ID1A-6S-2.54SFB(81)

ID1A-6S-2.54SFB(81) Datasheet

ID1 Series

Part	Datasheet
ID1A-6S-2.54SFB(81)	ID1A-6S-2.54SFB(81) (pdf)

PDF Datasheet Preview
SIM Card Sockets ID1 Series Miniature and Thin sFeatures Suited for Plug-in SIM Cards of the GSM Standard In Europe, SIM card Subscriber Identity Modules are used for subscriber identification with portable telephone terminals of the GSM system for which standards have been unified. The ID1A Series of sockets are suited for use with GSM standard plug-in SIM cards. Miniature and Thin These sockets are miniature and thin with a height of mm, length of mm, and width of mm. The weight has been reduced by 30% compared with our existing products. See Photograph Suited to Automatic Mounting The board mounting method is of the surface mount type.In addition to the standard tray packaging specification, an embossed tape specification suited to automatic mounting is also available. Prevention of Incorrect Insertion to the Board A board-positioning boss prevents incorrect insertion to the board by means of boss position and boss diameter. Slide Lock System An original lock structure securely holds the SIM card and easy opening and closing of the card holder is another feature. See Photograph Slide Lock System Photograph 1 Photograph 2 Structure and Names of the Parts sApplications Portable terminals and equipment that use GSM Standard plug-in SIM cards. Photograph 3 sProduct Specifications Rating Current rating 1 A Voltage rating 100 V AC Operating temperature -30ç to +80ç NOTE 1 Operating humidity range 40 to 80% Storage temperature -10ç to +60ç NOTE 2 Storage humidity 40 to 70% NOTE 2 Item Insulation resistance Specification min. 100 V DC Conditions Withstanding voltage No flashover or insulation breakdown. Contact resistance 40 max. Vibration No electrical discontinuity of 10 µs or more Contact resistance 60 max. Humidity Steady state Insulation resistance 100 min. Temperature cycle Contact resistance 60 max. Insulation resistance 100 min. Durability Insertion/withdrawal Contact resistance of 60 max. qOrdering Information ID1A - 6 S - SF 21 1 Series Name ID1A 2 Number of contacts 6 3 Contact type S Socket 4 Contact pitch mm 5 Terminal type SF SMT type 6 Packaging type Blank Tray packaging 21 Embossed tape packaging Remarks UL94V-0 UL94V-0 UL94V-0 sSockets With the card holder closed With the card holder open 1 When locking, slide the protruding portion of the slider after the card holder has been closed. 2 The co-planarity at the SMT lead tip portion is maximum. 3 indicates a center line. CL No. Number of Contacts Packaging type ID1A-6S-2.54SF 645-0003-9 Tray ID1A-6S-2.54SF 21 645-0003-9-21 Embossed tape NOTE 1 NOTE 1 Embossed tape packaged items are sold by the reel with 500 pieces per reel. Number of Pieces 500 pieces per reel BPCB mounting pattern BTemperature Profile Max. Applicable Conditions Reflow system IR reflow Solder type Cream type 63 Sn/37 Pb Flux component 9 wt% Test board Glass epoxy 85 x 60 x 1 mm Metal mask thickness mm Conditions may change and are dependent on type and thicness of solder. sEmbossed Carrier Tape Dimensions Unreeling direction qReel Dimensions sMethod of Using the Sockets Part Structure and Names Please see Photograph 3 on C39 page. Opening the Holder Cover Press the slider and at the same time move it in the direction marked "OPEN". This action will release the lock and free the card holder. Closing the Holder Cover Remove the SIM card as shown so that it comes out from the card holder. Insert the SIM card to the card holder. Close the card holder, press the slider, and at the same time move it in the direction marked "LOCK" on the card holder. A click sound will indicate that the lock has been engaged. BPrecautions for Use

PDF Datasheet Preview

SIM Card Sockets

ID1 Series

Miniature and Thin
sFeatures

Suited for Plug-in SIM Cards of the GSM Standard

In Europe, SIM card Subscriber Identity Modules are used for subscriber identification with portable telephone terminals of the GSM system for which standards have been unified. The ID1A Series of sockets are suited for use with GSM standard plug-in SIM cards.

Miniature and Thin

These sockets are miniature and thin with a height of mm, length of mm, and width of mm. The weight has been reduced by 30% compared with our existing products. See Photograph

Suited to Automatic Mounting

The board mounting method is of the surface mount type.In addition to the standard tray packaging specification, an embossed tape specification suited to automatic mounting is also available.

Prevention of Incorrect Insertion to the Board

A board-positioning boss prevents incorrect insertion to the board by means of boss position and boss diameter.

Slide Lock System

An original lock structure securely holds the SIM card and easy opening and closing of the card holder is another feature. See Photograph

Slide Lock System

Photograph 1

Photograph 2

Structure and Names of the Parts
sApplications

Portable terminals and equipment that use GSM Standard plug-in SIM cards.

Photograph 3
sProduct Specifications

Rating

Current rating 1 A Voltage rating 100 V AC

Operating temperature -30ç to +80ç NOTE 1

Operating humidity range 40 to 80%

Storage temperature -10ç to +60ç NOTE 2

Storage humidity 40 to 70% NOTE 2

Item Insulation resistance

Specification min.
100 V DC

Conditions

Withstanding voltage No flashover or insulation breakdown.

Contact resistance
40 max.

Vibration

No electrical discontinuity of 10 µs or more

Contact resistance 60 max. Humidity Steady state Insulation resistance 100 min.

Temperature cycle

Contact resistance 60 max. Insulation resistance 100 min.

Durability Insertion/withdrawal Contact resistance of 60 max.
qOrdering Information

ID1A - 6 S - SF 21
1 Series Name ID1A
2 Number of contacts 6
3 Contact type S Socket
4 Contact pitch mm
5 Terminal type SF SMT type
6 Packaging type Blank Tray packaging 21 Embossed tape packaging

Remarks UL94V-0

UL94V-0 UL94V-0
sSockets

With the card holder closed With the card holder open
1 When locking, slide the protruding portion of the slider after the card holder has been closed. 2 The co-planarity at the SMT lead tip portion is maximum. 3 indicates a center line.

CL No.

Number of Contacts

Packaging type

ID1A-6S-2.54SF
645-0003-9

Tray

ID1A-6S-2.54SF 21 645-0003-9-21

Embossed tape NOTE 1

NOTE 1 Embossed tape packaged items are sold by the reel with 500 pieces per reel.

Number of Pieces
500 pieces per reel

BPCB mounting pattern

BTemperature Profile

Max.

Applicable Conditions Reflow system IR reflow Solder type Cream type 63 Sn/37 Pb Flux component 9 wt% Test board Glass epoxy 85 x 60 x 1 mm Metal mask thickness mm Conditions may change and are dependent on type and thicness of solder.
sEmbossed Carrier Tape Dimensions

Unreeling direction
qReel Dimensions
sMethod of Using the Sockets

Part Structure and Names

Please see Photograph 3 on C39 page.

Opening the Holder Cover

Press the slider and at the same time move it in the direction marked "OPEN". This action will release the lock and free the card holder.

Closing the Holder Cover

Remove the SIM card as shown so that it comes out from the card holder.

Insert the SIM card to the card holder.

Close the card holder, press the slider, and at the same time move it in the direction marked "LOCK" on the card holder. A click sound will indicate that the lock has been engaged.

BPrecautions for Use

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ID1A-6S-2.54SFB(81) Datasheet file may be downloaded here without warranties.

Datasheet ID: ID1A-6S-2.54SFB(81) 636189