BTS707

BTS707 Datasheet

BTS 707

Part	Datasheet
BTS707	BTS707 (pdf)

PDF Datasheet Preview
BTS 707 Smart Two Channel Highside Power Switch • Overload protection • Current limitation • Short-circuit protection • Thermal shutdown • Overvoltage protection • Fast demagnetization of inductive loads Product Summary Overvoltage Protection Operating voltage active channels On-state resistance RON Nominal load current IL NOM Vbb AZ Vbb on one 250 • Open drain diagnostic output • Open load detection in OFF-state • CMOS compatible input • Loss of ground and loss of Vbb protection • Electrostatic discharge ESD protection two parallel Application • µC compatible power switch with diagnostic feedback for 12 V and 24 V DC grounded loads • Most suitable for inductive loads • Replaces electromechanical relays, fuses and discrete circuits N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart technology. Providing embedded protective functions. Pin Definitions and Functions Pin 1,10, 11,12, 15,16, 19,20 3 7 17,18 13,14 2 6 5,9 Symbol Vbb IN1 IN2 OUT1 OUT2 ST1 ST2 GND1 GND2 N.C. Function Positive power supply voltage. Design the wiring for the simultaneous max. short circuit currents from channel 1 to 2 and also for low thermal resistance Input 1,2, activates channel 1,2 in case of logic high signal Output 1,2, protected high-side power output of channel Design the wiring for the max. short circuit current Diagnostic feedback 1,2 of channel 1,2, open drain, low in on state on failure or high in off state on failure Ground 1 of chip 1 channel 1 Ground 2 of chip 2 channel 2 Not Connected Pin configuration top view Vbb GND1 IN1 ST1 N.C. GND2 IN2 ST2 N.C. Vbb 1• 2 3 4 5 6 7 8 9 10 20 Vbb 19 Vbb 18 OUT1 17 OUT1 16 Vbb 15 Vbb 14 OUT2 13 OUT2 12 Vbb 11 Vbb Semiconductor Group 1 of 12 2003-Oct-01 Block diagram 3 IN1 Voltage source VLogic Voltage Package and Ordering Code Standard P-DSO-20-9 BTS 707 Ordering Code Q67060-S7010-A2 All dimensions in millimetres 1 Does not include plastic or metal protrusions of max per side 2 Does not include dambar protrusion of max per side Definition of soldering point with temperature Ts upper side of solder edge of device pin Pin 15 Printed circuit board FR4, 1.5mm thick, one layer 70µm, 6cm2 active heatsink area as a reference for max. power dissipation Ptot, nominal load current IL NOM and thermal resistance Rthja BTS 707 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München Infineon Technologies AG 2001 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that lifesupport device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Semiconductor Group 2003-Oct-01

PDF Datasheet Preview

BTS 707

Smart Two Channel Highside Power Switch
• Overload protection
• Current limitation
• Short-circuit protection
• Thermal shutdown
• Overvoltage protection
• Fast demagnetization of inductive loads

Product Summary Overvoltage Protection Operating voltage
active channels On-state resistance RON Nominal load current IL NOM

Vbb AZ Vbb on
one 250
• Open drain diagnostic output
• Open load detection in OFF-state
• CMOS compatible input
• Loss of ground and loss of Vbb protection
• Electrostatic discharge ESD protection
two parallel

Application
• µC compatible power switch with diagnostic feedback for 12 V and 24 V DC grounded loads
• Most suitable for inductive loads
• Replaces electromechanical relays, fuses and discrete circuits

N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart technology. Providing embedded protective functions.

Pin Definitions and Functions

Pin 1,10, 11,12, 15,16, 19,20 3 7 17,18 13,14
2 6 5,9

Symbol Vbb

IN1 IN2 OUT1 OUT2

ST1 ST2

GND1 GND2 N.C.

Function Positive power supply voltage. Design the
wiring for the simultaneous max. short circuit currents from channel 1 to 2 and also for low thermal resistance Input 1,2, activates channel 1,2 in case of logic high signal Output 1,2, protected high-side power output of channel Design the wiring for the max. short circuit current Diagnostic feedback 1,2 of channel 1,2, open drain, low in on state on failure or high in off state on failure Ground 1 of chip 1 channel 1 Ground 2 of chip 2 channel 2 Not Connected

Pin configuration top view

Vbb GND1

IN1 ST1 N.C. GND2 IN2 ST2 N.C. Vbb
1•
2 3 4 5 6 7 8 9 10
20 Vbb 19 Vbb 18 OUT1
17 OUT1
16 Vbb 15 Vbb 14 OUT2
13 OUT2
12 Vbb 11 Vbb

Semiconductor Group
1 of 12
2003-Oct-01

Block diagram
3 IN1

Voltage source

VLogic

Voltage
Package and Ordering Code

Standard P-DSO-20-9

BTS 707
Ordering Code Q67060-S7010-A2

All dimensions in millimetres 1 Does not include plastic or metal protrusions of max per side 2 Does not include dambar protrusion of max per side

Definition of soldering point with temperature Ts upper side of solder edge of device pin

Pin 15

Printed circuit board FR4, 1.5mm thick, one layer 70µm, 6cm2 active heatsink area as a reference for max. power dissipation Ptot, nominal load current IL NOM and thermal resistance Rthja

BTS 707

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München Infineon Technologies AG 2001 All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that lifesupport device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Semiconductor Group
2003-Oct-01

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BTS707 Datasheet file may be downloaded here without warranties.

Datasheet ID: BTS707 637948