HW050FG

HW050FG Datasheet

HW050AF and HW050FG Power Modules dc-dc Converters 36 to 75 Vdc Input, and Vdc or and Vdc Dual Output 50 W

Part	Datasheet
HW050FG	HW050FG (pdf)

Related Parts	Information
HW050AF	HW050AF

PDF Datasheet Preview
Data Sheet April 2008 HW050AF and HW050FG Power Modules dc-dc Converters 36 to 75 Vdc Input, and Vdc or and Vdc Dual Output 50 W The HW050 Dual-Output Power Modules use advanced surface-mount technology and deliver high-quality, efficient, and compact dc-dc conversion. n Distributed power architectures n Communications equipment n Computer equipment Options n Remote on/off logic choice positive or negative n Short Pins n Dual outputs with tight regulation n Low profile n Small size mm x mm x mm in. x in. x in. n High efficiency typical n Flexible loading between outputs n Fixed frequency n Open frame design no case or potting n Overcurrent protection n Output overvoltage protection n Remote on/off n Wide output voltage adjustment n Overtemperature protection n Wide operating temperature range n ISO* 9001 Certified manufacturing facilities n Complies with ETSI ETI-300-321-2 voltage and current requirements n UL† 60950 Recognized, No. 60950-00 Certified, and VDE § 0805 IEC60950 Licensed n CE mark meets 73/23/EEC and 93/68/EEC directives** The HW050 Dual-Output Power Modules are open frame no case, no potting dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide two precisely regulated dc outputs. The module has a maximum power rating of 50 W, and uses synchronous rectification on both outputs to achieve a typical full-load efficiency of * ISO is a registered trademark of the International Organization for Standardization. † UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. § VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products. HW050AF and HW050FG Power Modules dc-dc Converters 36 to 75 Vdc Input, and Vdc or and Vdc Dual Output 50 W Data Sheet April 2008 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Input Voltage Continuous Transient 2 ms Operating Ambient Temperature See Thermal Considerations section. Storage Temperature I/O Isolation Voltage for 1 minute VI, trans Tstg 80 100 85* 125 1500 Unit Vdc V °C °C Vdc * With derated output power, see Thermal Considerations section. Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Table Input Specifications Parameter Operating Input Voltage Maximum Input Current Inrush Transient Input Reflected-ripple Current, Peak-to-peak 5 Hz to 20 MHz, 12 µH source impedance Input Ripple Rejection 100 Hz EMC, EN55022 VI, nom, full load Unit II, max mAp-p See EMC Consideration section. Ordering Information Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability. Input Voltage 48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V Output Voltage V and V and V and V and V and V and V and V and V Output Power W Device Code HW050AF HW050AF1 HW050AF6 HW050FG HW050FG1 HW050FG6 HW050FG8 HW050FG-B Comcode 108365610 TBD 108958240 108341710 TBD 108891680 108934233 108840190 Optional features may be chosen from the device code suffixes shown below. The feature suffixes are listed numerically in descending order. Please contact your Lineage Power Account Manager or Application Engineer for pricing and availability of options. Option Short pins mm in. + in. Short pins mm in. + in. Negative remote on/off logic Device Code Suffix 8 6 1 Lineage Power Data Sheet April 2008 Notes HW050AF and HW050FG Power Modules dc-dc Converters 36 to 75 Vdc Input, and Vdc or and Vdc Dual Output 50 W Lineage Power HW050AF and HW050FG Power Modules dc-dc Converters 36 to 75 Vdc Input, and Vdc or and Vdc Dual Output 50 W Data Sheet April 2008 A sia-Pacific Head qu art ers T el +65 6 41 6 4283 World W ide Headq u arters Lin eag e Po wer Co rp oratio n 30 00 Skyline D rive, Mesquite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup lin ea gep ower.co m Eu ro pe, M id dle-East an d Afric a He ad qu arters Tel +49 8 9 6089 286 Ind ia Head qu arters Tel +91 8 0 28411633 Lineage Power reserves the right to make changes to the produc t s or information contained herein without notice. No liability is ass umed as a res ult of their use or applic ation. No rights under any patent acc ompany the sale of any s uc h pr oduct s or information. 2008 Lineage Power Corpor ation, Mesquite, Texas All International Rights Res er ved. April 2008 FDS01-029EPS Replaces FDS01-028EPS

