DSTINIM400#
DSTINIM400# Datasheet
The DSTINIm400# is a fully assembled and tested circuit board that evaluates the DS80C400 network microcontroller. In addition to the DS80C400, the DSTINIm400# includes a real-time clock, 1MB flash, 1MB static RAM, and support for an external Ethernet PHY for connecting to a wide variety of networks. The circuit board is designed as a module to be plugged into a 144-pin SODIMM connector. For evaluation, the DSTINIm400# can be inserted into the DSTINIs400 socket board. The combination of the two boards allows full evaluation of the features of the DS80C400 using an Ethernet network.
| Part | Datasheet |
|---|---|
DSTINIM400# |
DSTINIM400# (pdf) |
| PDF Datasheet Preview |
|---|
| The DSTINIm400# is a fully assembled and tested circuit board that evaluates the DS80C400 network microcontroller. In addition to the DS80C400, the DSTINIm400# includes a real-time clock, 1MB flash, 1MB static RAM, and support for an external Ethernet PHY for connecting to a wide variety of networks. The circuit board is designed as a module to be plugged into a 144-pin SODIMM connector. For evaluation, the DSTINIm400# can be inserted into the DSTINIs400 socket board. The combination of the two boards allows full evaluation of the features of the DS80C400 using an Ethernet network. Detailed information about the initial setup process and use of the TINI platform is contained in Application Note 612 Getting Started with the TINIm400 DS80C400 Verification Module. ORDERING INFORMATION PART DSTINIm400# TEMP RANGE DIMENSIONS Replaced with DSTINIm400# Room temp Approx. 67mm x 48mm, 144 SODIMM Note To evaluate the DS80C400, order the DS80C400-KIT. The DSTINIm400 is an evaluation board and is only tested to prototype standards. It is not tested for use in a production product. # Denotes a RoHS-compliant device that may contain lead exempt under the RoHS requirements. TINI and 1-Wire are registered trademarks of Dallas Semiconductor. COMPONENT LIST DESIGNATION QTY C17, C18 C6, C7 C19, C20 BT1 DN1 0.1uF, ±20%, 10V ceramic capacitors 0805 27pF, ±20%, 50V C0G ceramic capacitors 0805 1.0uF, ±20%, 10V ceramic capacitor 1206 4.7uF, ±20%, 10V ceramic capacitor 1206 47uF, ±20%, tantalum capacitors C 1 CR1632 3V lithium cell 1 BAT54S diode SOT23 DSTINIm400 Networked Microcontroller Evaluation Board Hosts the Runtime Environment in Validated Hardware Design in Conjunction with the DSTINIs400 Industry Standard MII Interface to Connects to Network Interfaces Including 10/100 Base-T, Optical, and HomePNA Three Hardware Serial Ports Integrated Network Master CAN 2.0B Port Real-Time Clock for Time Stamping 1MB Flash ROM for Application Storage 1MB NV SRAM for Data Storage 3.3V Single-Supply Operation Fully Assembled and Tested Design DESIGNATION DS1 Q1, Q3 Q2 R1, R4, R7, R8 R2 R3 R5 QTY 1 2 SML-LX23SRC Lumex LED BSS84 P-Channel FET SOT23 2N7002 N-Channel FET SOT23 10kΩ, ±5% resistors 0805 1.5kΩ, ±5% resistor 0805 1kΩ, ±5% resistor 0805 2.2kΩ, ±5% resistor 0805 1 of 5 DSTINIm400 Networked Microcontroller Evaluation Board COMPONENT LIST continued DESIGNATION QTY R6 U1 U2, U3 U4 U5, U6 1 ±5% resistor 0805 DS80C400-FNY# networked microcontroller R1LV0408CSB-7LC 512kB RAM 1 AM29LV081B-70EC 1MB flash MAX6365PKA31 reset controllers |
| More datasheets: VW2X45-12IO1 | VW2X45-14IO1 | VW2X45-16IO1 | VW2X45-08IO1 | APTM120A80FT1G | SPB35N10 | SPB35N10T | SPB35N10 G | MDM-21SH004L | VDIP2 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DSTINIM400# Datasheet file may be downloaded here without warranties.