USB-ICP-LPC2K

USB-ICP-LPC2K Datasheet


USB-ICP

Part Datasheet
USB-ICP-LPC2K USB-ICP-LPC2K USB-ICP-LPC2K (pdf)
PDF Datasheet Preview
USB-ICP

USB In-Circuit Programmer

USB-ICP supports In-System Programming ISP on Philips ARM7 LPC2xxx microcontroller family. In-System Programming uses a two-wire serial interface to program and erase ISP enabled microcontroller devices without removing them from the system. The ISP function uses only six pins VCC, GND, RXD, TXD, P0.14 and RESETn. A small connector is all that is needed to interface your ISP application to the USB-ICP programmer.

Highlights
• USB port powered so no external Power Supply required
• Supports USB
• Plugs directly into any standard USB Port great for laptops
• Supports Philips’ ARM 7 LPC21xx and LPC22xx family of microcontrollers
• Works with Philips’ free flash utility that can be downloaded from the web
• USB-ICP Kit Includes:

USB-ICP dongle
18” cable allowing direct connection to the user's application

ISP design guide for the user’s target board

Technical Details

Target Schematic

USB-ICP uses a standard RJ-45 for connection to the target cable.

Indicator LEDs Green “Link” Indicates the USB-ICP has been configured by the host PC

Yellow indicates USB Activity Rx/Tx

The ISP function uses only six pins VCC, GND, RXD, TXD, P0.14 and RESETn. The simple circuit above is all that must be added to the user’s application to use ISP with USB-ICP.

Target Connector
Ordering Information

Part Number USB-ICP-LPC2K

Order Online

Digi-Key P/N 622-1005-ND

Warranty 30-day money back guarantee Availability Stock
800 278-0293 Phone 256 883-1241 FAX

The target connector utilized is a standard pitch 6-pin header available from numerous suppliers.

Example Molex Part Numbers
22-03-2061
6pin vertical through hole
68301-1017
6pin vertical surface mount
22-05-2061
6pin right angle through hole

USB-ICP Family

Supports

USB-ICP-LPC9xx

Philips LPC9xx

USB-ICP-80C51ISP

Philips P89C51 Flash

USB-ICP-LPC2K

Philips ARM7 LPC2xxx

All brand names and product names are trademarks or registered trademarks of their respective holders.
More datasheets: FLTR100V10 | FLTR100V610Z | FLTR100V10-62Z | RURG30100 | DBM25SLNMBK52 | 70V9289L9PFI | 70V9389L7PRFG8 | C5044.41.01 | CA3102R18-10P | 132015-0075


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived USB-ICP-LPC2K Datasheet file may be downloaded here without warranties.

Datasheet ID: USB-ICP-LPC2K 635729