PDF Datasheet Preview

Data Sheet April 2008

HW050AF and HW050FG Power Modules dc-dc Converters 36 to 75 Vdc Input, and Vdc or and Vdc Dual Output 50 W

The HW050 Dual-Output Power Modules use advanced surface-mount technology and deliver high-quality, efficient, and compact dc-dc conversion.
n Distributed power architectures n Communications equipment n Computer equipment

Options
n Remote on/off logic choice positive or negative n Short Pins
n Dual outputs with tight regulation n Low profile n Small size mm x mm x mm
in. x in. x in. n High efficiency typical n Flexible loading between outputs n Fixed frequency n Open frame design no case or potting n Overcurrent protection n Output overvoltage protection n Remote on/off n Wide output voltage adjustment n Overtemperature protection n Wide operating temperature range n ISO* 9001 Certified manufacturing facilities n Complies with ETSI ETI-300-321-2 voltage and
current requirements n UL† 60950 Recognized, No. 60950-00

Certified, and VDE § 0805 IEC60950 Licensed n CE mark meets 73/23/EEC and 93/68/EEC
directives**

The HW050 Dual-Output Power Modules are open frame no case, no potting dc-dc converters that operate over an input voltage range of 36 Vdc to 75 Vdc and provide two precisely regulated dc outputs. The module has a maximum power rating of 50 W, and uses synchronous rectification on both outputs to achieve a typical full-load efficiency of
* ISO is a registered trademark of the International Organization for Standardization. † UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. § VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should
be followed. The CE mark is placed on selected products.

HW050AF and HW050FG Power Modules dc-dc Converters 36 to 75 Vdc Input, and Vdc or and Vdc Dual Output 50 W

Data Sheet April 2008

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter

Input Voltage Continuous Transient 2 ms

Operating Ambient Temperature See Thermal Considerations section.

Storage Temperature

I/O Isolation Voltage for 1 minute

VI, trans

Tstg
80 100 85*
125 1500

Unit

Vdc V °C
°C Vdc
* With derated output power, see Thermal Considerations section.

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Table Input Specifications

Parameter Operating Input Voltage Maximum Input Current Inrush Transient Input Reflected-ripple Current, Peak-to-peak
5 Hz to 20 MHz, 12 µH source impedance Input Ripple Rejection 100 Hz EMC, EN55022

VI, nom, full load

Unit

II, max
mAp-p

See EMC Consideration section.
Ordering Information

Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability.

Input Voltage
48 V 48 V 48 V 48 V 48 V 48 V 48 V 48 V

Output Voltage V and V and V and V and V and V and V and V and V

Output Power W

Device Code HW050AF HW050AF1 HW050AF6 HW050FG HW050FG1 HW050FG6 HW050FG8 HW050FG-B

Comcode
108365610 TBD
108958240 108341710

TBD 108891680 108934233 108840190

Optional features may be chosen from the device code suffixes shown below. The feature suffixes are listed numerically in descending order. Please contact your Lineage Power Account Manager or Application Engineer for pricing and availability of options.

Option

Short pins mm in. + in.

Short pins mm in. + in. Negative remote on/off logic

Device Code Suffix 8 6 1

Lineage Power

Data Sheet April 2008

Notes

HW050AF and HW050FG Power Modules dc-dc Converters 36 to 75 Vdc Input, and Vdc or and Vdc Dual Output 50 W

Lineage Power

HW050AF and HW050FG Power Modules dc-dc Converters 36 to 75 Vdc Input, and Vdc or and Vdc Dual Output 50 W

Data Sheet April 2008

A sia-Pacific Head qu art ers T el +65 6 41 6 4283

World W ide Headq u arters Lin eag e Po wer Co rp oratio n 30 00 Skyline D rive, Mesquite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup lin ea gep ower.co m

Eu ro pe, M id dle-East an d Afric a He ad qu arters Tel +49 8 9 6089 286

Ind ia Head qu arters Tel +91 8 0 28411633

Lineage Power reserves the right to make changes to the produc t s or information contained herein without notice. No liability is ass umed as a res ult of their use or applic ation. No rights under any patent acc ompany the sale of any s uc h pr oduct s or information.
2008 Lineage Power Corpor ation, Mesquite, Texas All International Rights Res er ved.

April 2008 FDS01-029EPS Replaces FDS01-028EPS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HW050FG Datasheet file may be downloaded here without warranties.

Datasheet ID: HW050FG 645661