands 61 Cross modulation measurement in LOW band 61 Cross modulation measurement in MID and HIGH bands 62 Ripple susceptibility measurement 62 PG-VQFN-48 Vignette 63 PG-VQFN-48 Outline Drawing 63 Data Sheet Ordering Information Type TUA 6039-2 TUA 6039 TUA 6037 Ordering Code SP000279216 SP000259230 SP000274731 Package PG-VQFN-48 PG-VQFN-48 PG-VQFN-48 Data Sheet TUA 6039-2, TUA 6039, TUA 6037 Product Description Product Description The TUA 6039-2, TUA 6039, TUA 6037 ’OmniTune TUA 6039-2, OmniTune TUA 6039, OmniTune TUA 6037’ device combines a mixer-oscillator block with a digitally programmable phase locked loop PLL and a variable gain IF AGC amplifier for use in TV and VCR tuners, set-top-box and mobile applications. Integrated narrow band RF AGC functions with output buffer are provided. The mixer-oscillator block includes three balanced mixers one mixer with an unbalanced high-impedance input and two mixers with a balanced low-impedance input , two 2-pin asymmetrical oscillators for the LOW and the MID band, one 4-pin symmetrical oscillator for the HIGH band, a reference voltage and a band switch. The mixer output signal passes a SAW filter driver and an IF AGC amplifier to provide constant output level ready for A/D sampling. The PLL block with four pin programmable chip addresses forms a digitally programmable phase locked loop. With a 4 MHz quartz crystal, the PLL permits precise setting of the frequency of the tuner oscillator up to 1024 MHz in increments of 50, 125, or kHz. The tuning process is controlled by a microprocessor via an I2C bus. A flag is set when the loop is locked. The lock flag can be read by the processor via the I2C bus. The device has 5 output ports and a X_TAL output buffer. One of the ports P4 can be also used as input for a 5-level A to D converter only available in TUA General • Supply voltage range 3 to V • Narrowband RF AGC detector for internal tuner with - 5 programmable take over points - 2 programmable time constants - RF AGC buffer output • Low phase noise • Full ESD protection • Qualified according to JEDEC for consumer applications Mixer/Oscillator • High impedance mixer input common emitter for LOW band • Low impedance mixer input common base for MID band • Low impedance mixer input common base for HIGH band • 2 pin oscillator for LOW band • 2 pin oscillator for MID band • 4 pin oscillator for HIGH band Data Sheet TUA 6039-2, TUA 6039, TUA 6037 Product Description SAW Filter Driver • 4 IF pins to connect a 2 pole bandpass • Symmetrical IF preamplifier with low output impedance able to drive a compensated SAW filter 500 pF IF AGC Amplifier • Symmetrical variable gain IF output amplifier with low noise, high linearity, high dynamic range. • 4 pin-programmable I2C addresses • I2C bus protocol compatible with V and 5 V micro-controllers up to 400 kHz • High voltage VCO tuning output • 4 PNP ports • 1 NPN port/ADC input1 • Power down mode • Internal LOW/MID/HIGH band switch • Lock-in flag • 6 programmable reference divider ratios 24, 28, 32, 64, 80, 128 • 4 programmable charge pump currents Application • The IC is suitable for PAL, NTSC, SECAM, DVB-C, DVB-T, T-DMB, DMB-TH, DAB, ISDB-T, Open Cable and ATSC tuners. The focus is on digital terrestrial. • The AGC stage makes the tuner AGC independent of the Video-IF AGC. Recommended band limits in MHz Table 1 Band LOW MID HIGH ATSC tuners RF input Oscillator 1 ADC function is only available in TUA Data Sheet TUA 6039-2, TUA 6039, TUA 6037 Product Description Table 2 Band LOW MID HIGH DVB-T and analog tuners RF input Oscillator Table 3 Band LOW MID HIGH

PDF Datasheet Preview

TUA 6039-2, TUA 6039, TUA 6037
3 Band Digital / Hybrid Tuner IC with integrated IF AGC amplifier OmniTune TUA 6039-2, OmniTune TUA 6039, OmniTune TUA 6037

Communication Solutions

Edition 2007-08-20

Published by Infineon Technologies AG 81726 München, Germany

Infineon Technologies AG

All Rights Reserved.

