JFW150F1

JFW150F1 Datasheet

JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W

Part	Datasheet
JFW150F1	JFW150F1 (pdf)

PDF Datasheet Preview
Data Sheet April 2008 JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W The JFW-Series Power Modules use advanced, surfacemount technology and deliver high-quality, efficient, compact dc-dc conversion. n Redundant and/or distributed power architectures n Workstations n Computer equipment n Communications equipment Options n Heat sinks available for extended operation n Choice of primary remote on/off logic configuration n Delayed current-limit shutdown The JFW-Series Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide a precisely regulated dc output. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings from 33 W to 99 W at typical full-load efficiencies of The sealed modules have metal baseplates for excellent thermal performance. Threaded-through holes are provided for easy mounting or adding a heat sink for high-temperature applications. Listed above are the enhanced features for convenience and flexibility in redundant and/or distributed power applications. n Small size mm x mm x mm in. x in. x in. n High power density n High efficiency 80% typical n Low output noise n Constant frequency n Metal baseplate n 2:1 input voltage range n Anti-rollback circuit n Overcurrent protection n Current-limit set-point adjustment n Primary and secondary remote on/off n Remote sense n Adjustable output voltage 60% to 110% of VO, nom n Output overvoltage protection n Overvoltage set-point adjustment n Synchronization n Forced load sharing parallelable n Parallelable with FW300F1 n Output current monitor n Overtemperature protection n Power good signal n Thermal warning signal n Case ground pin n ISO 9001 Certified manufacturing facilities n UL†1950 Recognized, C22.2 No. 950-95 Certified, and VDE 0805 EN60950, IEC950 Licensed n CE mark meets 73/23/EEC and 93/68/EEC directives§ ISO is a registered trademark of the International Organization of Standardization. † UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Assn. § This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products. JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W Data Sheet April 2008 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Unit Input Voltage I/O Isolation Voltage for 1 minute 1500 Operating Case Temperature See Thermal Considerations section. Storage Temperature Tstg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Table Input Specifications Parameter Unit Operating Input Voltage Maximum Input Current VI = 0 V to 75 V IO = IO, max see Figures JFW050F II, max JFW075F II, max JFW100F II, max JFW150F The temperature at this location should not exceed 100 °C. The output power of the module should not exceed the rated power for the module as listed in the Ordering Information table. Although the maximum case temperature of the power modules is 100 °C, you can limit this temperature to a lower value for extremely high reliability. For additional information regarding this module, refer to the Thermal Management JC-, JFC-, JW-, and JFWSeries 50 W to 150 W Board-Mounted Power Modules Technical Note TN97-008EPS . POWER DISSIPATION, PD W m/ s800 ft./min m/ s700 ft./min m/ s600 ft./min m /5s00 ft./min m /4s00 ft./min m/ s300 ft./min m/ s200 ft./min m/ s100 ft./min m/s NAT. CONV. 20 ft./min. 0 10 20 30 40 50 60 70 80 90 100 LOCAL AMBIENT TEMPERATURE, TA 8-1150 C .a Figure Forced Convection Power Derating with No Heat Sink Either Orientation Heat Transfer Without Heat Sinks Increasing airflow over the module enhances the heat transfer via convection. Figure 28 shows the maximum power that can be dissipated by the module without exceeding the maximum case temperature versus local ambient temperature TA for natural convection through 4 m/s 800 ft./min. . Lineage Power Data Sheet April 2008 JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W Thermal Considerations continued Heat Transfer Without Heat Sinks continued POWER DISSIPATION, PD W 7 VI = 75 V 6 VI = 54 V VI = 36 V 2 0 1 2 3 4 5 6 7 8 9 10 OUTPUT CURRENT, IO A 8-1459 C Figure JFW050F Power Dissipation vs. Output Current at 25 °C POWER DISSIPATION, PD W 17 16 VI = 36 V VI = 54 V VI = 3765 V 0 2 4 6 8 10 12 14 16 18 20 OUTPUT CURRENT, IO A 8-1461 C Figure JFW100F Power Dissipation vs. Output Current at 25 °C POWER DISSIPATION, PD W Ordering Information Table Device Codes Input Voltage 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V Output Voltage Output Power 33 W 50 W 66 W 99 W 33 W 50 W 66 W 99 W Remote On/Off Logic Negative Positive Device Code JFW050F1 JFW075F1 JFW100F1 JFW150F1 JFW050F JFW075F JFW100F JFW150F Comcode 108161837 108299017 108298993 108161761 Optional features can be ordered using the suffixes shown in Table The suffixes follow the last letter of the device code and are placed in descending order. For example, the device codes for a JFW150F module with the following options are shown below: Positive logic Negative logic Negative logic and delayed current-limit shutdown JFW150F JFW150F1 JFW150F31 Table Device Options Option Delayed current-limit shutdown Negative remote on/off logic Positive remote on/off logic Suffix 3 1 Lineage Power Data Sheet April 2008 JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W Ordering Information continued Table Device Accessories Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws Dimensions are in millimeters and inches . Comcode 407243989 407243997 407244706 407244714 407244722 407244730 407244748 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. 8-2832 C Figure Longitudinal Heat Sink 1/4 IN. 1/2 IN. 1 IN. 1/2 IN. Figure Transverse Heat Sink 8-2833 C Lineage Power JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W Data Sheet April 2008 A sia-Pacific Head qu art ers T el +65 6 41 6 4283 World W ide Headq u arters Lin eag e Po wer Co rp oratio n 30 00 Sk yline D rive, Mesquite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup lin ea gep ower.co m Eu ro pe, M id dle-East an d Afric a He ad qu arters Tel +49 8 9 6089 286 Ind ia Head qu arters Tel +91 8 0 28411633 Lineage Power reserves the right to make changes to the produc t s or information contained herein without notice. No liability is ass umed as a res ult of their use or applic ation. No rights under any patent acc ompany the sale of any s uc h pr oduct s or information. 2008 Lineage Power Corpor ation, Mesquite, Texas All International Rights Res er ved. April 2008 DS98-384EPS Replaces DS98-383EPS

