T496X476M020AT

T496X476M020AT Datasheet

T496 Series Fused MnO2

Part	Datasheet
T496X476M020AT	T496X476M020AT (pdf)

Related Parts	Information
T496C475M025AT	T496C475M025AT
T496X476K020AT	T496X476K020AT

PDF Datasheet Preview
Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2 Overview The T496 Series of tantalum chip capacitors offers a "fail safe" design. The built-in fuse element offers excellent protection from damaging short circuit conditions in applications where damaging high fault currents exist. • Meets or exceeds EIA Standard 535BAAC • Patented fuse assembly • Optional gold-plated terminations • Built-in fuse protects against short circuit mode • 100% surge current test on C, D, and X sizes • Halogen-free epoxy • Capacitance values of uF to 330 uF • Tolerances of ±10% and ±20% • Voltage rating of 4 50 VDC • Fuse activation, 25°C within 1 second at fault currents of 4 amps and higher • Continuous current capability amps • Post actuation resistance, 25°C 10 MΩ, minimum • Test tabs on side of case bypass the capacitor element to allow direct testing of the fuse assembly • RoHS Compliant and lead-free terminations • Operating temperature range of −55°C to +125°C Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Typical applications include decoupling and filtering in computing and telecommunications end applications, such as highend servers requiring built-in fuse capability. Environmental Compliance RoHS Compliant 6/6 according to Directive 2002/95/EC when ordered with 100% Sn solder. KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • One world. One KEMET T2010_T496 • 9/22/2016 1 Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2 K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information Capacitor Class T= Tantalum Series Fail Safe Case Size Capacitance Code pF B First two digits represent significant X figures. Third digit specifies number of zeros. Capacitance Rated Voltage Failure Rate/ Termination Tolerance Design Finish K = ±10% M = ±20% 004 = 4 006 = 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 A = N/A T = 100% Matte Tin Sn plated H = Standard solder coated SnPb 5% Pb minimum E500 E = ESR Last three digits specify ESR in mΩ 500 = 500 Packaging C-Spec Blank = 7" Reel 7280 = 13" Reel Performance Characteristics Item Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF 120 Hz ESR 100 kHz Leakage Current Performance Characteristics −55°C to 125°C 477 µF at 120 Hz/25°C K Tolerance 10% , M Tolerance 20% 4 50 V Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table CV µA at rated voltage after 5 minutes KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • T2010_T496 • 9/22/2016 2 Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2 Qualification Test Condition Endurance 85°C at rated voltage, 2,000 hours 125°C at 2/3 rated voltage, 2,000 hours Storage Life 125°C at 0 volts, 2,000 hours Thermal Shock 1 To complete KEMET part number, insert M for ± 20% or K for ± Designates Capacitance tolerance. 2 To complete KEMET part number, insert T = 100% Matte Tin Sn Plated, H = Standard Solder coated SnPb 5% Pb minimum . Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • T2010_T496 • 9/22/2016 5 Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2 Table 1 Ratings & Part Number Reference cont'd Rated Voltage VDC at 85ºC 10 16 VDC at 85ºC Rated Voltage Rated Cap 22 33 47 68 100 150 220 10 15 22 33 47 68 Rated Cap Case Code/ Case Size KEMET Part Number KEMET/EIA C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 X/7343-43 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 KEMET/EIA See below for part options T496C226 1 010A 2 E2K0 T496C226 1 010A 2 E500 T496D336 1 010A 2 E1K0 T496D336 1 010A 2 E400 T496C336 1 010A 2 E1K6 T496C336 1 010A 2 E400 T496D476 1 010A 2 E1K0 T496D476 1 010A 2 E400 T496C476 1 010A 2 E1K2 T496C476 1 010A 2 E400 T496X686 1 010A 2 E900 T496D686 1 010A 2 E800 T496D686 1 010A 2 E400 T496X107 1 010A 2 E400 T496D107 1 010A 2 E700 T496D107 1 010A 2 E400 T496X157 1 010A 2 E700 T496X157 1 010A 2 E400 T496D157 1 010A 2 E700 T496D157 1 010A 2 E400 T496X227 1 010A 2 E500 T496X227 1 010A 2 E300 T496D227 1 010A 2 E300 T496B225 1 016A 2 E3K5 T496B335 1 016A 2 E3K5 T496B335 1 016A 2 E2K1 T496B475 1 016A 2 E3K5 T496B475 1 016A 2 E1K6 T496C685 1 016A 2 E2K0 T496C685 1 016A 2 E600 T496B106 1 016A 2 E3K5 T496C106 1 016A 2 E2K0 T496C106 1 016A 2 E700 T496C156 1 016A 2 E2K0 T496C156 1 016A 2 E600 T496D226 1 016A 2 E1K0 T496D226 1 016A 2 E500 T496C226 1 016A 2 E1K6 T496C226 1 016A 2 E1K0 T496D336 1 016A 2 E1K0 T496D336 1 016A 2 E400 T496X476 1 016A 2 E900 T496X476 1 016A 2 E400 T496D476 1 016A 2 E800 T496D476 1 016A 2 E400 T496D686 1 016A 2 E400 See below for part options DC Leakage µA at +20ºC Max/5 Min µA at +20ºC Max/5 Min DF ESR % at +20ºC mΩ at +20ºC 120 Hz % Max 100 kHz Max 2000 1000 1600 1000 1200 3500 3500 2100 3500 1600 2000 3500 2000 2000 1000 1 To complete KEMET part number, insert M for ± 20% or K for ± Designates Capacitance tolerance. 2 To complete KEMET part number, insert T = 100% Matte Tin Sn Plated, H = Standard Solder coated SnPb 5% Pb minimum . Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • T2010_T496 • 9/22/2016 6 Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2 Table 1 Ratings & Part Number Reference cont'd Rated Voltage VDC at 85ºC 16 20 25 35 VDC at 85ºC Rated Voltage Rated Cap 100 10 15 22 33 47 1 10 15 22 Rated Cap Case Code/ Case Size KEMET Part Number KEMET/EIA X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 KEMET/EIA See below for part options T496X107 1 016A 2 E700 T496B155 1 020A 2 E5K0 T496B225 1 020A 2 E3K5 T496B225 1 020A 2 E1K6 T496B335 1 020A 2 E3K5 T496C475 1 020A 2 E2K0 T496C685 1 020A 2 E2K0 T496C685 1 020A 2 E600 T496C106 1 020A 2 E2K0 T496C106 1 020A 2 E800 T496D156 1 020A 2 E1K0 T496D156 1 020A 2 E500 T496C156 1 020A 2 E500 T496D226 1 020A 2 E1K0 T496D226 1 020A 2 E500 T496X336 1 020A 2 E900 T496X336 1 020A 2 E400 T496D336 1 020A 2 E400 T496X476 1 020A 2 E300 T496D476 1 020A 2 E300 T496B684 1 025A 2 E6K5 T496B105 1 025A 2 E5K0 T496B105 1 025A 2 E3K5 T496B155 1 025A 2 E5K0 T496B155 1 025A 2 E1K6 T496C225 1 025A 2 E3K5 T496C335 1 025A 2 E2K5 T496C335 1 025A 2 E2K1 T496B475 1 025A 2 E4K0 T496C475 1 025A 2 E2K5 T496C475 1 025A 2 E1K3 T496C685 1 025A 2 E2K0 T496C685 1 025A 2 E600 T496C106 1 025A 2 E600 T496D106 1 025A 2 E1K2 T496D106 1 025A 2 E600 T496C156 1 025A 2 E750 T496D156 1 025A 2 E1K0 T496D156 1 025A 2 E500 T496X226 1 025A 2 E900 T496X226 1 025A 2 E400 T496D226 1 025A 2 E800 T496D226 1 025A 2 E400 T496B474 1 035A 2 E8K0 T496B474 1 035A 2 E2K6 T496B684 1 035A 2 E6K5 See below for part options DC Leakage µA at +20ºC Max/5 Min µA at +20ºC Max/5 Min DF ESR % at +20ºC mΩ at +20ºC 120 Hz % Max 100 kHz Max 5000 3500 1600 3500 2000 2000 2000 1000 1000 6500 5000 3500 5000 1600 3500 1 To complete KEMET part number, insert M for ± 20% or K for ± Designates Capacitance tolerance. 2 To complete KEMET part number, insert T = 100% Matte Tin Sn Plated, H = Standard Solder coated SnPb 5% Pb minimum . Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • T2010_T496 • 9/22/2016 7 Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2 Table 1 Ratings & Part Number Reference cont'd Rated Voltage VDC at 85ºC 35 50 VDC at 85ºC Rated Voltage Rated Cap 1 10 15 22 1 Rated Cap Case Code/ Case Size KEMET Part Number KEMET/EIA B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 KEMET/EIA See below for part options T496B105 1 035A 2 E5K0 T496B105 1 035A 2 E3K1 T496C155 1 035A 2 E4K5 T496C155 1 035A 2 E2K6 T496C225 1 035A 2 E3K5 T496C225 1 035A 2 E1K6 T496C335 1 035A 2 E2K5 T496C335 1 035A 2 E900 T496D475 1 035A 2 E1K5 T496D475 1 035A 2 E700 T496D685 1 035A 2 E1K3 T496D685 1 035A 2 E750 T496X106 1 035A 2 E1K0 T496X106 1 035A 2 E500 T496D106 1 035A 2 E400 T496X156 1 035A 2 E900 T496X156 1 035A 2 E500 T496D156 1 035A 2 E500 T496X226 1 035A 2 E300 T496B154 1 050A 2 E16K T496B224 1 050A 2 E14K T496B224 1 050A 2 E10K T496B334 1 050A 2 E10K T496B334 1 050A 2 E2K6 T496C474 1 050A 2 E8K0 T496C474 1 050A 2 E1K9 T496C684 1 050A 2 E7K0 T496C684 1 050A 2 E1K7 T496C105 1 050A 2 E5K5 T496C105 1 050A 2 E2K7 T496C155 1 050A 2 E5K0 T496C155 1 050A 2 E2K0 T496D225 1 050A 2 E2K5 T496D225 1 050A 2 E900 T496D335 1 050A 2 E2K0 T496D335 1 050A 2 E1K0 T496X475 1 050A 2 E1K5 T496X475 1 050A 2 E400 T496D475 1 050A 2 E400 See below for part options DC Leakage µA at +20ºC Max/5 Min µA at +20ºC Max/5 Min DF ESR % at +20ºC mΩ at +20ºC 120 Hz % Max 100 kHz Max 5000 3100 4500 2600 3500 1600 2500 1500 1300 1000 16000 14000 10000 10000 2600 1 To complete KEMET part number, insert M for ± 20% or K for ± Designates Capacitance tolerance. 2 To complete KEMET part number, insert T = 100% Matte Tin Sn Plated, H = Standard Solder coated SnPb 5% Pb minimum . Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • T2010_T496 • 9/22/2016 8 Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2 Recommended Voltage Derating Guidelines % Change in Working DC Voltage with Temperature Recommended Maximum Application Voltage −55°C to 85°C VR 50% of VR 85°C to 125°C 67% of VR 33% of VR % Working Voltage 120% 100% 80% 60% % Change in Working DC Voltage with Temperature Recommended Maximum Application Voltage As % of Rated Voltage 0% −55 Temperature ºC 67% 33% 125 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance ESR and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: Temperature Compensation Multipliers for Maximum Ripple Current T 25°C T 85°C T 125°C T= Environmental Temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multip KEMET Case Code A B C D X E S T U V T510X T510E EIA Case Code Maximum Power Dissipation P max mWatts at 25°C w/+20°C Rise 75 85 110 150 165 200 60 70 90 125 270 285 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I max = max/R E max = Z max/R I = rms ripple current amperes E = rms ripple voltage volts P max = maximum power dissipation watts R = ESR at specified frequency ohms Z = Impedance at specified frequency ohms KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • T2010_T496 • 9/22/2016 9 Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2 Temperature

