AXH016A0X3

AXH016A0X3 Datasheet

AXH016A0X3

Part	Datasheet
AXH016A0X3	AXH016A0X3 (pdf)

PDF Datasheet Preview
Data Sheet Austin SuperLynxTM 16A SIP Non-Isolated DC-DC Power Module 3Vdc input 0.75Vdc to 3.63Vdc output 16A Output Current • Compliant to RoHS EU Directive 2011/65/EU -Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions • Delivers up to 16A output current • High efficiency 95% at 3.3V full load VIN = 5.0V • Small size and low profile: mm x mm x mm in x in x in • Low output ripple and noise • Distributed power architectures • Intermediate bus voltage applications • Telecommunications equipment • Servers and storage applications • Networking equipment • Enterprise Networks • Latest generation IC’s DSP, FPGA, ASIC and Microprocessor powered applications • High Reliability Calculated MTBF > 6.8M hours at 25oC Full-load • Constant switching frequency 300 kHz • Output voltage programmable from Vdc to 3.63Vdc via external resistor • Line Regulation typical • Load Regulation typical • Temperature Regulation % typical • Remote On/Off • Remote Sense • Output overcurrent protection non-latching • Wide operating temperature range -40°C to 85°C • UL* 60950-1Recognized, CSA† C22.2 No. 60950-103 Certified, and 0805:2001-12 EN60950-1 Licensed • ISO** 9001 and ISO 14001 certified manufacturing facilities Austin SuperLynxTM SIP Single In-line package power modules are non-isolated dc-dc converters that can deliver up to 16A of output current with full load efficiency of at 3.3V output. These modules provide a precisely regulated output voltage programmable via external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . The open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. Standard features include remote On/Off, remote sense, programmable output voltage, overcurrent and overtemperature protection. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards January 20, 2016 2016 General Electric Company. All rights reserved. Data Sheet Austin SuperLynxTM 16A SIP Non-Isolated DC-DC Power Modules 3Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 16A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Operating Ambient Temperature see Thermal Considerations section Storage Temperature Device Unit Tstg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN=3.0V to 5.5V, IO=IO, max Input No Load Current Device Vo VIN - IIN,max Vo = Vdc IIN,No load VIN = 5.0Vdc, IO = 0, module enabled Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Product codes Input Voltage Output Voltage Output Current Efficiency 3.3V 16A AXH016A0X3 5.5Vdc 3.3Vdc AXH016A0X3Z 5.5Vdc 3.3Vdc AXH016A0X3-12* 5.5Vdc 3.3Vdc Connector Type SIP Comcodes 108979592 CC109104964 108993434 * Special code, consult factory before ordering The -12 code has a 100Ω resistor between sense and output pins, internal to the module. Standard code, without the -12 suffix, has a 10Ω resistor between sense and output pins. -Z refers to RoHS-compliant versions. Table Device Option Option Long Pins mm ± 0.25mm in. ± in. Contact GE Sales Representative for availability of these options, samples, minimum order quantity and lead times * When adding multiple options to the product code, add suffix numbers in the descending order Suffix* 5 Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. January 20, 2016 2016 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

Data Sheet

Austin SuperLynxTM 16A SIP Non-Isolated DC-DC Power Module
3Vdc input 0.75Vdc to 3.63Vdc output 16A Output Current
• Compliant to RoHS EU Directive 2011/65/EU -Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions
• Delivers up to 16A output current
• High efficiency 95% at 3.3V full load VIN = 5.0V
• Small size and low profile:
mm x mm x mm in x in x in
• Low output ripple and noise
• Distributed power architectures
• Intermediate bus voltage applications
• Telecommunications equipment
• Servers and storage applications
• Networking equipment
• Enterprise Networks
• Latest generation IC’s DSP, FPGA, ASIC and

Microprocessor powered applications
• High Reliability Calculated MTBF > 6.8M hours at 25oC Full-load
• Constant switching frequency 300 kHz
• Output voltage programmable from Vdc to
3.63Vdc via external resistor
• Line Regulation typical
• Load Regulation typical
• Temperature Regulation % typical
• Remote On/Off
• Remote Sense
• Output overcurrent protection non-latching
• Wide operating temperature range -40°C to 85°C
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-103 Certified, and 0805:2001-12 EN60950-1 Licensed
• ISO** 9001 and ISO 14001 certified manufacturing facilities

Austin SuperLynxTM SIP Single In-line package power modules are non-isolated dc-dc converters that can deliver up to 16A of output current with full load efficiency of at 3.3V output. These modules provide a precisely regulated output voltage programmable via external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . The open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. Standard features include remote On/Off, remote sense, programmable output voltage, overcurrent and overtemperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards

January 20, 2016
2016 General Electric Company. All rights reserved.

Data Sheet

Austin SuperLynxTM 16A SIP Non-Isolated DC-DC Power Modules
3Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 16A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage Continuous Operating Ambient Temperature see Thermal Considerations section Storage Temperature

Device

Unit

Tstg

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage Maximum Input Current VIN=3.0V to 5.5V, IO=IO, max Input No Load Current

Device

Vo VIN -

IIN,max

Vo = Vdc

IIN,No load

VIN = 5.0Vdc, IO = 0, module enabled
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features.

Table Device Codes

Product codes

Input Voltage

Output Voltage

Output Current

Efficiency 3.3V 16A

AXH016A0X3
5.5Vdc
3.3Vdc

AXH016A0X3Z
5.5Vdc
3.3Vdc

AXH016A0X3-12*
5.5Vdc
3.3Vdc

Connector Type SIP

Comcodes 108979592 CC109104964 108993434
* Special code, consult factory before ordering

The -12 code has a 100Ω resistor between sense and output pins, internal to the module. Standard code, without the -12 suffix, has a 10Ω resistor between sense and output pins. -Z refers to RoHS-compliant versions.

Table Device Option

Option**

Long Pins mm ± 0.25mm in. ± in.
** Contact GE Sales Representative for availability of these options, samples, minimum order quantity and lead times *** When adding multiple options to the product code, add suffix numbers in the descending order

Suffix*** 5

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

January 20, 2016
2016 General Electric Company. All International rights reserved.

Version

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AXH016A0X3 Datasheet file may be downloaded here without warranties.

Datasheet ID: AXH016A0X3 645605