HFE7060-200I
HFE7060-200I Datasheet
HFE7060-200
| Part | Datasheet |
|---|---|
HFE7060-200I |
HFE7060-200I (pdf) |
| PDF Datasheet Preview |
|---|
| Fiber Optic Components 125 Mbps, 650 nm LED HFE7060-200 The HFE7060-200 is a 125 Mbps LED designed to meet data transmission requirements in factory or office automation. The 650 nm wavelength provides operation in the low attenuation area of POF Plastic Optical Fiber fibers. The metal SMA housing gives the user a cost-effective module which can be easily mounted on the PCB while also offering improved mechanical robustness and EMC protection versus plastic packages. The HFE7060-200 is designed to work with Honeywell’s high speed receivers HFD7000-XXX. Application • Data transmission in factory automation and office • High speed and short distance link • Super bright LED for optical fiber Communication • Integrated lens provides maximum coupling into plastic fibers • High power output at 650 nm • High speed 125 Mbps • High reliability • Designed to meet SERCOS requirement Dimensions Honeywell reserves the right to make changes at any time in order to improve design and supply the best products possible. Honeywell Sensing & Control 1985 Douglas Drive North Minneapolis, MN 55422 Honeywell International INC. All rights reserved Aug 2016 HelpHineglYpoinugCYoonturoCl oYnoutrroWl Yoroludr World Fiber Optic Components 125 Mbps, 650 nm LED HFE7060-210 with plastic housing HFE7060-200 HFE7060-210i with plastic housing HFE7060-200 with metal housing NOTICE PRELIMINARY DOCUMENTATION The information contained in this document is preliminary and for reference only. Preliminary means that the product described has not been or is currently being formally tested. Specifications are subject to change without notice. Reliance on the information contained herein is at the reader’s own risk. WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet or catalogue is for reference only. DO NOT USE this document as product installation information. • Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Honeywell reserves the right to make changes at any time in order to improve design and supply the best products possible. Honeywell Sensing & Control 1985 Douglas Drive North Minneapolis, MN 55422 Honeywell International INC. All rights reserved Aug 2016 HelpHineglYpoinugCYoonturoCl oYnoutrroWl Yoroludr World Fiber Optic Components 125 Mbps, 650 nm LED HFE7060-200 Absolute maximum ratings Ta = 25°C Storage condition Symbol IF VR P max T Sold T opr T stg Rating 40 mA 250mW 250°C 5s at least 1,8mm away from package surface, once only to +85°C [-40°F to +185°F] to +85°C [-40°F to +185°F] MSL level 3 - the LED shall be soldered 168h max after opening the sealed bag at storage conditions of < 30°C, <60%rh Electrical and Optical Characteristics Ta = 25°C [77°F] Test Condition NRZ 3 |
| More datasheets: TSMBJ1005C-072 | RT 500 | DBMMV5H5PN | SMBTA64E6327 | LCD0821 | APT10SCE120B | DEMG9SNA197 | MV8R03 | MV8R01 | MAX14592EEWE+T |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HFE7060-200I Datasheet file may be downloaded here without warranties.