EVW020A0S6R041Z

EVW020A0S6R041Z Datasheet

EVW020A0S6R0 Series Eighth-Brick DC-DC Power Modules

Part	Datasheet
EVW020A0S6R041Z	EVW020A0S6R041Z (pdf)

PDF Datasheet Preview
Data Sheet EVW020A0S6R0 Series Eighth-Brick DC-DC Power Modules Input 6.0Vdc Output 20A Output Current • Compliant to RoHS EU Directive 2011/65/EU Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this produc twill no longer be RoHS compliant non-Z versions • Automated Test Equipment • Wireless PA Pre-amps • Precision Instruments Options • Negative Remote On/Off logic preferred • Over current/Over temperature/Over voltage protections Auto-restart preferred • Heat plate version -H • Surface Mount version -S • Trimmed pin lengths • Compliant to IPC-9592, Category 2, Class II • High efficiency 92% at 6.0Vdc full load Vin=48Vdc • Industry standard, DOSA compliant footprint • ISO**9001 and ISO 14001 certified manufacturing facilities The EVW020A0S6R0, Eighth-brick low-height power module is an isolated dc-dc converters that can deliver up to 20A of output current and provide a precisely regulated output voltage of 6.0Vdc over a wide range of input voltages VIN = 36 75Vdc . The modules achieve typical full load efficiency of The module offers wide output voltage trim 5.0Vdc to 7.0Vdc , allowing designers to use the module with a wide variety of output LDOs for final load voltage. The open frame modules construction, available in both surface-mount and through-hole packaging, enable designers to develop cost and space efficient solutions. Standard features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and overtemperature protection. October 2, 2015 2012 General Electric Company. All rights reserved. Data Sheet EVW020A0S6R0 Series Eighth-Brick DC-DC Power Modules Input 6.0Vdc Output 20A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Transient, operational ms Operating Ambient Temperature see Thermal Considerations section Storage Temperature I/O Isolation voltage 100% factory Hi-Pot tested Device Symbol VIN,trans Tstg Unit 2250 Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max Input No Load Current VIN = VIN, nom, IO = 0, module enabled Input Stand-by Current VIN = VIN, nom, module disabled Inrush Transient Device Symbol Min IIN,max IIN,No load IIN,stand-by Input Reflected Ripple Current, peak-to-peak 5Hz to 20MHz, 1uH source impedance VIN, min to VIN, max, IO= IOmax See Test configuration section Input Ripple Rejection 120Hz Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Product Codes Input Voltage Output Voltage Output Current On/Off Logic Connector Type EVW020A0S6R041Z 48V 36-75Vdc 6.0V Negative Through hole EVW020A0S6R041-HZ 48V 36-75Vdc 6.0V Negative Through hole EVW020A0S6R0841-HZ 48V 36-75Vdc 6.0V Negative Through hole EVW020A0S6R041-SZ 48V 36-75Vdc 6.0V Negative Surface mount Comcodes TBD CC109151833 CC109153680 Table Device Coding Scheme and Options Ratings Characteristic Form Factor Family Designator Input Voltage Output Current Output Voltage Character and Position E V W 020A0 S6R0 Pin Length Action following Protective Shutdown On/Off Logic Definition E = Eighth Brick

PDF Datasheet Preview

Data Sheet

EVW020A0S6R0 Series Eighth-Brick DC-DC Power Modules

Input 6.0Vdc Output 20A Output Current
• Compliant to RoHS EU Directive 2011/65/EU Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this produc twill no longer be RoHS compliant non-Z versions
• Automated Test Equipment
• Wireless PA Pre-amps
• Precision Instruments

Options
• Negative Remote On/Off logic preferred
• Over current/Over temperature/Over voltage
protections Auto-restart preferred
• Heat plate version -H
• Surface Mount version -S
• Trimmed pin lengths
• Compliant to IPC-9592, Category 2, Class II
• High efficiency 92% at 6.0Vdc full load Vin=48Vdc
• Industry standard, DOSA compliant footprint
• ISO**9001 and ISO 14001 certified manufacturing facilities

The EVW020A0S6R0, Eighth-brick low-height power module is an isolated dc-dc converters that can deliver up to 20A of output current and provide a precisely regulated output voltage of 6.0Vdc over a wide range of input voltages VIN = 36 75Vdc . The modules achieve typical full load efficiency of The module offers wide output voltage trim 5.0Vdc to 7.0Vdc , allowing designers to use the module with a wide variety of output LDOs for final load voltage. The open frame modules construction, available in both surface-mount and through-hole packaging, enable designers to develop cost and space efficient solutions. Standard features include remote On/Off, remote sense, output voltage adjustment, overvoltage, overcurrent and overtemperature protection.

October 2, 2015
2012 General Electric Company. All rights reserved.

Data Sheet

EVW020A0S6R0 Series Eighth-Brick DC-DC Power Modules

Input 6.0Vdc Output 20A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Transient, operational ms Operating Ambient Temperature see Thermal Considerations section

Storage Temperature I/O Isolation voltage 100% factory Hi-Pot tested

Device Symbol

VIN,trans

Tstg

Unit
2250

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max Input No Load Current

VIN = VIN, nom, IO = 0, module enabled Input Stand-by Current

VIN = VIN, nom, module disabled

Inrush Transient

Device Symbol Min

IIN,max

IIN,No load

IIN,stand-by

Input Reflected Ripple Current, peak-to-peak
5Hz to 20MHz, 1uH source impedance VIN, min to VIN, max, IO=

IOmax See Test configuration section

Input Ripple Rejection 120Hz
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Product Codes

Input Voltage

Output Voltage

Output Current

On/Off Logic

Connector Type

EVW020A0S6R041Z
48V 36-75Vdc
6.0V

Negative

Through hole

EVW020A0S6R041-HZ
48V 36-75Vdc
6.0V

Negative

Through hole

EVW020A0S6R0841-HZ
48V 36-75Vdc
6.0V

Negative

Through hole

EVW020A0S6R041-SZ
48V 36-75Vdc
6.0V

Negative

Surface mount

Comcodes

TBD CC109151833 CC109153680

Table Device Coding Scheme and Options

Ratings

Characteristic

Form Factor Family Designator Input Voltage Output Current Output Voltage

Character and Position

E V W 020A0 S6R0

Pin Length

Action following Protective Shutdown On/Off Logic

Definition

E = Eighth Brick

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EVW020A0S6R041Z Datasheet file may be downloaded here without warranties.

Datasheet ID: EVW020A0S6R041Z 645643