AT-1020(BOX)(40)
AT-1020(BOX)(40) Datasheet
AT-1000 and AT-1100 Series
| Part | Datasheet |
|---|---|
AT-1020(BOX)(40) |
AT-1020(BOX)(40) (pdf) |
| Related Parts | Information |
|---|---|
AT-1106(40) |
AT-1106(40) |
AT-1020(40) |
AT-1020(40) |
AT-1002(40) |
AT-1002(40) |
AT-1120(40) |
AT-1120(40) |
AT-1010(40) |
AT-1010(40) |
AT-1001(40) |
AT-1001(40) |
AT-1103(40) |
AT-1103(40) |
AT-1003(40) |
AT-1003(40) |
AT-1006(40) |
AT-1006(40) |
AT-1110(40) |
AT-1110(40) |
| PDF Datasheet Preview |
|---|
| The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at or contact your Hirose sales representative. High Power Fixed Attenuators Radiator built-in AT-1000 and AT-1100 Series AT-1003 40 AT-1106 40 sFeatures 1.Small Size and Economical Beryllia is used for the material of the resistance element to enable the termination to be of small size and low cost. 2.Connectors Used In the coupling portion, the AT-1000 Series has an SMA type plug-jack and the AT-1100 Series has an N type plug-jack. 3.High Reliability These attenuators show stable characteristics for environments of varying temperature, humidity, and gases. sProduct Specifications Ratings Frequency range Characteristic impedance Maximum Input Power DC to GHz 50 ohms 10W Item 1.Vibration 2.Shock Standard No electrical discontinuity of 1 µs or more No damage, cracks, or parts dislocation 3.Temperature cycle No damage, cracks, or parts dislocation qThe test method conforms to MIL-STD-202. Operating temperature range Operating relative humidity to +65ç 95% Max. Conditions Frequency of 10 to 2000 Hz, overall amplitude of mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature -55ç +15ç to +35ç +85ç +15ç to +35ç Time 30 15 max. 30 15 max. Minutes 5 cycles sMaterials sOrdering Information Part Material Finish Connector Body Note Stainless steel Passivated Insulator PTFE ---------- Male contacts Brass Gold plating Female contacts Beryllium copper Gold plating Outer conductor Aluminum Nickel plating Coupling Note Stainless steel Passivated Radiator Aluminum Black alumite Attenuation element Metal film ---------- Note Nickel plated brass is used for the body in the AT-1100 Series. AT - 10 01 40 1 AT Indicates a fixed attenuator 3 Attenuation 01 1dB 2 Indicates the Series Name Coupling Portion 03 3dB 10 SMA type plug - jack 10 10dB 11 N type plug - jack 20 20dB 4 40 RoHS compliant CAUTION Beryllia is used in this product. Please follow associated laws when disposing. 04/207095 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHAS RoHS search at or contact your Hirose sales representative. sSpecifications |
| More datasheets: MIC2597-2BTS | SLE 4442 C | SLE 4432 C | SLE 4442 M3.2 | SLE 4432 M3.2 | HUFA76443P3 | HUFA76443S3ST | HUFA76443S3S | DCMME21WA4S | DDMG43X2PJK87 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT-1020(BOX)(40) Datasheet file may be downloaded here without warranties.