PDF Datasheet Preview

Data Sheet April 2008

JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W

The JFW-Series Power Modules use advanced, surfacemount technology and deliver high-quality, efficient, compact dc-dc conversion.
n Redundant and/or distributed power architectures n Workstations n Computer equipment n Communications equipment

Options
n Heat sinks available for extended operation n Choice of primary remote on/off logic configuration n Delayed current-limit shutdown

The JFW-Series Power Modules are dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide a precisely regulated dc output. The output is fully isolated from the input, allowing versatile polarity configurations and grounding connections. The modules have maximum power ratings from 33 W to 99 W at typical full-load efficiencies of

The sealed modules have metal baseplates for excellent thermal performance. Threaded-through holes are provided for easy mounting or adding a heat sink for high-temperature applications. Listed above are the enhanced features for convenience and flexibility in redundant and/or distributed power applications.
n Small size mm x mm x mm in. x in. x in.
n High power density n High efficiency 80% typical n Low output noise n Constant frequency n Metal baseplate n 2:1 input voltage range n Anti-rollback circuit n Overcurrent protection n Current-limit set-point adjustment n Primary and secondary remote on/off n Remote sense n Adjustable output voltage 60% to 110% of VO, nom n Output overvoltage protection n Overvoltage set-point adjustment n Synchronization n Forced load sharing parallelable n Parallelable with FW300F1 n Output current monitor n Overtemperature protection n Power good signal n Thermal warning signal n Case ground pin n ISO *9001 Certified manufacturing facilities n UL†1950 Recognized, C22.2 No. 950-95

Certified, and VDE 0805 EN60950, IEC950 Licensed n CE mark meets 73/23/EEC and 93/68/EEC directives§
* ISO is a registered trademark of the International Organization of Standardization.
† UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Assn. § This product is intended for integration into end-use equipment.

All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products.

JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W

Data Sheet April 2008

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter

Unit

Input Voltage

I/O Isolation Voltage for 1 minute
1500

Operating Case Temperature See Thermal Considerations section.

Storage Temperature

Tstg

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Table Input Specifications

Parameter

Unit

Operating Input Voltage

Maximum Input Current

VI = 0 V to 75 V IO = IO, max see Figures

JFW050F

II, max

JFW075F

II, max

JFW100F

II, max

JFW150F
The temperature at this location should not exceed 100 °C. The output power of the module should not exceed the rated power for the module as listed in the Ordering Information table.