Legal Disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics “Beschaffenheitsgarantie” . With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of noninfringement of intellectual property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

TUA 6039-2, TUA 6039, TUA 6037
3 Band Digital / Hybrid Tuner IC with integrated IF AGC amplifier OmniTune TUA 6039-2, OmniTune TUA 6039, OmniTune TUA 6037

Communication Solutions

TUA 6039-2, TUA 6039, TUA 6037

TUA 6039-2, TUA 6039, TUA 6037
2007-08-20

Previous Version:
2006-10-31

Branding name changed to OmniTuneTM.

OmniTuneTM TUA 6039-2 included in data sheet.

Formatting of document cross-references updated.
TUA 6039 Ordering Code corrected. New Ordering Code for TUA
9 - 11

DMB-TH standard added.
19 - 22

Average DC voltage corrected for X_TAL_CAP, OSCLOWOUT and OSCLOWIN.

Functional Block Diagram updated. Functional Block Diagram for

TUA 6037 added. Functional Description of PLL block updated. Functional

Description added for ADC.
37 - 48

Tuning voltage leakage current, maximum limit added. Phase Noise Parameter, maximum limit added. Footnotes of Table 7 updated

We Listen to Your Comments

Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal including a reference to this document to:

Data Sheet

TUA 6039-2, TUA 6039, TUA 6037

Table of Contents

List of Tables 7

List of Figures 8

Product Info 9

Product Description 10 Features 10

General 10 Mixer/Oscillator 10 SAW Filter Driver 11 IF AGC Amplifier 11 PLL 11 Application 11 Recommended band limits in MHz 11

Functional Description 13 Pin Configuration 13 Pin Definition and Functions 16 Functional Block Diagram 23 Circuit Description 26

Mixer-Oscillator block with SAW filter driver 26 PLL block 26 RF AGC 27 IF AGC amplifier 27 I2C-Bus Interface 28 Loop thru 28 ADC 29

Application 30 Tuner application block diagram 30 Application circuit for hybrid application 31 Application circuit for ATSC 32 Application circuit for DVB-T 33 Application circuit for ISDB-T 34

Reference 35 Electrical Data 35

Absolute Maximum Ratings 35 Operating Range 37 AC/DC Characteristics 37 Bus Interface 48 I2C Bus Timing Diagram 54

Data Sheet

TUA 6039-2, TUA 6039, TUA 6037

Electrical Diagrams 55 Input admittance S11 of the LOW band mixer 30 to 200 MHz 55 Input impedance S11 of the MID band mixer 130 to 500 MHz 55 Input impedance S11 of the HIGH band mixer 400 to 1000 MHz 56 Output admittance S22 of the of the mixers 30 to 60 MHz 56 Input admittance S11 of the SAW filter driver 30 to 60 MHz 57 Output impedance S22 of the SAW filter driver 30 to 60 MHz 57 Input admittance S11 of the IF AGC amplifier 30 to 60 MHz 58 Output impedance S22 of the IF AGC amplifier 30 to 60 MHz 58

Measurement Circuits 59 Gain GV measurement in LOW band 59 Gain GV measurement in MID and HIGH bands 59 Matching circuit for optimum noise figure in LOW band 60 Noise figure NF measurement in LOW band 60 Noise figure NF measurement in MID and HIGH bands 61 Cross modulation measurement in LOW band 61 Cross modulation measurement in MID and HIGH bands 62 Ripple susceptibility RSC measurement 62

Package VQFN-48 63

Data Sheet

TUA 6039-2, TUA 6039, TUA 6037

List of Tables

Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 Table 13 Table 14 Table 15 Table 16 Table 17 Table 18

ATSC tuners 11 DVB-T and analog tuners 12 ISDB-T tuners 12 Pin Definition and Functions 16 Absolute Maximum Ratings 35 Operating Range 37 AC/DC Characteristics, TA = 25°C, VCC = V. 37 Bit Allocation Read/Write 48 Description of Symbols 49 Address selection. 50 Test modes 50 Reference divider ratios 51 RF AGC take-over point. 51 A to D converter levels 52 Charge pump current 52 Internal band selection 52 Defaults at power-on reset 53 Description of modes 53

Data Sheet

TUA 6039-2, TUA 6039, TUA 6037

List of Figures

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 Figure 20 Figure 21 Figure 22 Figure 23