PDF Datasheet Preview

Tantalum Surface Mount Capacitors Fused

T496 Series Fused MnO2

Overview

The T496 Series of tantalum chip capacitors offers a "fail safe" design. The built-in fuse element offers excellent protection from damaging short circuit conditions in applications where damaging high fault currents exist.
• Meets or exceeds EIA Standard 535BAAC
• Patented fuse assembly
• Optional gold-plated terminations
• Built-in fuse protects against short circuit mode
• 100% surge current test on C, D, and X sizes
• Halogen-free epoxy
• Capacitance values of uF to 330 uF
• Tolerances of ±10% and ±20%
• Voltage rating of 4 50 VDC
• Fuse activation, 25°C within 1 second at fault currents
of 4 amps and higher
• Continuous current capability amps
• Post actuation resistance, 25°C 10 MΩ, minimum
• Test tabs on side of case bypass the capacitor element to
allow direct testing of the fuse assembly
• RoHS Compliant and lead-free terminations
• Operating temperature range of −55°C to +125°C

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

Typical applications include decoupling and filtering in computing and telecommunications end applications, such as highend servers requiring built-in fuse capability.

Environmental Compliance

RoHS Compliant 6/6 according to Directive 2002/95/EC when ordered with 100% Sn solder.

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

One world. One KEMET T2010_T496
• 9/22/2016 1

Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2

K-SIM

For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.
Ordering Information

Capacitor Class

T= Tantalum

Series

Fail Safe

Case Size

Capacitance Code pF

B First two digits
represent
significant

X figures. Third digit
specifies number
of zeros.

