ICE3GS03LJGXUMA1

ICE3GS03LJGXUMA1 Datasheet

F3 PWM controller ICE3GS03LJG Revision History:

Part	Datasheet
ICE3GS03LJGXUMA1	ICE3GS03LJGXUMA1 (pdf)

PDF Datasheet Preview
Version 2.0a, 8 Nov 2011 Never stop thinking. 2011-11-8 Previous Version: V2.0 Datasheet For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at Edition 2011-11-8 Published by Infineon Technologies AG, 81726 Munich, Germany, 2010 Infineon Technologies AG. All Rights Reserved. Legal disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies Office Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies Office. Infineon Technologies Components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. ICE3GS03LJG Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell Latched and frequency jitter Mode Product Highlights • Active Burst Mode to reach the lowest Standby Power Requirements < 100mW • Built-in latched Off protection Mode and external latch enable function to increase robustness of the system PG-DSO-8 • Built-in and extendable blanking Window for high load jumps to increase system reliability • Frequency jitter for low EMI • Green Mould Compound • Pb-free lead plating RoHS compilant • 500V Startup Cell switched off after Start Up • Active Burst Mode for lowest Standby Power • Fast load jump response in Active Burst Mode • 130kHz internally fixed switching frequency • Built-in Latched Off Protection Mode for The ICE3GS03LJG is the 130KHz version of the ICE3AS03LJG which is the latest version of the F3 controller for lowest standby power and low EMI features with both auto-restart and latch off protection features to enhance the system robustness. It targets for off-Line Overtemperature, Overvoltage & Short Winding battery adapters, and low cost SMPS for low to medium • Auto Restart Protection Mode for Overload, Open power range such as application for the DVD R/W, DVD Loop,VCC Undervoltage & Short Optocoupler Combi, Blue Ray DVD player and recorder, set top box, • Built-in Soft Start charger, note book adapter, etc. The inherited outstanding • Built-in blanking window with extendable blanking features includes 500V startup cell, active burst mode time for short duration high current achieve the lowest standby power i.e. <100mV at no load • External latch off enable function with Vin=265Vac and propagation delay compensation • Max Duty Cycle 75%

PDF Datasheet Preview

Version 2.0a, 8 Nov 2011

Never stop thinking.
2011-11-8

Previous Version:

V2.0

Datasheet

For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at

Edition 2011-11-8

Published by Infineon Technologies AG, 81726 Munich, Germany,
2010 Infineon Technologies AG.

All Rights Reserved.

Legal disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.

Information

For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies Office

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies Office. Infineon Technologies Components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

ICE3GS03LJG

Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell Latched and frequency jitter Mode

Product Highlights
• Active Burst Mode to reach the lowest Standby Power Requirements < 100mW
• Built-in latched Off protection Mode and external latch enable function to increase robustness of the system

PG-DSO-8
• Built-in and extendable blanking Window for high load jumps to
increase system reliability
• Frequency jitter for low EMI
• Green Mould Compound
• Pb-free lead plating RoHS compilant
• 500V Startup Cell switched off after Start Up
• Active Burst Mode for lowest Standby Power
• Fast load jump response in Active Burst Mode
• 130kHz internally fixed switching frequency
• Built-in Latched Off Protection Mode for

The ICE3GS03LJG is the 130KHz version of the ICE3AS03LJG which is the latest version of the F3 controller for lowest standby power and low EMI features with both auto-restart and latch off protection features to enhance the system robustness. It targets for off-Line

Overtemperature, Overvoltage & Short Winding battery adapters, and low cost SMPS for low to medium
• Auto Restart Protection Mode for Overload, Open power range such as application for the DVD R/W, DVD

Loop,VCC Undervoltage & Short Optocoupler Combi, Blue Ray DVD player and recorder, set top box,
• Built-in Soft Start
charger, note book adapter, etc. The inherited outstanding
• Built-in blanking window with extendable blanking features includes 500V startup cell, active burst mode
time for short duration high current
achieve the lowest standby power i.e. <100mV at no load
• External latch off enable function
with Vin=265Vac and propagation delay compensation
• Max Duty Cycle 75%

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICE3GS03LJGXUMA1 Datasheet file may be downloaded here without warranties.

Datasheet ID: ICE3GS03LJGXUMA1 638057