SIO1036-ZG

SIO1036-ZG Datasheet


SIO1036

Part Datasheet
SIO1036-ZG SIO1036-ZG SIO1036-ZG (pdf)
PDF Datasheet Preview
SIO1036

Super I/O with LPC Interface with FIR and Consumer IR Support

PRODUCT FEATURES

Data Brief
- Volt Operation 5V tolerant - GPIOs 1 - XNOR Chain - PC99a, PC2001 - 36-pin QFN Lead-free RoHS Compliant Package - Intelligent Auto Power Management - Infrared Communications Controllers

One IR Port Multi-Protocol Serial Communications Controllers IrDA v1.2 4Mbps , HPSIR, ASKIR, Consumer IR

Support Multiple Base I/O Address options, 15 IRQ Options and
3 DMA Options Two Pin Serial Port UART Support
- Multi-Mode Parallel Port with ChiProtect

Standard Mode IBM and PS/2 Compatible Bidirectional Parallel Port

Enhanced Parallel Port EPP Compatible - EPP and EPP IEEE 1284 Compliant

IEEE 1284 Compliant Enhanced Capabilities Port ECP

ChiProtect Circuitry for Protection Against Damage Due to Printer Power-On
192 Base I/O Address, 15 IRQ and 3 DMA Options
- LPC Bus Host Interface

Multiplexed Command, Address and Data Bus 8-Bit I/O Transfers 8-Bit DMA Transfers 16-Bit Address Qualification Serial IRQ Interface Compatible with Serialized IRQ

Support for PCI Systems PCI CLKRUN# Support

ORDER NUMBER SIO1036-ZG FOR 36 PIN, QFN LEAD-FREE ROHS COMPLIANT PACKAGE

SMSC SIO1036

PRODUCT PREVIEW

Super I/O with LPC Interface with FIR and Consumer IR Support
80 ARKAY DRIVE, HAUPPAUGE, NY 11788 631 435-6000, FAX 631 273-3123

Copyright 2007 SMSC or its subsidiaries. All rights reserved.

Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order the "Terms of Sale Agreement" . The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at SMSC is a registered trademark of Standard Microsystems Corporation “SMSC” . Product names and company names are the trademarks of their respective holders.

PRODUCT PREVIEW

SMSC SIO1036

Super I/O with LPC Interface with FIR and Consumer IR Support

The SMSC SIO1036 is a 3.3V PC 99, PC2001 compliant Super I/O Controller. The SIO1036 implements the LPC interface, a pin reduced ISA interface which provides the same or better performance as the ISA/X-bus with a substantial savings in pins used. The part also includes 1 GPIO pin.

The SIO1036 incorporates a Multi-Mode parallel port with ChiProtect circuitry plus EPP and ECP support. The parallel port is compatible with IBM PC/AT architectures, as well as IEEE 1284 EPP and ECP. The parallel port ChiProtect circuitry prevents damage caused by an attached powered printer when the SIO1036 is not powered.

The SIO1036 offers a full 16-bit internally decoded address bus, a Serial IRQ interface with PCI CLKRUN# support, relocatable configuration ports, and three DMA channel options.

There is a dedicated Serial Infrared interface UART, which complies with IrDA v1.2 Fast IR , HPSIR, and ASKIR formats used by Sharp and other PDAs , as well as Consumer IR. This can also be used as a 2 pin UART.

The SIO1036 features Software Configurable Logic SCL for ease of use. SCL allows programmable system configuration of key functions such as the parallel port and UART.

The SIO1036 supports the ISA Plug-and-Play Standard register set Version 1.0a and provides the recommended functionality to support Windows operating systems, PC99, and PC2001. The I/O Address, DMA Channel, and Hardware IRQ of each device in the SIO1036 may be reprogrammed through the internal configuration registers. There are multiple I/O address location options, a Serialized IRQ interface, and three DMA channels.

WDT SMI CONTROL, ADDRESS, DATA

SER_IRQ

PCI_CLK

LAD0 LAD1 LAD2 LAD3 LFRAME# LDRQ# PCI_RESET#

LPCPD#

CLKRUN#

SERIAL IRQ

LPC BUS INTERFACE
More datasheets: MAX11835TEVS+ | KA5M0365RN | KA5L0365RN | RTV103-85ML | RTV103-300ML | LTP-757G | PS4160-3 | PS4160-4 | DBMAE25PF0 | SPC5743RK1MLU5


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SIO1036-ZG Datasheet file may be downloaded here without warranties.

Datasheet ID: SIO1036-ZG 648199