JW150B1

JW150B1 Datasheet

JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W

Part	Datasheet
JW150B1	JW150B1 (pdf)

Related Parts	Information
JW075B1	JW075B1
JW100B1	JW100B1
JW050B1	JW050B1
JW050B	JW050B

PDF Datasheet Preview
Data Sheet April 2008 JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W The JW050B, JW075B, JW100B, and JW150B Power Modules use advanced, surface-mount technology and deliver highquality, efficient, and compact dc-dc conversion. n Distributed power architectures n Workstations n Computer equipment n Communications equipment Options n Heat sinks available for extended operation n Choice of remote on/off logic configuration n Small size mm x mm x mm in. x in. x in. n High power density n High efficiency 88% typical n Low output noise n Constant frequency n Industry-standard pinout n Metal baseplate n 2:1 input voltage range n Overtemperature protection 100 W and 150 W only n Overcurrent and overvoltage protection n Remote sense n Remote on/off n Adjustable output voltage 60% to 110% of VO, nom n Case ground pin n ISO9001 Certified manufacturing facilities n UL* 1950 Recognized, CSA† C22.2 No. 950-95 Certified, and VDE 0805 EN60950, IEC950 Licensed n CE mark meets 73/23/EEC and 93/68/EEC * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Assn. This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products. The JW050B, JW075B, JW100B, and JW150B Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide a precisely regulated dc output. The outputs are fully isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings from 50 W to 150 W at a typical full-load efficiency of The sealed modules offer a metal baseplate for excellent thermal performance. Threaded-through holes are provided to allow easy mounting or addition of a heat sink for high-temperature applications. The standard feature set includes remote sensing, output trim, and remote on/off for convenient flexibility in distributed power applications. JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W Data Sheet April 2008 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Unit Input Voltage: Continuous: JW050B, JW075B JW100B, JW150B Transient 100 ms JW100B, JW150B only VI, trans I/O Isolation Voltage for 1 minute 1500 The temperature at this location should not exceed 100 °C. The output power of the module should not exceed the rated power for the module as listed in the Ordering Information table. Although the maximum case temperature of the power modules is 100 °C, you can limit this temperature to a lower value for extremely high reliability. For additional information on these modules, refer to the Thermal Management JC-, JFC-, JW-, and JFWSeries 50 W to 150 W Board-Mounted Power Modules Technical Note TN97-008EPS . Increasing over the module enhances the heat transfer via convection. Figure 27 shows the maximum power that can be dissipated by the module without exceeding the maximum case temperature versus local ambient temperature TA for natural convection through 4 m/s 800 ft./min. . Note that the natural convection condition was measured at m/s to m/s 10 ft./min. to 20 ft./min. however, systems in which these power modules may be used typically generate natural convection rates of m/s 60 ft./min. due to other heat dissipating components in the system. The use of Figure 27 is shown in the following example. Example What is the minimum necessary for a JW100B operating at VI = 54 V, an output current of A, and a maximum ambient temperature of 40 °C? Solution Given VI = 54 V IO = A TA = 40 °C Determine PD Use Figure PD = 15 W Determine v Use Figure v = m/s 325 ft./min. POWER DISSIPATION, PD W m/s 800 ft./min. m/s 700 ft./min. m/s 600 ft./min. m/s 500 ft./min. m/s 400 ft./min. m/s 300 ft./min. m/s 200 ft./min. m/s 100 ft./min. 5 m/s NAT. CONV. 20 ft./min. 0 10 20 30 40 50 60 70 80 90 100 LOCAL AMBIENT TEMPERATURE, TA °C 8-1150 C .a Figure Forced Convection Power Derating with No Heat Sink Either Orientation Lineage Power JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W Data Sheet April 2008 Thermal Considerations continued Heat Transfer Without Heat Sinks continued POWER DISSIPATION, PD W VI = 75 V VI = 54 V VI = 36 V OUTPUT CURRENT, IO A Figure JW050B Power Dissipation vs. Output Current 8-1186 C POWER DISSIPATION, PD W VI = 75 V VI = 54 V VI = 36 V 8 OUTPUT CURRENT, IO A Ordering Information Table Device Codes Input Voltage 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V Output Voltage V Output Power 50 W 75 W 100 W 150 W 50 W 75 W 100 W 150 W Remote On/Off Logic Negative Positive Device Code JW050B1 JW075B1 JW100B1 JW150B1 JW050B JW075B JW100B JW150B 8-1945 C .a Comcode 107071573 107071599 107361420 107035677 107309759 107250417 107361412 107018954 Lineage Power Data Sheet April 2008 JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W Ordering Information continued Table Device Accessories Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws Dimensions are in millimeters and inches . Comcode 407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. D000-c.cvs Figure Longitudinal Heat Sink 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. Figure Transverse Heat Sink D000-d.cvs Lineage Power JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W Data Sheet April 2008 A sia-Pacific H eadq uarters Tel +65 6416 4283 W o rld W ide Head qu arters L in eag e Po wer Co rp oratio n 3000 Sk yline Driv e, Mes quite, T X 75149, U SA + 1-800-526-7819 Outside U .S.A. +1-972-284-2626 eagep ower.co m e-mail tech sup po lin eagepo wer.co m Eu ro p e, M idd le-East and A frica H eadq uarters Tel +49 89 6089 286 Ind ia He adq uarters Tel +91 80 28411633 Lineage P ower r eserves the right to mak e c hanges to the produc t s or information contained her ein without notice. No liability is ass umed as a r es ult of their use or applic ation. No rights under any patent accompany the sale of any s uc h product s or information. 2008 Lineage Power Corpor ation, Mesquite, T ex as A ll International Rights Res er ved. April 2008 DS99-286EPS ReplacesDS99-285EPS

