SD5620-001

SD5620-001 Datasheet

SD5620/5630

Part	Datasheet
SD5620-001	SD5620-001 (pdf)

Related Parts	Information
SD5620-002	SD5620-002
SD5630-001	SD5630-001
SD5630-002	SD5630-002

PDF Datasheet Preview
SD5620/5630 Optoschmitt Detector FEATURES • TO-46 metal can package • nominal acceptance angle • TTL/LSTTL/CMOS compatible • High noise immunity output • Buffer SD5620 or inverting SD5630 logic available • Two sensitivity ranges • Mechanically and spectrally matched to SE3450/5450, SE3455/5455 and SE3470/5470 infrared emitting diodes DESCRIPTION The SD5620/5630 series is family of single chip Optoschmitt IC detectors mounted in a TO-46 metal can package. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with a 10 nominal pull-up resistor. Output rise and fall times are independent of rate of change of incident light. Detector sensitivity has been internally temperature compensated. The TO-46 package is ideally suited for operation in hostile environments. Device Polarity Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level. INFRA-81.TIF OUTLINE DIMENSIONS in inches mm Tolerance 3 plc decimals 2 plc decimals DIM_025.cdr Honeywell reserves the right to make changes in order to improve design and supply the best products possible. SD5620/5630 Optoschmitt Detector ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS ABSOLUTE MAXIMUM RATINGS Free-Air Temperature unless otherwise noted Supply Voltage 16 V [À] Duration of Output Short to VÙÙ or Ground sec. Output Current 18 mA Operating Temperature Range Storage Temperature Range Soldering Temperature 10 sec Notes Derate linearly from to 7 V at SCHEMATIC Honeywell reserves the right to make changes in order to improve design and supply the best products possible. SD5620/5630 Optoschmitt Detector SCHEMATIC SCH_015.cdr SWITCHING TIME TEST CIRCUIT cir_007.cdr SWITCHING WAVEFORM FOR BUFFERS cir_013.cdr SWITCHING WAVEFORM FOR INVERTERS

PDF Datasheet Preview

SD5620/5630

Optoschmitt Detector

FEATURES
• TO-46 metal can package
• nominal acceptance angle
• TTL/LSTTL/CMOS compatible
• High noise immunity output
• Buffer SD5620 or inverting SD5630 logic
available
• Two sensitivity ranges
• Mechanically and spectrally matched to

SE3450/5450, SE3455/5455 and SE3470/5470 infrared emitting diodes

DESCRIPTION The SD5620/5630 series is family of single chip Optoschmitt IC detectors mounted in a TO-46 metal can package. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with a 10 nominal pull-up resistor. Output rise and fall times are independent of rate of change of incident light. Detector sensitivity has been internally temperature compensated. The TO-46 package is ideally suited for operation in hostile environments.

Device Polarity Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level.

INFRA-81.TIF

OUTLINE DIMENSIONS in inches mm Tolerance 3 plc decimals
2 plc decimals

DIM_025.cdr

Honeywell reserves the right to make changes in order to improve design and supply the best products possible.

SD5620/5630

Optoschmitt Detector

ELECTRICAL CHARACTERISTICS PARAMETER

SYMBOL MIN TYP MAX UNITS

TEST CONDITIONS

ABSOLUTE MAXIMUM RATINGS

Free-Air Temperature unless otherwise noted

Supply Voltage
16 V [À]

Duration of Output

Short to VÙÙ or Ground
sec.

Output Current
18 mA

Operating Temperature Range

Storage Temperature Range

Soldering Temperature 10 sec

Notes Derate linearly from to 7 V at

SCHEMATIC

Honeywell reserves the right to make changes in order to improve design and supply the best products possible.

SD5620/5630

Optoschmitt Detector

SCHEMATIC

SCH_015.cdr

SWITCHING TIME TEST CIRCUIT
cir_007.cdr

SWITCHING WAVEFORM FOR BUFFERS
cir_013.cdr

SWITCHING WAVEFORM FOR INVERTERS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SD5620-001 Datasheet file may be downloaded here without warranties.

Datasheet ID: SD5620-001 636517