98312-03

98312-03 Datasheet

Part # 98310

Part	Datasheet
98312-03	98312-03 (pdf)

Related Parts	Information
98302-93	98302-93
98303-92	98303-92
98313-12	98313-12
98323-81	98323-81
98301-94	98301-94
98311-57	98311-57
098321 94	098321 94
98322-93	98322-93
098750 100	098750 100
28101-20	28101-20
20046-20	20046-20
28100-01	28100-01
20017-14	20017-14
20019-14	20019-14
20035-17	20035-17
20001-17	20001-17
20007-17	20007-17
20001-16	20001-16
20177-23	20177-23
20029K-16	20029K-16
20042-14	20042-14
20115-23	20115-23
20001K-16	20001K-16
20043-14	20043-14
20182-23	20182-23
28104-06	28104-06
20085-16	20085-16
20116-23	20116-23
20036-17	20036-17
20078-20	20078-20
20037-17	20037-17
28104-07	28104-07
28115-16	28115-16
28103-16	28103-16
20085-18	20085-18
20035-16	20035-16
20181-15	20181-15
28105-11	28105-11
28101-16	28101-16
20007K-16	20007K-16
20001-18	20001-18
20016-14	20016-14
20018-14	20018-14
20028-17	20028-17
20029-17	20029-17
20904-00	20904-00
28103-20	28103-20
20171-23	20171-23
20179-23	20179-23
28115-20	28115-20
28114-07	28114-07
28112-16	28112-16
28106-03	28106-03
28103-03	28103-03
28100-03	28100-03
20201-03	20201-03
20194-15	20194-15
20186-16	20186-16
20180-03	20180-03
98434K-56	98434K-56
20111-14	20111-14
20028-20	20028-20
20001-20	20001-20
20017-08	20017-08
20017-15	20017-15
20028-16	20028-16
20182-03	20182-03
20028-18	20028-18
20085-17	20085-17
20034-17	20034-17
20035-09	20035-09
20044-14	20044-14
20045-14	20045-14
20065-16	20065-16

PDF Datasheet Preview
If you have not found what you are looking for or you have further questions, please feel free to call us at 217-753-7797 or fax us at It will help us process your request more efficiently and effectively if you can provide as much detailed information about your requirements/application as possible. Thanks for considering Hobbs meters from Honeywell! MANUFACTURING Honeywell Hobbs’ commitment to the customer in past years and present is what has helped us develop our world-class manufacturing systems. Some of the methods by which we continuously improve our products and processes are as follows: • Six Sigma methodology is a strategy used to accelerate improvements in our processes, products and services, and to reduce manufacturing costs and improve quality. It achieves this by relentlessly focusing on eliminating waste • and reducing defects and variations. Continous Flow Process utilizing “Rabbit Chase” concepts are used in the focused factories in order to achieve the lowest total cost, defect-free product. • Single Minute Exchange of Dies SMED method provides reduced time in molding cell. Statistical Process Control is used for measuring critical • dimensions and controlling manufacturing processes. Poka-Yoke method and computerized test equipment are • utilized to eliminate scrap and rework. Kanban cards are used to pull raw material and piece parts • through the factory. Bar coding and electronic data interchange EDI • are available. QUALITY SYSTEMS It is the goal of Honeywell Hobbs to meet customer value-needs through continuously improved products and processes. That is the basis by which we work to create a partnership with our customers. Evidence of our commitment is proven by a goal of a Shipped Product Quality Level SPQL of 100 ppm. We utilize Advanced Quality Planning and QS9000 based quality systems. 2003 Honeywell International Inc. All Rights Reserved. Sensing and Control email Honeywell P.O. Box 19424 Springfield, IL 62794-9424 USA Catalog 20-1103, GLO Printed in the USA Sensing and Control The Hobbs brand is well known worldwide for the development of quality electro-mechanical products. The invention of the first electrically wound automobile clock in 1938 created what is now known as Honeywell Hobbs. John Weston Hobbs was the inventor that cultivated this electrically-wound vehicle clock into a company that has over the years expanded to include hour meters, pressure and vacuum switches, halogen lamps, transmission shifters, and other custom electro-mechanical products. Honeywells’ broad customer and market base includes industries such as automotive, agricultural, material handling, construction, marine, medical, heavy truck, lawn and garden, recreational, generators, compressors and aviation. Honeywells’ commitment to continuous improvement and total quality management will allow for further expansion of its product lines and customer base while maintaining the highest standards of excellence. Contents: • LCD • D.C. • A.C. • Accessories • Warranty P. 3-5 P. 6-7 P. 8-11 P. 11 P. 11 Other AC and DC Meters Available Round Flush with Retainer Mount Round Slotted 3 screw Contact Hobbs for more information and specifications on above meters. Hour Meter Accessories Mounting brackets. For mounting hour meters in any location when panel installation is not practical. Multiple holes allow positioning for easy reading. Foot of bracket can be bent when necessary. Part Number M-329 2 13/16” x 4” for meter only. Part Number M-558 4” x 5 1/8” when meter and damper are used together. Damper. Protects meter from severe vibration. Use on panel or with Part Number M-558 bracket. Part Number M-3888 3 7/8” dia. for three-screw type DC meters. Panel mounting bracket. Designed to bolt to a flat surface area 2 13/16” x 5 Provides easy-to-read meter position. Part Number M-486 for three-screw type DC meter only. Angle bracket. For two-screw flange AC and DC rectangular meters only, when panel mounting is not practical. Part Number Custom Instrument Panel Clusters Let Hobbs custom design your display panel saving you time and money. We can assemble a panel to your specifications that frees up your engineering resources, reduces parts counts and reduces your vendor base. Warranty and remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Sales and Service

