IRAM136-3063B2

IRAM136-3063B2 Datasheet

IRAM136-3063B

Part	Datasheet
IRAM136-3063B2	IRAM136-3063B2 (pdf)

Related Parts	Information
IRAM136-3063B	IRAM136-3063B

PDF Datasheet Preview
IRAM136-3063B Series Integrated Power Hybrid IC for High Voltage Motor Applications 30A, 600V with Internal Shunt Resistor International Rectifier's IRAM136-3063B is a 30A, 600V Integrated Power Hybrid IC with Internal Shunt Resistor for Appliance Motor Drives applications such air conditioning systems and compressor drivers as well as for light industrial application. IR's technology offers an extremely compact, high performance AC motor driver in a single isolated package to simplify design. This advanced HIC is a combination of IR's low VCE on Punch-Through IGBT technology and the industry benchmark 3-Phase high voltage, high speed driver in a fully isolated thermally enhanced package. A builtin temperature monitor and over-current and over-temperature protections, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and failsafe operation. Using a new developed single in line package SiP3 with heat spreader for the power die along with full transfer mold structure minimizes PCB space and resolves isolation problems to heatsink. • Integrated Gate Drivers • Temperature Monitor and Protection • Overcurrent shutdown • Low VCE on Advance Planar Super Rugged Technology • Undervoltage lockout for all channels • Matched propagation delay for all channels • 5V Schmitt-triggered input logic • Cross-conduction prevention logic • Lower di/dt gate driver for better noise immunity • Motor Power up to 3.3kW / 85~253 Vdc • Fully Isolated Package, Isolation 2000VRMS min Absolute Maximum Ratings Parameter Value Units VCES / VRRM V+ IGBT/Diode Blocking Voltage Positive Bus Input Voltage 600 V IO TC=25°C Maximum Output Current IO TC=100°C RMS Phase Current Note 1 Pulsed RMS Phase Current Note 2 FPWM PWM Carrier Frequency Power dissipation per IGBT TC =25°C VISO Isolation Voltage 1min 2000 VRMS TJ IGBT & Diode & IC Maximum Operating Junction Temperature +150 Operating Case Temperature Range -20 to +100 TSTG Storage Temperature Range -40 to +125 Mounting torque Range M4 screw Note 1 Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=6kHz, Modulation Depth=0.8, PF=0.6, See Figure Note 2 tP<100ms TC=25°C FPWM=6kHz. Limited by IBUS-ITRIP, see Table "Inverter Section Electrical Characteristics" IRAM136-3063B Internal Electrical Schematic IRAM136-3063B V+ 10 RS V- 12 VB1 1 U, VS1 2

PDF Datasheet Preview

IRAM136-3063B

Series

Integrated Power Hybrid IC for High Voltage Motor Applications
30A, 600V
with Internal Shunt Resistor

International Rectifier's IRAM136-3063B is a 30A, 600V Integrated Power Hybrid IC with Internal Shunt Resistor for Appliance Motor Drives applications such air conditioning systems and compressor drivers as well as for light industrial application. IR's technology offers an extremely compact, high performance AC motor driver in a single isolated package to simplify design. This advanced HIC is a combination of IR's low VCE on Punch-Through IGBT technology and the industry benchmark 3-Phase high voltage, high speed driver in a fully isolated thermally enhanced package. A builtin temperature monitor and over-current and over-temperature protections, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and failsafe operation. Using a new developed single in line package SiP3 with heat spreader for the power die along with full transfer mold structure minimizes PCB space and resolves isolation problems to heatsink.
• Integrated Gate Drivers
• Temperature Monitor and Protection
• Overcurrent shutdown
• Low VCE on Advance Planar Super Rugged Technology
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• 5V Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise immunity
• Motor Power up to 3.3kW / 85~253 Vdc
• Fully Isolated Package, Isolation 2000VRMS min

Absolute Maximum Ratings

Parameter

Value

Units

VCES / VRRM V+

IGBT/Diode Blocking Voltage Positive Bus Input Voltage
600 V

IO TC=25°C

Maximum Output Current

IO TC=100°C

RMS Phase Current Note 1

Pulsed RMS Phase Current Note 2

FPWM

PWM Carrier Frequency

Power dissipation per IGBT TC =25°C

VISO

Isolation Voltage 1min
2000

VRMS

TJ IGBT & Diode & IC Maximum Operating Junction Temperature
+150

Operating Case Temperature Range
-20 to +100

TSTG

Storage Temperature Range
-40 to +125

Mounting torque Range M4 screw

Note 1 Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=6kHz, Modulation Depth=0.8, PF=0.6, See Figure Note 2 tP<100ms TC=25°C FPWM=6kHz. Limited by IBUS-ITRIP, see Table "Inverter Section Electrical Characteristics"

IRAM136-3063B

Internal Electrical Schematic IRAM136-3063B

V+ 10

RS V- 12

VB1 1

U, VS1 2

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IRAM136-3063B2 Datasheet file may be downloaded here without warranties.

Datasheet ID: IRAM136-3063B2 638309