Although the maximum case temperature of the power modules is 100 °C, you can limit this temperature to a lower value for extremely high reliability.

For additional information regarding this module, refer to the Thermal Management JC-, JFC-, JW-, and JFWSeries 50 W to 150 W Board-Mounted Power Modules Technical Note TN97-008EPS .

POWER DISSIPATION, PD W
m/ s800 ft./min
m/ s700 ft./min
m/ s600 ft./min
m /5s00 ft./min
m /4s00 ft./min
m/ s300 ft./min
m/ s200 ft./min
m/ s100 ft./min
m/s NAT. CONV.
20 ft./min.
0 10 20 30 40 50 60 70 80 90 100

LOCAL AMBIENT TEMPERATURE, TA
8-1150 C .a

Figure Forced Convection Power Derating with No Heat Sink Either Orientation

Heat Transfer Without Heat Sinks

Increasing airflow over the module enhances the heat transfer via convection. Figure 28 shows the maximum power that can be dissipated by the module without exceeding the maximum case temperature versus local ambient temperature TA for natural convection through 4 m/s 800 ft./min. .

Lineage Power

Data Sheet April 2008

JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W

Thermal Considerations continued Heat Transfer Without Heat Sinks continued

POWER DISSIPATION, PD W
7 VI = 75 V
6 VI = 54 V

VI = 36 V
2 0 1 2 3 4 5 6 7 8 9 10

OUTPUT CURRENT, IO A
8-1459 C

Figure JFW050F Power Dissipation vs. Output Current at 25 °C

POWER DISSIPATION, PD W
17 16

VI = 36 V

VI = 54 V VI = 3765 V
0 2 4 6 8 10 12 14 16 18 20

OUTPUT CURRENT, IO A
8-1461 C

Figure JFW100F Power Dissipation vs. Output Current at 25 °C

POWER DISSIPATION, PD W
Ordering Information

Table Device Codes

Input Voltage
48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V

Output Voltage

Output Power 33 W 50 W 66 W 99 W 33 W 50 W 66 W 99 W

Remote On/Off Logic

Negative Positive

Device Code JFW050F1 JFW075F1 JFW100F1 JFW150F1 JFW050F JFW075F JFW100F JFW150F

Comcode
108161837 108299017 108298993 108161761

Optional features can be ordered using the suffixes shown in Table The suffixes follow the last letter of the device code and are placed in descending order. For example, the device codes for a JFW150F module with the following options are shown below:

Positive logic Negative logic Negative logic and delayed current-limit shutdown

JFW150F JFW150F1 JFW150F31

Table Device Options

Option Delayed current-limit shutdown Negative remote on/off logic Positive remote on/off logic

Suffix 3 1

Lineage Power

Data Sheet April 2008

JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W
Ordering Information continued

Table Device Accessories Accessory
1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws
1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws

Dimensions are in millimeters and inches .

Comcode
407243989 407243997 407244706 407244714 407244722 407244730 407244748
1/4 IN. 1/2 IN.
1 IN.
1/2 IN.
8-2832 C

Figure Longitudinal Heat Sink
1/4 IN. 1/2 IN.
1 IN.
1/2 IN.

Figure Transverse Heat Sink
8-2833 C

Lineage Power

JFW050F, JFW075F, JFW100F, JFW150F Power Modules dc-dc Converters 36 to 75 Vdc Input Vdc Output 33 W to 99 W

Data Sheet April 2008

A sia-Pacific Head qu art ers T el +65 6 41 6 4283

World W ide Headq u arters Lin eag e Po wer Co rp oratio n 30 00 Sk yline D rive, Mesquite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup lin ea gep ower.co m

Eu ro pe, M id dle-East an d Afric a He ad qu arters Tel +49 8 9 6089 286

Ind ia Head qu arters Tel +91 8 0 28411633

Lineage Power reserves the right to make changes to the produc t s or information contained herein without notice. No liability is ass umed as a res ult of their use or applic ation. No rights under any patent acc ompany the sale of any s uc h pr oduct s or information.
2008 Lineage Power Corpor ation, Mesquite, Texas All International Rights Res er ved.

April 2008 DS98-384EPS Replaces DS98-383EPS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JFW150F1 Datasheet file may be downloaded here without warranties.

Datasheet ID: JFW150F1 645681