PDF Datasheet Preview

If you have not found what you are looking for or you have further questions, please feel free to call us at 217-753-7797 or fax us at It will help us process your request more efficiently and effectively if you can provide as much detailed information about your requirements/application as possible.

Thanks for considering Hobbs meters from Honeywell!

MANUFACTURING

Honeywell Hobbs’ commitment to the customer in past years and present is what has helped us develop our world-class manufacturing systems. Some of the methods by which we continuously improve our products and processes are as follows:
• Six Sigma methodology is a strategy used to accelerate improvements in our processes, products and services, and to reduce manufacturing costs and improve quality. It achieves this by relentlessly focusing on eliminating waste
• and reducing defects and variations. Continous Flow Process utilizing “Rabbit Chase” concepts are used in the focused factories in order to achieve the lowest total cost, defect-free product.
• Single Minute Exchange of Dies SMED method provides reduced time in molding cell.

Statistical Process Control is used for measuring critical
• dimensions and controlling manufacturing processes.

Poka-Yoke method and computerized test equipment are
• utilized to eliminate scrap and rework.

Kanban cards are used to pull raw material and piece parts
• through the factory.

Bar coding and electronic data interchange EDI
• are available.

QUALITY SYSTEMS

It is the goal of Honeywell Hobbs to meet customer value-needs through continuously improved products and processes. That is the basis by which we work to create a partnership with our customers. Evidence of our commitment is proven by a goal of a Shipped Product Quality Level SPQL of 100 ppm. We utilize Advanced Quality Planning and QS9000 based quality systems.
2003 Honeywell International Inc. All Rights Reserved.

Sensing and Control email Honeywell P.O. Box 19424 Springfield, IL 62794-9424 USA

Catalog 20-1103, GLO Printed in the USA

Sensing and Control

The Hobbs brand is well known worldwide for the development of quality electro-mechanical products. The invention of the first electrically wound automobile clock in 1938 created what is now known as Honeywell Hobbs. John Weston Hobbs was the inventor that cultivated this electrically-wound vehicle clock into a company that has over the years expanded to include hour meters, pressure and vacuum switches, halogen lamps, transmission shifters, and other custom electro-mechanical products. Honeywells’ broad customer and market base includes industries such as automotive, agricultural, material handling, construction, marine, medical, heavy truck, lawn and garden, recreational, generators, compressors and aviation. Honeywells’ commitment to continuous improvement and total quality management will allow for further expansion of its product lines and customer base while maintaining the highest standards of excellence.

Contents:
• LCD
• D.C.
• A.C.
• Accessories
• Warranty

P. 3-5 P. 6-7 P. 8-11 P. 11 P. 11

Other AC and DC Meters Available

Round Flush with Retainer Mount

Round Slotted 3 screw

Contact Hobbs for more information and specifications on above meters.

Hour Meter Accessories

Mounting brackets. For mounting hour meters in any location when panel installation is not practical. Multiple holes allow positioning for easy reading. Foot of bracket can be bent when necessary. Part Number M-329 2 13/16” x 4” for meter only. Part Number M-558 4” x 5 1/8” when meter and damper are used together.

Damper. Protects meter from severe vibration. Use on panel or with Part Number M-558 bracket. Part Number M-3888 3 7/8” dia. for three-screw type DC meters.

Panel mounting bracket. Designed to bolt to a flat surface area 2 13/16” x 5 Provides easy-to-read meter position. Part Number M-486 for three-screw type DC meter only.

Angle bracket. For two-screw flange AC and DC rectangular meters only, when panel mounting is not practical. Part Number

Custom Instrument Panel Clusters

Let Hobbs custom design your display panel saving you time and money. We can assemble a panel to your specifications that frees up your engineering resources, reduces parts counts and reduces your vendor base.

Warranty and remedy

Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose.

While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.

Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

Sales and Service

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 98312-03 Datasheet file may be downloaded here without warranties.

Datasheet ID: 98312-03 636275