AT-1310-H.J(40)
AT-1310-H.J(40) Datasheet
AT-1200 and AT-1300 Series
| Part | Datasheet |
|---|---|
AT-1310-H.J(40) |
AT-1310-H.J(40) (pdf) |
| Related Parts | Information |
|---|---|
AT-1210-HJ(40) |
AT-1210-HJ(40) |
AT-1320-H.J(40) |
AT-1320-H.J(40) |
AT-1220-HJ(40) |
AT-1220-HJ(40) |
| PDF Datasheet Preview |
|---|
| The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. High Power Fixed Attenuators Heat sink Mounting Type AT-1200 and AT-1300 Series AT-1210-H • J 40 AT-1320-H • J 40 sFeatures 1.Small Size and Economical Beryllia is used for the material of the resistance element to enable the attenuation to be of small size and low cost. 2.High Power Capacity Mounting these attenuators to a heat sink permits the AT-1200 Series to be used at up to 30 W and the AT1300 Series to be used at up to 50 W. 3.High Reliability These attenuators show stable characteristics for environments of varying temperature, humidity, and gases. sProduct Specifications Ratings Frequency range Note Characteristic impedance Maximum Input Power Note DC to GHz 50 ohms 30 to 50 W Operating temperature range Operating relative humidity Note The frequency range and the maximum input power will differ depending on the products. to +65ç 95% Max. Item 1.Vibration 2.Shock Standard No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation 3.Temperature cycle No damage, cracks, or parts dislocation qThe test method conforms to MIL-STD-202. Conditions Frequency of 10 to 2000 Hz, overall amplitude of mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature -55ç +15ç to +35ç +85ç +15ç to +35ç Time 30 15 max. 30 15 max. Minutes 5 cycles sMaterials Part Connector Body Body Female contacts Insulation Attenuation element Material Stainless steel Aluminum Beryllium copper PTFE Metal film Finish Passivated Conductive white alumite Gold plating ------------------- sOrdering Information AT - 12 10 -H • J 40 1 AT Indicates a fixed attenuator 2 Indicates the Series Name Maximum Usable Power 12 HRM type plug - jack 30W 13 N type plug - jack 50W 3 Attenuation 10 10dB 20 20dB 4 Coupling Portion H•J SMA type jack - jack N•H N type jack - SMA type jack 5 40 RoHS Compliant 04/208091 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHAS HMiroosuenwteibnsigte TRoyHpSese arch at or contact your Hirose sales representative. sSpecifications Frequency Part Number Range AT-1210-H • J DC~1 Attenuation V.S.W.R. Impedance ohms Power W Heat Sink Temperature at Maximum Load çMax Connectors Weight g 30W CW HRM-J • J AT-1220-H • J DC~1 30W CW AT-1310-H • J DC~2 50W CW AT-1320-H • J DC~2 50W CW AT-1300 Series has input and output directivity. Beryllia is used in this product. Please follow associated laws when disposing. HRM-J • J HRM-J • J 54 YES HRM-J • J sExternal Dimensions sTypical Data AT-1220 40 AT-1200-H • J 40 AT-1300-H • J 40 AT-1320 40 V.S.W.R. V.S.W.R. |
| More datasheets: IRGR4607DTRRPBF | LE58QL061BVCT | LE58QL063HVC | LE58QL063HVCT | LE58QL061BVC | BFR750L3RHE6327XTSA1 | FCRAM-ONE-XM-N1 | FCRAM-ONE-E2-N1 | AT-1210-HJ(40) | AT-1320-H.J(40) |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT-1310-H.J(40) Datasheet file may be downloaded here without warranties.