ICE3BS02L

ICE3BS02L Datasheet

ICE3BS02L

Part	Datasheet
ICE3BS02L	ICE3BS02L (pdf)

PDF Datasheet Preview
Datasheet, Version 28 Sep 2005 ICE3BS02L Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell and Latched off Mode Power Management & Supply Never stop thinking. F3 latched off version 2005-09-28 Previous Version: V1.0 Datasheet For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at Edition 2005-09-28 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München Infineon Technologies AG All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. ICE3BS02L Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell and Latched off Mode Product Highlights • Active Burst Mode to reach the lowest Standby Power Requirements < 100mW • Latched Off Mode and Auto Restart Mode to increase robustness and safety of the system PteGs-t DIP-8-6 • Adjustable Blanking Window for high load jumps to increase system reliability • PB-free Plating and RoHS compliant • 500V Startup Cell switched off after Start Up • Active Burst Mode for lowest Standby Power light load controlled by Feedback Signal • Fast load jump response in Active Burst Mode • 67kHz internally fixed switching frequency • Latched Off Mode for Overtemperature Detection • Latched Off Mode for Overvoltage Detection • Latched Off Mode for Short Winding Detection • Auto Restart Mode for Overload and Open Loop • Auto Restart Mode for VCC Undervoltage • Blanking Window for short duration high current • User defined Soft Start • Minimum of external components required • Max Duty Cycle 72% • Overall tolerance of Current Limiting < ±5% • Internal PWM Leading Edge Blanking • Soft driving for low EMI The F3 Controller provides Active Burst Mode to reach the lowest Standby Power Requirements <100mW at no load. As the controller is always active during Active Burst Mode, there is an immediate response on load jumps without any black out in the SMPS. In Active Burst Mode the ripple of the output voltage can be reduced Furthermore, to increase the robustness and safety of the system, the device enters into Latched Off Mode in the cases of Overtemperature, Overvoltage or Short Winding. The Latched Off Mode can only be reset by disconnecting the main line. Auto Restart Mode is entered for cases like open loop or overload. By means of an internal precise peak current limitation, the dimension of the transformer and the secondary diode can be lowered which leads to more cost efficiency. An adjustable blanking window prevents the IC from entering Auto Restart Mode or Active Burst Mode unintentionally in case of high load jumps. 85 270 VAC C Bulk Snubber CVCC Startup Cell Power Management ICE3BS02L

PDF Datasheet Preview

Datasheet, Version 28 Sep 2005

ICE3BS02L

Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell and Latched off Mode

Power Management & Supply

Never stop thinking.

F3 latched off version
2005-09-28

Previous Version:

V1.0

Datasheet

For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or the Infineon Technologies Companies and Representatives worldwide see our webpage at

Edition 2005-09-28

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81541 München

Infineon Technologies AG

All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

ICE3BS02L

Off-Line SMPS Current Mode Controller with integrated 500V Startup Cell and Latched off Mode

Product Highlights
• Active Burst Mode to reach the lowest Standby Power

Requirements < 100mW
• Latched Off Mode and Auto Restart Mode to increase robustness and safety of the system

PteGs-t DIP-8-6
• Adjustable Blanking Window for high load jumps to
increase system reliability
• PB-free Plating and RoHS compliant
• 500V Startup Cell switched off after Start Up
• Active Burst Mode for lowest Standby Power
light load controlled by Feedback Signal
• Fast load jump response in Active Burst Mode
• 67kHz internally fixed switching frequency
• Latched Off Mode for Overtemperature Detection
• Latched Off Mode for Overvoltage Detection
• Latched Off Mode for Short Winding Detection
• Auto Restart Mode for Overload and Open Loop
• Auto Restart Mode for VCC Undervoltage
• Blanking Window for short duration high current
• User defined Soft Start
• Minimum of external components required
• Max Duty Cycle 72%
• Overall tolerance of Current Limiting < ±5%
• Internal PWM Leading Edge Blanking
• Soft driving for low EMI

The F3 Controller provides Active Burst Mode to reach the lowest Standby Power Requirements <100mW at no load. As the controller is always active during Active Burst Mode, there is an immediate response on load jumps without any black out in the SMPS. In Active Burst Mode the ripple of the output voltage can be reduced Furthermore, to increase the robustness and safety of the system, the device enters into Latched Off Mode in the cases of Overtemperature, Overvoltage or Short Winding. The Latched Off Mode can only be reset by disconnecting the main line. Auto Restart Mode is entered for cases like open loop or overload. By means of an internal precise peak current limitation, the dimension of the transformer and the secondary diode can be lowered which leads to more cost efficiency. An adjustable blanking window prevents the IC from entering Auto Restart Mode or Active Burst Mode unintentionally in case of high load jumps.
85 270 VAC

C Bulk

Snubber

CVCC

Startup Cell

Power Management

ICE3BS02L

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICE3BS02L Datasheet file may be downloaded here without warranties.

Datasheet ID: ICE3BS02L 638055