PDF Datasheet Preview

Data Sheet April 2008

JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W

The JW050B, JW075B, JW100B, and JW150B Power Modules use advanced, surface-mount technology and deliver highquality, efficient, and compact dc-dc conversion.
n Distributed power architectures n Workstations n Computer equipment n Communications equipment

Options
n Heat sinks available for extended operation n Choice of remote on/off logic configuration
n Small size mm x mm x mm in. x in. x in.
n High power density
n High efficiency 88% typical
n Low output noise
n Constant frequency
n Industry-standard pinout
n Metal baseplate
n 2:1 input voltage range
n Overtemperature protection 100 W and 150 W only
n Overcurrent and overvoltage protection
n Remote sense
n Remote on/off
n Adjustable output voltage 60% to 110% of VO, nom
n Case ground pin
n ISO9001 Certified manufacturing facilities n UL* 1950 Recognized, CSA† C22.2 No. 950-95

Certified, and VDE 0805 EN60950, IEC950 Licensed
n CE mark meets 73/23/EEC and 93/68/EEC
* UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Assn. This product is intended for integration into end-use equipment.

All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products.

The JW050B, JW075B, JW100B, and JW150B Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide a precisely regulated dc output. The outputs are fully isolated from the inputs, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings from 50 W to 150 W at a typical full-load efficiency of

The sealed modules offer a metal baseplate for excellent thermal performance. Threaded-through holes are provided to allow easy mounting or addition of a heat sink for high-temperature applications. The standard feature set includes remote sensing, output trim, and remote on/off for convenient flexibility in distributed power applications.

JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W

Data Sheet April 2008

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter

Unit

Input Voltage:

Continuous:

JW050B, JW075B

JW100B, JW150B

Transient 100 ms JW100B, JW150B only

VI, trans

I/O Isolation Voltage for 1 minute
1500
The temperature at this location should not exceed 100 °C. The output power of the module should not exceed the rated power for the module as listed in the Ordering Information table.

Although the maximum case temperature of the power modules is 100 °C, you can limit this temperature to a lower value for extremely high reliability.

For additional information on these modules, refer to the Thermal Management JC-, JFC-, JW-, and JFWSeries 50 W to 150 W Board-Mounted Power Modules Technical Note TN97-008EPS .

