HFD3022-002/ABA

HFD3022-002/ABA Datasheet

HFD3022-002/XXX

Part	Datasheet
HFD3022-002/ABA	HFD3022-002/ABA (pdf)

Related Parts	Information
HFD3022-002/BBA	HFD3022-002/BBA
HFD3022-002	HFD3022-002

PDF Datasheet Preview
HFD3022-002/XXX Silicon PIN Photodiode FEATURES • Low capacitance • High speed = 30 ns max. 5 V • Housing electrically isolated • Wave solderable • Mounting options SMA single hole ST single hole SMA PCB ST PCB SMA 4 hole DESCRIPTION The HFD3022-002/XXX PIN Photodiode is designed for high speed use in fiber optic receivers. It has a large area detector, providing efficient response to 50 - 1000 mm diameter fibers at wavelengths of 750 to 950 nanometers. The HFD3022-002/XXX is comprised of an HFD3022 PIN photodiode which is mounted in a fiber optic connector which aligns the component's optical axis with the axis of the optical fiber. The HFD3022-002/XXXs case is electrically isolated from the anode and cathode terminals to enhance the EMI/RFI shielding which increases the sensitivity and speed. The housing acts as a shield for the PIN photodiode component. Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HFD3022-002/XXX Silicon PIN Photodiode ELECTRO-OPTICAL CHARACTERISTICS TÙ = unless otherwise stated PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Peak Response Wavelength Flux Responsivity [À] = 850 nm 50 µm core fiber, µA 100 µm core fiber, µA 200 µm core fiber, µA 1000 µm core fiber, µA Dark Leakage Current Vß = 5 V 110 250 Iß = 10 µA Package Capacitance Vß = 5 V, f = 1 MHz Rise Time 10-90% 17 30 Vß = 5 V Vß = 15 V Vß = 90 V Field of View Degrees Notes Responsivity is measured with a fiber optic cable centered on the mechanical axis, using an 850 nm HFE4000 LED as the optical source to the fiber. The fiber length is nominally 3 meters. ABSOLUTE MAXIMUM RATINGS Tcase = unless otherwise noted Storage temperature -40 to Operating temperature

PDF Datasheet Preview

HFD3022-002/XXX

Silicon PIN Photodiode

FEATURES
• Low capacitance
• High speed = 30 ns max. 5 V
• Housing electrically isolated
• Wave solderable
• Mounting options

SMA single hole ST single hole SMA PCB ST PCB SMA 4 hole

DESCRIPTION The HFD3022-002/XXX PIN Photodiode is designed for high speed use in fiber optic receivers. It has a large area detector, providing efficient response to 50 - 1000 mm diameter fibers at wavelengths of 750 to 950 nanometers. The HFD3022-002/XXX is comprised of an HFD3022 PIN photodiode which is mounted in a fiber optic connector which aligns the component's optical axis with the axis of the optical fiber. The HFD3022-002/XXXs case is electrically isolated from the anode and cathode terminals to enhance the EMI/RFI shielding which increases the sensitivity and speed. The housing acts as a shield for the PIN photodiode component.

Honeywell reserves the right to make changes in order to improve design and supply the best products possible.

HFD3022-002/XXX

Silicon PIN Photodiode

ELECTRO-OPTICAL CHARACTERISTICS TÙ = unless otherwise stated

PARAMETER

SYMBOL MIN TYP MAX UNITS

TEST CONDITIONS

Peak Response Wavelength

Flux Responsivity [À]
= 850 nm
50 µm core fiber, µA
100 µm core fiber, µA
200 µm core fiber, µA
1000 µm core fiber, µA

Dark Leakage Current

Vß = 5 V
110 250

Iß = 10 µA

Package Capacitance

Vß = 5 V, f = 1 MHz

Rise Time
10-90%
17 30

Vß = 5 V

Vß = 15 V

Vß = 90 V

Field of View

Degrees

Notes

Responsivity is measured with a fiber optic cable centered on the mechanical axis, using an 850 nm HFE4000 LED as the optical source
to the fiber. The fiber length is nominally 3 meters.

ABSOLUTE MAXIMUM RATINGS

Tcase = unless otherwise noted

Storage temperature
-40 to

Operating temperature

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HFD3022-002/ABA Datasheet file may be downloaded here without warranties.

Datasheet ID: HFD3022-002/ABA 636456