BTS4141D
BTS4141D Datasheet
BTS 4141D
| Part | Datasheet |
|---|---|
BTS4141D |
BTS4141D (pdf) |
| PDF Datasheet Preview |
|---|
| Smart High-Side Power Switch 1 Channel 1 x BTS 4141D Product Summary • Short circuit protection Overvoltage protection • Current limitation Operating voltage • Overload protection On-state resistance • Overvoltage protection including load dump • Undervoltage shutdown with auto- restart and hysteresis • Switching inductive loads • Clamp of negative voltage at output with inductive loads • CMOS compatible input • Thermal shutdown with restart • ESD - Protection • Loss of GND and loss of Vbb protection • Very low standby current • Improved electromagnetic compatibility EMC Vbb AZ Vbb on RON P-TO252-5-1 Application • All types of resistive, inductive and capacitive loads • µC compatible power switch for 12 V and 24 V DC applications • Replaces electromechanical relays and discrete circuits N channel vertical power FET with charge pump, ground referenced CMOS compatible input, monolithically integrated in Smart technology. Providing embedded protective functions. 2004-01-27 BTS 4141D Block Diagram 5 IN Rin Voltage source VLogic Voltage sensor Logic Overvoltage protection Current Gate limit protection + Vbb TAB/3 Charge pump Level shifter Rectifier Limit for unclamped ind. loads Temperature sensor Load Signal GND Package and ordering code all dimensions in mm Sales code Ordering code, BTS 4141D Q67060-S6098 BTS 4141D max per side 5x0.6 All metal surfaces tin plated, except area of cut. Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München Infineon Technologies AG 2001 All Rights Reserved. GPT09161 Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Page 19 2004-01-27 |
| More datasheets: VW2X45-14IO1 | VW2X45-16IO1 | VW2X45-08IO1 | APTM120A80FT1G | SPB35N10 | SPB35N10T | SPB35N10 G | MDM-21SH004L | VDIP2 | DSTINIM400# |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BTS4141D Datasheet file may be downloaded here without warranties.