F2M03AC2-KIT-1

F2M03AC2-KIT-1 Datasheet

The Free2move evaluation board is designed to make it easy for customers to start using the Free2move Bluetooth modules. By default the evaluation board is delivered with the Fre2move Wireless UART WU firmware, but is also available with other firmware options such as headset etc. The WU implements the Bluetooth serial port profile data flows transparent through the serial port to the remote device. The board currently supports the F2M03C1 and F2M03AC2 modules. For convenience the Bluetooth modules are mounted on a separate exchangeable carrier board OEM Bluetooth board .<br>• PCB, 1000 32 01, OEM Carrier board with F2M03C1.<br>• PCB, 1000 22 04, OEM Carrier board with F2M02AC2. This document shall be read in conjunction with the Bluetooth module datasheets and the datasheet corresponding to your firmware choice.

Part	Datasheet
F2M03AC2-KIT-1	F2M03AC2-KIT-1 (pdf)

Related Parts	Information
F2M03AC2-KIT 2	F2M03AC2-KIT 2
F2M03C1-KIT-1	F2M03C1-KIT-1

PDF Datasheet Preview
USER MANUAL Free2move Evaluation Board BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Free2move Table of contents 1 Introduction 2 Included with the Evaluation board 3 Getting Started with Wireless UART firmware 4 Evaluation board Power supply 4 Pin out to the OEM Bluetooth board. 5 Schematics and PCB layout. 2003 Free2move AB Page 2 8 1 Introduction The Free2move evaluation board is designed to make it easy for customers to start using the Free2move Bluetooth modules. By default the evaluation board is delivered with the Fre2move Wireless UART WU firmware, but is also available with other firmware options such as headset etc. The WU implements the Bluetooth serial port profile data flows transparent through the serial port to the remote device. The board currently supports the F2M03C1 and F2M03AC2 modules. For convenience the Bluetooth modules are mounted on a separate exchangeable carrier board OEM Bluetooth board . • PCB, 1000 32 01, OEM Carrier board with F2M03C1. • PCB, 1000 22 04, OEM Carrier board with F2M02AC2. This document shall be read in conjunction with the Bluetooth module datasheets and the datasheet corresponding to your firmware choice. 2 Included with the Evaluation board • Evaluation Board, 1000 34 • OEM Bluetooth board • 5V DC adaptor. • Serial cable. • CD with documentation and configuration software WU firmware 2003 Free2move AB Page 3 8 3 Getting Started with Wireless UART firmware To use the Bluetooth serial profile, Free2move provides the Bluetooth modules with its Wireless UART firmware. • Install the Free2move Configuration software, included on the CD, on your computer running windows 2000 or later is preferred . • Connect the Evaluation board to your computer by using the serial cable. • Connect the 5VDC adapter included or any other power supply delivering +5V/400mA to the power supply connector J4. There is no need to get the polarity right on the supplied power. • Start the Configuration software. More information about the configuration software and Wireless UART is included on the CD. 4 Evaluation board interfaces The evaluation board includes some external interfaces. Power supply Use the included 5VDC adapter to supply power to the connector J4. Polarity of power does not matter. RS-232 The JP1 is a DB-9 RS-232 connector. Pin out is according to the specification below. RS-232 signal 1 CD 2 TxD 3 RxD 4 DSR 5 GND 6 DTR 7 CTS 8 RTS 9 Vcc Power Direction Not connected Output Input Not connected Not connected Input Output Input 4-5V 5 4 3 21 987 6 Evaluation board connector female Buttons There are six buttons and six LEDs connected to six different PIO lines of the module. The buttons are active high i.e. when it is pressed 3V is applied to the corresponding input of the module. The LEDS are mainly intended t show the status of outputs and the buttons to control inputs. There is a label for each button and LED declaring which I/O they are connected to. The functionality of the PIO lines differs depending on which firmware version is used. Information about this functionality is included in firmware datasheet e.g. the Wireless UART datasheet 2003 Free2move AB Page 4 8

PDF Datasheet Preview

USER MANUAL Free2move Evaluation Board

BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Free2move

Table of contents
1 Introduction 2 Included with the Evaluation board 3 Getting Started with Wireless UART firmware 4 Evaluation board

Power supply 4 Pin out to the OEM Bluetooth board. 5 Schematics and PCB layout.
2003 Free2move AB

Page 2 8
1 Introduction

The Free2move evaluation board is designed to make it easy for customers to start using the Free2move Bluetooth modules. By default the evaluation board is delivered with the Fre2move Wireless UART WU firmware, but is also available with other firmware options such as headset etc. The WU implements the Bluetooth serial port profile data flows transparent through the serial port to the remote device. The board currently supports the F2M03C1 and F2M03AC2 modules. For convenience the Bluetooth modules are mounted on a separate exchangeable carrier board OEM Bluetooth board .
• PCB, 1000 32 01, OEM Carrier board with F2M03C1.
• PCB, 1000 22 04, OEM Carrier board with F2M02AC2. This document shall be read in conjunction with the Bluetooth module datasheets and the datasheet corresponding to your firmware choice.
2 Included with the Evaluation board
• Evaluation Board, 1000 34
• OEM Bluetooth board
• 5V DC adaptor.
• Serial cable.
• CD with documentation and configuration software WU firmware
2003 Free2move AB

Page 3 8
3 Getting Started with Wireless UART firmware

To use the Bluetooth serial profile, Free2move provides the Bluetooth modules with its Wireless UART firmware.
• Install the Free2move Configuration software, included on the CD, on your computer running windows 2000 or later is preferred .
• Connect the Evaluation board to your computer by using the serial cable.
• Connect the 5VDC adapter included or any other power supply delivering +5V/400mA to the power
supply connector J4. There is no need to get the polarity right on the supplied power.
• Start the Configuration software. More information about the configuration software and Wireless UART
is included on the CD.
4 Evaluation board interfaces

The evaluation board includes some external interfaces.

Power supply

Use the included 5VDC adapter to supply power to the connector J4. Polarity of power does not matter.

RS-232

The JP1 is a DB-9 RS-232 connector. Pin out is according to the specification below.

RS-232 signal
1 CD 2 TxD 3 RxD
4 DSR 5 GND 6 DTR 7 CTS
8 RTS 9 Vcc Power

Direction Not connected Output Input Not connected

Not connected Input Output Input 4-5V
5 4 3 21
987 6

Evaluation board connector female

Buttons

There are six buttons and six LEDs connected to six different PIO lines of the module. The buttons are active high i.e. when it is pressed 3V is applied to the corresponding input of the module.

The LEDS are mainly intended t show the status of outputs and the buttons to control inputs.

There is a label for each button and LED declaring which I/O they are connected to.

The functionality of the PIO lines differs depending on which firmware version is used. Information about this functionality is included in firmware datasheet e.g. the Wireless UART datasheet
2003 Free2move AB

Page 4 8

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived F2M03AC2-KIT-1 Datasheet file may be downloaded here without warranties.

Datasheet ID: F2M03AC2-KIT-1 635384