HOA2005-001

HOA2005-001 Datasheet

HOA2005

Part	Datasheet
HOA2005-001	HOA2005-001 (pdf)

PDF Datasheet Preview
HOA2005 Transmissive Optoschmitt Sensor FEATURES • Direct TTL interface • Buffer logic • Side mount package • Ambient light and dust protective filter • Accurate position sensing • in. 0.25mm aperture windows • in. 3.18 mm slot width • in. 610 mm min. 26 AWG UL 1429 wire leads DESCRIPTION The HOA2005 consists of an infrared emitting diode facing an Optoschmitt detector encased in a black thermoplastic housing. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with 10 nominal pullup resistor. The buffer logic provides a high output when the optical path is clear, and a low output when the path is blocked.The side mounting package is useful in applications in which the interruptive element is parallel to the mounting plane. Both emitter and detector have a in. .25 mm x in. 1.52 mm vertical aperture. This feature is ideal for use in applications in which maximum postion resolution is desired. All devices employ a built- in strain relief for maximum wire attachment strength. The sensor housing contains IR transmissive optical windows. This arrangement provides excellent protection against ambient light while eliminating aperture openings which could be clogged by airborne contaminants. The HOA2005 series employs plastic molded components. For additional component information see SEP8506, and SDP8600. Housing material is polycarbonate. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol. Wire color and functions are: Red - IRED Anode Black - IRED Cathode Green - Detector Ground White - Detector Vcc Blue - Detector Output INFRA-90.TIF OUTLINE DIMENSIONS in inches mm Tolerance 3 plc decimals 2 plc decimals DIM_063.cdr Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HOA2005 Transmissive Optoschmitt Sensor ELECTRICAL CHARACTERISTICS PARAMETER IR EMITTER SYMBOL MIN TYP MAX UNITS DETECTOR TEST CONDITIONS COUPLED CHARACTERISTICS ABSOLUTE MAXIMUM RATINGS Free-Air Temperature unless otherwise noted Operating Temperature Range Storage Temperature Range Soldering Temperature 5 sec IR EMITTER Power Dissipation 100 mW [À] Continuous Forward Current 50 mA DETECTOR Supply Voltage Output Sink Current 18 mA Duration of Output Short to VÙÙ or Ground SCHEMATIC Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HOA2005

PDF Datasheet Preview

HOA2005

Transmissive Optoschmitt Sensor

FEATURES
• Direct TTL interface
• Buffer logic
• Side mount package
• Ambient light and dust protective filter
• Accurate position sensing
• in. 0.25mm aperture windows
• in. 3.18 mm slot width
• in. 610 mm min. 26 AWG UL 1429 wire
leads

DESCRIPTION The HOA2005 consists of an infrared emitting diode facing an Optoschmitt detector encased in a black thermoplastic housing. The photodetector consists of a photodiode, amplifier, voltage regulator, Schmitt trigger and an NPN output transistor with 10 nominal pullup resistor. The buffer logic provides a high output when the optical path is clear, and a low output when the path is blocked.The side mounting package is useful in applications in which the interruptive element is parallel to the mounting plane. Both emitter and detector have a in. .25 mm x in. 1.52 mm vertical aperture. This feature is ideal for use in applications in which maximum postion resolution is desired.

All devices employ a built- in strain relief for maximum wire attachment strength. The sensor housing contains IR transmissive optical windows. This arrangement provides excellent protection against ambient light while eliminating aperture openings which could be clogged by airborne contaminants. The HOA2005 series employs plastic molded components. For additional component information see SEP8506, and SDP8600.

Housing material is polycarbonate. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol.

Wire color and functions are:

Red - IRED Anode Black - IRED Cathode Green - Detector Ground White - Detector Vcc Blue - Detector Output

INFRA-90.TIF

OUTLINE DIMENSIONS in inches mm Tolerance 3 plc decimals
2 plc decimals

DIM_063.cdr

Honeywell reserves the right to make changes in order to improve design and supply the best products possible.

HOA2005

Transmissive Optoschmitt Sensor

ELECTRICAL CHARACTERISTICS PARAMETER

IR EMITTER

SYMBOL MIN TYP MAX UNITS

DETECTOR

TEST CONDITIONS

COUPLED CHARACTERISTICS

ABSOLUTE MAXIMUM RATINGS

Free-Air Temperature unless otherwise noted

Operating Temperature Range

Storage Temperature Range

Soldering Temperature 5 sec

IR EMITTER

Power Dissipation
100 mW [À]

Continuous Forward Current
50 mA

DETECTOR

Supply Voltage

Output Sink Current
18 mA

Duration of Output

Short to VÙÙ or Ground

SCHEMATIC

Honeywell reserves the right to make changes in order to improve design and supply the best products possible.

HOA2005

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HOA2005-001 Datasheet file may be downloaded here without warranties.

Datasheet ID: HOA2005-001 636491