EVALPFC1-TDA 4863-2

EVALPFC1-TDA 4863-2 Datasheet

160W PFC Evaluation Board with DCM PFC controller TDA4863-2 and CoolMOS SPP08N50C3

Part	Datasheet
EVALPFC1-TDA 4863-2	EVALPFC1-TDA 4863-2 (pdf)

PDF Datasheet Preview
Application Note Version 160W PFC Evaluation Board with DCM PFC controller TDA4863-2 and CoolMOS SPP08N50C3 Power Management & Supply TDA4863-2 SPP08N50C3 <DocNumber> Ver1.0, April 2004_doc_release> Never stop thinking. 160W PFC Evaluation Board with DCM PFC controller TDA4863-2 and CoolMOS SPP08N50C3 Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. <Docnumber> April 2004 Confidential 160W PFC Evaluation Board with DCM PFC controller TDA4863-2 and CoolMOS SPP08N50C3 Previous Version: Junyang Luo Simon Lim Meng Kiat Jeoh Infineon Technologies Asia Pacific Pte Ltd Infineon Technologies AP All Rights Reserved. We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal including a reference to this document to: <Docnumber> April 2004 160W PFC Evaluation Board with DCM PFC controller TDA4863-2 and CoolMOS SPP08N50C3 Table of Contents Topics Abstract 1 Evaluation Board 2 Technical specifications 3 Circuit Description Line input Current Sense PWM control of Boost Converter Gate Drive Output 4 Circuit Operation Start up Protection Features Output over-voltage protection IC supply under voltage lock out 5 Circuit Diagram 6 PCB Layout Top Layer 7 PCB layout Bottom Layer 8 Component List 9 Boost Choke Layout

PDF Datasheet Preview

Application Note Version
160W PFC Evaluation Board with DCM PFC controller TDA4863-2 and CoolMOS SPP08N50C3

Power Management & Supply

TDA4863-2 SPP08N50C3
<DocNumber> Ver1.0, April 2004_doc_release>

Never stop thinking.
160W PFC Evaluation Board with DCM PFC controller TDA4863-2 and CoolMOS SPP08N50C3

Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
<Docnumber>

April 2004

Confidential
160W PFC Evaluation Board with DCM PFC controller TDA4863-2 and CoolMOS SPP08N50C3

Previous Version:

Junyang Luo Simon Lim Meng Kiat Jeoh

Infineon Technologies Asia Pacific Pte Ltd Infineon Technologies AP All Rights Reserved.

We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal including a reference to this document to:
<Docnumber>

April 2004
160W PFC Evaluation Board with DCM PFC controller TDA4863-2 and CoolMOS SPP08N50C3

Table of Contents

Topics

Abstract
1 Evaluation Board
2 Technical specifications
3 Circuit Description

Line input

Current Sense

PWM control of Boost Converter

Gate Drive Output
4 Circuit Operation

Start up

Protection Features

Output over-voltage protection

IC supply under voltage lock out
5 Circuit Diagram
6 PCB Layout Top Layer
7 PCB layout Bottom Layer
8 Component List
9 Boost Choke Layout

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EVALPFC1-TDA4863-2 Datasheet file may be downloaded here without warranties.

Datasheet ID: EVALPFC1-TDA4863-2 638011