Increasing over the module enhances the heat transfer via convection. Figure 27 shows the maximum power that can be dissipated by the module without exceeding the maximum case temperature versus local ambient temperature TA for natural convection through 4 m/s 800 ft./min. .

Note that the natural convection condition was measured at m/s to m/s 10 ft./min. to 20 ft./min. however, systems in which these power modules may be used typically generate natural convection rates of m/s 60 ft./min. due to other heat dissipating components in the system. The use of Figure 27 is shown in the following example.

Example

What is the minimum necessary for a JW100B operating at VI = 54 V, an output current of A, and a maximum ambient temperature of 40 °C?

Solution

Given VI = 54 V IO = A TA = 40 °C

Determine PD Use Figure

PD = 15 W

Determine v Use Figure
v = m/s 325 ft./min.

POWER DISSIPATION, PD W
m/s 800 ft./min.
m/s 700 ft./min. m/s 600 ft./min.
m/s 500 ft./min.
m/s 400 ft./min.
m/s 300 ft./min.
m/s 200 ft./min. m/s 100 ft./min.
5 m/s NAT. CONV. 20 ft./min.
0 10 20 30 40 50 60 70 80 90 100

LOCAL AMBIENT TEMPERATURE, TA °C
8-1150 C .a

Figure Forced Convection Power Derating with No Heat Sink Either Orientation

Lineage Power

JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W

Data Sheet April 2008

Thermal Considerations continued Heat Transfer Without Heat Sinks continued

POWER DISSIPATION, PD W

VI = 75 V

VI = 54 V

VI = 36 V

OUTPUT CURRENT, IO A

Figure JW050B Power Dissipation vs. Output Current
8-1186 C

POWER DISSIPATION, PD W

VI = 75 V

VI = 54 V

VI = 36 V 8

OUTPUT CURRENT, IO A
Ordering Information

Table Device Codes

Input Voltage
48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V

Output Voltage V

Output Power 50 W 75 W 100 W 150 W 50 W 75 W 100 W 150 W

Remote On/Off Logic

Negative Positive

Device Code JW050B1 JW075B1 JW100B1 JW150B1 JW050B JW075B JW100B JW150B
8-1945 C .a

Comcode 107071573 107071599 107361420 107035677 107309759 107250417 107361412 107018954

Lineage Power

Data Sheet April 2008

JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W
Ordering Information continued

Table Device Accessories

Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws

Dimensions are in millimeters and inches .

Comcode
407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755
1/4 IN. 1/2 IN.
1 IN.
1/2 IN.

D000-c.cvs

Figure Longitudinal Heat Sink
1/4 IN. 1/2 IN.
1 IN.
1/2 IN.

Figure Transverse Heat Sink

D000-d.cvs

Lineage Power

JW050B, JW075B, JW100B, JW150B Power Modules dc-dc Converters 36 to 75 Vdc Input, 12 Vdc Output 50 W to 150 W

Data Sheet April 2008

A sia-Pacific H eadq uarters Tel +65 6416 4283

W o rld W ide Head qu arters L in eag e Po wer Co rp oratio n 3000 Sk yline Driv e, Mes quite, T X 75149, U SA
+ 1-800-526-7819 Outside U .S.A. +1-972-284-2626
eagep ower.co m e-mail tech sup po lin eagepo wer.co m

Eu ro p e, M idd le-East and A frica H eadq uarters Tel +49 89 6089 286

Ind ia He adq uarters Tel +91 80 28411633

Lineage P ower r eserves the right to mak e c hanges to the produc t s or information contained her ein without notice. No liability is ass umed as a r es ult of their use or applic ation. No rights under any patent accompany the sale of any s uc h product s or information.
2008 Lineage Power Corpor ation, Mesquite, T ex as A ll International Rights Res er ved.

April 2008 DS99-286EPS ReplacesDS99-285EPS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JW150B1 Datasheet file may be downloaded here without warranties.

Datasheet ID: JW150B1 645691