PEF 24624 E V2.2-G

PEF 24624 E V2.2-G Datasheet

Symmetric DSL Front End, 4/2/1 Channel SDFE-4, PEF 24624 E SDFE-2, PEF 22624 E SDFE-1, PEF 21624 E

Part	Datasheet
PEF 24624 E V2.2-G	PEF 24624 E V2.2-G (pdf)

Related Parts	Information
PEF 21624 E V2.2-G	PEF 21624 E V2.2-G
PEF 22624 E V2.2-G	PEF 22624 E V2.2-G
PEF 22624 E V1.3-G	PEF 22624 E V1.3-G
PEF 21624 E V1.2-G	PEF 21624 E V1.2-G

PDF Datasheet Preview
SDFE-4/2/1 Symmetric DSL Front End, 4/2/1 Channel SDFE-4, PEF 24624 E SDFE-2, PEF 22624 E SDFE-1, PEF 21624 E The SDFE-4/2/1 are the latest members of Infineon’s 2nd generation family of SHDSL transceivers designed for pure TDM applications. The SDFE-4/2/1 features full compliance with the ETSI TS 101524 and the ITU G.991.2 G.SHDSL/G.SHDSL.bis standards. Advanced system functionality and cost saving features continue to provide significant low BOM advantages in the SOCRATES tradition. These features, in combination with an unprecedented power consumption of approximately 500 mW per channel, and a very small footprint, make the SDFE-4/2 excellent solutions for remote powered repeater designs. • ISDN primary rate access replacement • SHDSL repeater/regenerator • Digital Loop Carrier DLC Systems • Extended range full and fractional E1/T1 • RITL and WLL systems • Wireless infrastructure • SDH and SONET termination • TU-12 transport • Leased line services • PBX trunk lines • Fully integrated 4/2/1 channel transceiver solution, including DSP, microcontroller, analog front end AFE , line driver and memory, in a single integrated chip • Support of payload data rates from 144 kbit/s up to kbit/s with 8 kbit/s granularity exceeding G.SHDSL.bis • M-pair functionality integrated • Tunable hybrid for optimal loop adaptation and reach • Only a few external passive components required Loop Interface • Line probing according ITU-T G.991.2 2004 • Flexible setting of PSD shaping • Highly sophisticated TC-PAM line coding • Programmable framer • Supported TDM clocks MHz, MHz, MHz, MHz, MHz, MHz • 4/2/1 integrated HDLC controllers for EOC handling one per channel • 128-byte FIFO for transmit and receive direction per channel Customer Interface • Universal TDM interface • Bit-serial interface Modes • Line termination unit LTU STU-C • Network termination unit NTU STU-R • Regenerator unit COT/RT SRU-C/R Physical Characteristics • Only two power supplies V, V • Power consumption approximately 500 mW per channel • Temperature range -40°C to +85°C • Package P-LBGA-324 19 mm x 19 mm • SDFE-4/2/1 are pin and software compatible w. i n f i n e o n c o m / p r o d u c t s Wireline Communications Never stop thinking. SDFE 4/2/1 PHY Block Diagram Serial Host I/F µC TDM Framer M-Pair Unit LD AFE Hybrid LD AFE Hybrid LD AFE Hybrid LD AFE Hybrid Ordering Information SDFE-4/2/1 Product Sales Code PEF24624E PEF22624E PEF21624E Product SDFE-4 SDFE-2 SDFE-1 Description 4-Channel Symmetric DSL Front End 2-Channel Symmetric DSL Front End 1-Channel Symmetric DSL Front End Package P-LBGA-324 P-LBGA-324 P-LBGA-324 4x E1/T1/J1 QuadFALC PEF 22554 SDFE-4 PEF 24624 4x SHDSL E1/T1 Replacement Application Example Board Controller How to reach us Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München Infineon Technologies AG All Rights Reserved. Template pb_tmplt.fm/4 Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Published by Infineon Technologies AG Ordering No. B115-H8424-X-X-7600 Printed in Germany PS nb

PDF Datasheet Preview

SDFE-4/2/1

Symmetric DSL Front End, 4/2/1 Channel SDFE-4, PEF 24624 E SDFE-2, PEF 22624 E SDFE-1, PEF 21624 E

The SDFE-4/2/1 are the latest members of Infineon’s 2nd generation family of SHDSL transceivers designed for pure TDM applications. The SDFE-4/2/1 features full compliance with the ETSI TS 101524 and the ITU G.991.2 G.SHDSL/G.SHDSL.bis standards. Advanced system functionality and cost saving features continue to provide significant low BOM advantages in the SOCRATES tradition. These features, in combination with an unprecedented power consumption of approximately 500 mW per channel, and a very small footprint, make the SDFE-4/2 excellent solutions for remote powered repeater designs.
• ISDN primary rate access replacement
• SHDSL repeater/regenerator
• Digital Loop Carrier DLC Systems
• Extended range full and fractional E1/T1
• RITL and WLL systems
• Wireless infrastructure
• SDH and SONET termination
• TU-12 transport
• Leased line services
• PBX trunk lines
• Fully integrated 4/2/1 channel transceiver solution, including DSP, microcontroller, analog front end AFE , line driver and memory, in a single integrated chip
• Support of payload data rates from 144 kbit/s up to kbit/s with 8 kbit/s granularity exceeding G.SHDSL.bis
• M-pair functionality integrated
• Tunable hybrid for optimal loop adaptation and reach
• Only a few external passive components required

Loop Interface
• Line probing according ITU-T G.991.2 2004
• Flexible setting of PSD shaping
• Highly sophisticated TC-PAM line coding
• Programmable framer
• Supported TDM clocks MHz,

MHz, MHz, MHz, MHz, MHz
• 4/2/1 integrated HDLC controllers for EOC handling one per channel
• 128-byte FIFO for transmit and receive direction per channel

Customer Interface
• Universal TDM interface
• Bit-serial interface

Modes
• Line termination unit LTU STU-C
• Network termination unit NTU STU-R
• Regenerator unit COT/RT SRU-C/R

Physical Characteristics
• Only two power supplies V, V
• Power consumption approximately 500 mW
per channel
• Temperature range -40°C to +85°C
• Package P-LBGA-324 19 mm x 19 mm
• SDFE-4/2/1 are pin and software compatible
w. i n f i n e o n c o m / p r o d u c t s

Wireline Communications

Never stop thinking.

SDFE 4/2/1 PHY Block Diagram

Serial

Host

I/F µC

TDM Framer

M-Pair Unit

LD AFE

Hybrid

LD AFE

Hybrid

LD AFE

Hybrid

LD AFE

Hybrid
Ordering Information

SDFE-4/2/1

Product Sales Code PEF24624E PEF22624E PEF21624E

Product SDFE-4 SDFE-2 SDFE-1

Description 4-Channel Symmetric DSL Front End 2-Channel Symmetric DSL Front End 1-Channel Symmetric DSL Front End

Package P-LBGA-324 P-LBGA-324 P-LBGA-324
4x E1/T1/J1

QuadFALC PEF 22554

SDFE-4 PEF 24624
4x SHDSL

E1/T1 Replacement Application Example

Board Controller

How to reach us Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München Infineon Technologies AG All Rights Reserved.

Template pb_tmplt.fm/4

Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein.

Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office.

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Published by Infineon Technologies AG
Ordering No. B115-H8424-X-X-7600 Printed in Germany PS nb

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PEF24624EV2.2-G Datasheet file may be downloaded here without warranties.

Datasheet ID: PEF24624EV2.2-G 638539