Pin Configuration of TUA 6039-2 13 Pin Configuration of TUA 6039 14 Pin Configuration of TUA 6037 15 Functional Block Diagram of TUA 6039-2 23 Functional Block Diagram of TUA 6039 24 Functional Block Diagram of TUA 6037 25 Functional Block Diagram of Loop thru 29 Tuner application block diagram 30 Circuit diagram for hybrid application DVB-T / PAL . 31 Circuit diagram for ATSC 32 Circuit diagram for DVB-T 33 Circuit diagram for ISDB-T 34 I2C Bus Timing Diagram 54 Gain GV measurement in LOW band 59 Gain GV measurement in MID and HIGH bands. 59 Matching circuit for optimum noise figure in LOW band 60 Noise figure NF measurement in LOW band. 60 Noise figure NF measurement in MID and HIGH bands 61 Cross modulation measurement in LOW band 61 Cross modulation measurement in MID and HIGH bands 62 Ripple susceptibility measurement 62 PG-VQFN-48 Vignette 63 PG-VQFN-48 Outline Drawing 63

Data Sheet
Ordering Information

Type TUA 6039-2 TUA 6039 TUA 6037
Ordering Code SP000279216 SP000259230 SP000274731

Package PG-VQFN-48 PG-VQFN-48 PG-VQFN-48

Data Sheet

TUA 6039-2, TUA 6039, TUA 6037

Product Description

Product Description

The TUA 6039-2, TUA 6039, TUA 6037 ’OmniTune TUA 6039-2, OmniTune TUA 6039, OmniTune TUA 6037’ device combines a mixer-oscillator block with a digitally programmable phase locked loop PLL and a variable gain IF AGC amplifier for use in TV and VCR tuners, set-top-box and mobile applications. Integrated narrow band RF AGC functions with output buffer are provided.

The mixer-oscillator block includes three balanced mixers one mixer with an unbalanced high-impedance input and two mixers with a balanced low-impedance input , two 2-pin asymmetrical oscillators for the LOW and the MID band, one 4-pin symmetrical oscillator for the HIGH band, a reference voltage and a band switch. The mixer output signal passes a SAW filter driver and an IF AGC amplifier to provide constant output level ready for A/D sampling.

The PLL block with four pin programmable chip addresses forms a digitally programmable phase locked loop. With a 4 MHz quartz crystal, the PLL permits precise setting of the frequency of the tuner oscillator up to 1024 MHz in increments of 50, 125, or kHz. The tuning process is controlled by a microprocessor via an I2C bus. A flag is set when the loop is locked. The lock flag can be read by the processor via the I2C bus. The device has 5 output ports and a X_TAL output buffer. One of the ports P4 can be also used as input for a 5-level A to D converter only available in TUA

General
• Supply voltage range 3 to V
• Narrowband RF AGC detector for internal tuner with
- 5 programmable take over points - 2 programmable time constants - RF AGC buffer output
• Low phase noise
• Full ESD protection
• Qualified according to JEDEC for consumer applications

Mixer/Oscillator
• High impedance mixer input common emitter for LOW band
• Low impedance mixer input common base for MID band
• Low impedance mixer input common base for HIGH band
• 2 pin oscillator for LOW band
• 2 pin oscillator for MID band
• 4 pin oscillator for HIGH band

Data Sheet

TUA 6039-2, TUA 6039, TUA 6037

Product Description

SAW Filter Driver
• 4 IF pins to connect a 2 pole bandpass
• Symmetrical IF preamplifier with low output impedance able to drive a compensated

SAW filter 500 pF

IF AGC Amplifier
• Symmetrical variable gain IF output amplifier with low noise, high linearity, high dynamic range.
• 4 pin-programmable I2C addresses
• I2C bus protocol compatible with V and 5 V micro-controllers up to 400 kHz
• High voltage VCO tuning output
• 4 PNP ports
• 1 NPN port/ADC input1
• Power down mode
• Internal LOW/MID/HIGH band switch
• Lock-in flag
• 6 programmable reference divider ratios 24, 28, 32, 64, 80, 128
• 4 programmable charge pump currents

Application
• The IC is suitable for PAL, NTSC, SECAM, DVB-C, DVB-T, T-DMB, DMB-TH, DAB, ISDB-T, Open Cable and ATSC tuners. The focus is on digital terrestrial.
• The AGC stage makes the tuner AGC independent of the Video-IF AGC.

Recommended band limits in MHz

Table 1

Band LOW MID HIGH

ATSC tuners

RF input

Oscillator
1 ADC function is only available in TUA

Data Sheet

TUA 6039-2, TUA 6039, TUA 6037 Product Description

Table 2

Band LOW MID HIGH

DVB-T and analog tuners

RF input

Oscillator

Table 3

Band LOW MID HIGH

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TUA6039 Datasheet file may be downloaded here without warranties.

Datasheet ID: TUA6039 638844