AXH010A0X3

AXH010A0X3 Datasheet

AXH010A0X3

Part	Datasheet
AXH010A0X3	AXH010A0X3 (pdf)

PDF Datasheet Preview
Data Sheet Austin LynxTM SIP Non-Isolated DC-DC Power Modules, Programmable 3.0Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current • Compliant to RoHS EU Directive 2011/65/EU -Z versions • Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions • Delivers up to 10A output current • High efficiency 95% at 3.3V full load VIN = 5.0V • Small size and low profile: mm x mm x mm in x in x in • Low output ripple and noise • Distributed power architectures • Intermediate bus voltage applications • Telecommunications equipment • Servers and storage applications • Networking equipment • Enterprise Networks • Latest generation IC’s DSP, FPGA, ASIC and Microprocessor powered applications • High Reliability Calculated MTBF = M hours at 25oC Full-load • Constant switching frequency 300 kHz • Output voltage programmable from Vdc to 3.63Vdc via external resistor • Line Regulation typical • Load Regulation typical • Temperature Regulation % typical • Remote On/Off • Remote Sense • Over temperature protection • Output overcurrent protection non-latching • Wide operating temperature range -40°C to 85°C • UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed • ISO** 9001 and ISO 14001 certified manufacturing facilities Austin LynxTM SIP power modules are non-isolated dc-dc converters that can deliver up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions. * UL is a registered trademark of Underwriters Laboratories, Inc. † CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards October 8, 2015 2015 General Electric Company. All rights reserved. Data Sheet Austin LynxTM SIP Non-Isolated DC-DC Power Modules, Programmable 3.0Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Operating Ambient Temperature see Thermal Considerations section Storage Temperature Device Unit Tstg Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max VO,set = 3.3Vdc Input No Load Current VIN = 5.0Vdc, IO = 0, module enabled Input Stand-by Current VIN = 5.0Vdc, module disabled Inrush Transient Device All Ordering Information Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes Device Code Input Voltage Range Output Voltage Output Current Efficiency 3.3V load Connector Type AXH010A0X3 5.5Vdc 3.63Vdc AXH010A0X3Z 5.5Vdc 3.63Vdc * Remote sense feature is active and pin 6 is added with code suffix “3” -Z refers to RoHS compliant Versions Comcodes 108992046 CC109101318 Contact Us For more information, call us at USA/Canada +1 877 546 3243, or +1 972 244 9288 Asia-Pacific: Europe, Middle-East and Africa: GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information. October 8, 2015 2015 General Electric Company. All International rights reserved. Version

PDF Datasheet Preview

Data Sheet

Austin LynxTM SIP Non-Isolated DC-DC Power Modules, Programmable
3.0Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current
• Compliant to RoHS EU Directive 2011/65/EU -Z versions
• Compliant to RoHS EU Directive 2011/65/EU under exemption 7b Lead solder exemption . Exemption 7b will expire after June 1, 2016 at which time this product will no longer be RoHS compliant non-Z versions
• Delivers up to 10A output current
• High efficiency 95% at 3.3V full load VIN = 5.0V
• Small size and low profile:
mm x mm x mm in x in x in
• Low output ripple and noise
• Distributed power architectures
• Intermediate bus voltage applications
• Telecommunications equipment
• Servers and storage applications
• Networking equipment
• Enterprise Networks
• Latest generation IC’s DSP, FPGA, ASIC and

Microprocessor powered applications
• High Reliability Calculated MTBF = M hours at 25oC Full-load
• Constant switching frequency 300 kHz
• Output voltage programmable from Vdc to
3.63Vdc via external resistor
• Line Regulation typical
• Load Regulation typical
• Temperature Regulation % typical
• Remote On/Off
• Remote Sense
• Over temperature protection
• Output overcurrent protection non-latching
• Wide operating temperature range -40°C to 85°C
• UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-03 Certified, and 0805:2001-12 EN60950-1 Licensed
• ISO** 9001 and ISO 14001 certified manufacturing facilities

Austin LynxTM SIP power modules are non-isolated dc-dc converters that can deliver up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage VIN = 5.5Vdc . Their open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards

October 8, 2015
2015 General Electric Company. All rights reserved.

Data Sheet

Austin LynxTM SIP Non-Isolated DC-DC Power Modules, Programmable
3.0Vdc 5.5Vdc input 0.75Vdc to 3.63Vdc output 10A Output Current

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability.

Parameter Input Voltage

Continuous Operating Ambient Temperature
see Thermal Considerations section Storage Temperature

Device

Unit

Tstg

Electrical Specifications

Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.

Parameter Operating Input Voltage Maximum Input Current VIN= VIN, min to VIN, max, IO=IO, max VO,set = 3.3Vdc Input No Load Current

VIN = 5.0Vdc, IO = 0, module enabled

Input Stand-by Current VIN = 5.0Vdc, module disabled

Inrush Transient

Device All
Ordering Information

Please contact your GE Sales Representative for pricing, availability and optional features. Table Device Codes

Device Code

Input Voltage Range

Output Voltage

Output Current

Efficiency 3.3V load

Connector Type

AXH010A0X3
5.5Vdc
3.63Vdc

AXH010A0X3Z
5.5Vdc
3.63Vdc
* Remote sense feature is active and pin 6 is added with code suffix “3” -Z refers to RoHS compliant Versions

Comcodes
108992046 CC109101318

Contact Us

For more information, call us at

USA/Canada +1 877 546 3243, or +1 972 244 9288

Asia-Pacific:

Europe, Middle-East and Africa:

GE Critical Power reserves the right to make changes to the product s or information contained herein without notice, and no liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product s or information.

October 8, 2015
2015 General Electric Company. All International rights reserved.

Version

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AXH010A0X3 Datasheet file may be downloaded here without warranties.

Datasheet ID: AXH010A0X3 645598