BTS442E2 E3043

BTS442E2 E3043 Datasheet

BTS 442 E2

Part	Datasheet
BTS442E2 E3043	BTS442E2 E3043 (pdf)

PDF Datasheet Preview
BTS 442 E2 Smart Highside Power Switch auto-restart and hysteresis • Open drain diagnostic output • Open load detection in ON-state • CMOS compatible input • Loss of ground and loss of Vbb protection2 • Electrostatic discharge ESD protection Product Summary Overvoltage protection Operating voltage On-state resistance Load current ISO Current limitation Vbb AZ Vbb on RON IL ISO IL SCr 63 V 42 V 18 21 A 70 A TO-220AB/5 Standard 1 Straight leads Application • µC compatible power switch with diagnostic feedback for 12 V and 24 V DC grounded loads • All types of resistive, inductive and capacitve loads • Replaces electromechanical relays and discrete circuits N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, integrated in Smart chip on chip technology. Providing embedded protective functions. Voltage source V Logic Voltage sensor Logic + Vbb 3 Overvoltage Current Gate protection limit protection Charge pump Level shifter Rectifier Limit for unclamped ind. loads Open load detection Temperature sensor Load Short circuit detection Signal GND Load GND Semiconductor Group 1 of 14 2003-Oct-01 BTS 442 E2 Function - Logic ground I Input, activates the power switch in case of logical high signal + Positive power supply voltage, the tab is shorted to this pin S Diagnostic feedback, low on failure Package and Ordering Code All dimensions in mm Standard TO-220AB/5 BTS 442 E2 Ordering code Q67060-S6206-A2 BTS 442 E2 TO-220AB/5, Option E3043 Ordering code BTS 442 E2 E3043 Q67060-S6206-A3 SMD TO-220AB/5, Opt. E3062 Ordering code BTS442E2 E3062A T&R Q67060-S6206-A4 Semiconductor Group 2003-Oct-01 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München Infineon Technologies AG 2001 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that lifesupport device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BTS 442 E2 Semiconductor Group 2003-Oct-01

PDF Datasheet Preview

BTS 442 E2

Smart Highside Power Switch
auto-restart and hysteresis
• Open drain diagnostic output
• Open load detection in ON-state
• CMOS compatible input
• Loss of ground and loss of Vbb protection2
• Electrostatic discharge ESD protection

Product Summary Overvoltage protection Operating voltage On-state resistance Load current ISO Current limitation

Vbb AZ Vbb on RON IL ISO IL SCr
63 V 42 V
18 21 A 70 A

TO-220AB/5

Standard
1 Straight leads

Application
• µC compatible power switch with diagnostic feedback for 12 V and 24 V DC grounded loads
• All types of resistive, inductive and capacitve loads
• Replaces electromechanical relays and discrete circuits

N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, integrated in Smart chip on chip technology. Providing embedded protective functions.

Voltage source

V Logic Voltage sensor

Logic
+ Vbb 3

Overvoltage Current

Gate
protection
limit
protection

Charge pump Level shifter

Rectifier

Limit for unclamped ind. loads

Open load detection

Temperature sensor

Load

Short circuit detection

Signal GND

Load GND

Semiconductor Group
1 of 14
2003-Oct-01

BTS 442 E2

Function
- Logic ground

I Input, activates the power switch in case of logical high signal
+ Positive power supply voltage,
the tab is shorted to this pin

S Diagnostic feedback, low on failure
Package and Ordering Code

All dimensions in mm

Standard TO-220AB/5

BTS 442 E2
Ordering code Q67060-S6206-A2

BTS 442 E2
TO-220AB/5, Option E3043 Ordering code

BTS 442 E2 E3043

Q67060-S6206-A3
SMD TO-220AB/5, Opt. E3062 Ordering code

BTS442E2 E3062A T&R Q67060-S6206-A4

Semiconductor Group
2003-Oct-01

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München Infineon Technologies AG 2001 All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that lifesupport device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

BTS 442 E2

Semiconductor Group
2003-Oct-01

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BTS442E2E3043 Datasheet file may be downloaded here without warranties.

Datasheet ID: BTS442E2E3043 637908