Capacitance Rated Voltage Failure Rate/ Termination

Tolerance

Design

Finish

K = ±10% M = ±20%
004 = 4 006 = 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50

A = N/A

T = 100% Matte Tin Sn plated H = Standard solder coated SnPb 5% Pb minimum

E500

E = ESR Last three digits specify ESR in mΩ 500 = 500

Packaging C-Spec

Blank = 7" Reel 7280 = 13" Reel

Performance Characteristics

Item

Operating Temperature Rated Capacitance Range

Capacitance Tolerance Rated Voltage Range DF 120 Hz ESR 100 kHz Leakage Current

Performance Characteristics
−55°C to 125°C 477 µF at 120 Hz/25°C K Tolerance 10% , M Tolerance 20% 4 50 V Refer to Part Number Electrical Specification Table Refer to Part Number Electrical Specification Table CV µA at rated voltage after 5 minutes

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

T2010_T496
• 9/22/2016 2

Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2

Qualification

Test

Condition

Endurance
85°C at rated voltage, 2,000 hours 125°C at 2/3 rated voltage, 2,000 hours

Storage Life 125°C at 0 volts, 2,000 hours

Thermal Shock
1 To complete KEMET part number, insert M for ± 20% or K for ± Designates Capacitance tolerance. 2 To complete KEMET part number, insert T = 100% Matte Tin Sn Plated, H = Standard Solder coated SnPb 5% Pb minimum . Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series.

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

T2010_T496
• 9/22/2016 5

Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2

Table 1 Ratings & Part Number Reference cont'd

Rated Voltage

VDC at 85ºC
10 16

VDC at 85ºC

Rated Voltage

Rated Cap
22 33 47 68 100 150 220 10 15 22 33 47 68

Rated Cap

Case Code/ Case Size

KEMET Part Number

KEMET/EIA

C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 X/7343-43 D/7343-31 D/7343-31 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31

KEMET/EIA

See below for part options

T496C226 1 010A 2 E2K0 T496C226 1 010A 2 E500 T496D336 1 010A 2 E1K0 T496D336 1 010A 2 E400 T496C336 1 010A 2 E1K6 T496C336 1 010A 2 E400 T496D476 1 010A 2 E1K0 T496D476 1 010A 2 E400 T496C476 1 010A 2 E1K2 T496C476 1 010A 2 E400 T496X686 1 010A 2 E900 T496D686 1 010A 2 E800 T496D686 1 010A 2 E400 T496X107 1 010A 2 E400 T496D107 1 010A 2 E700 T496D107 1 010A 2 E400 T496X157 1 010A 2 E700 T496X157 1 010A 2 E400 T496D157 1 010A 2 E700 T496D157 1 010A 2 E400 T496X227 1 010A 2 E500 T496X227 1 010A 2 E300 T496D227 1 010A 2 E300 T496B225 1 016A 2 E3K5 T496B335 1 016A 2 E3K5 T496B335 1 016A 2 E2K1 T496B475 1 016A 2 E3K5 T496B475 1 016A 2 E1K6 T496C685 1 016A 2 E2K0 T496C685 1 016A 2 E600 T496B106 1 016A 2 E3K5 T496C106 1 016A 2 E2K0 T496C106 1 016A 2 E700 T496C156 1 016A 2 E2K0 T496C156 1 016A 2 E600 T496D226 1 016A 2 E1K0 T496D226 1 016A 2 E500 T496C226 1 016A 2 E1K6 T496C226 1 016A 2 E1K0 T496D336 1 016A 2 E1K0 T496D336 1 016A 2 E400 T496X476 1 016A 2 E900 T496X476 1 016A 2 E400 T496D476 1 016A 2 E800 T496D476 1 016A 2 E400 T496D686 1 016A 2 E400

See below for part options

DC Leakage
µA at +20ºC Max/5 Min
µA at +20ºC Max/5 Min

DF ESR
% at +20ºC mΩ at +20ºC 120 Hz % Max 100 kHz Max
2000
1000
1600
1000
1200
3500
3500
2100
3500
1600
2000
3500
2000
2000
1000
1 To complete KEMET part number, insert M for ± 20% or K for ± Designates Capacitance tolerance. 2 To complete KEMET part number, insert T = 100% Matte Tin Sn Plated, H = Standard Solder coated SnPb 5% Pb minimum . Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series.

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

T2010_T496
• 9/22/2016 6

Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2

Table 1 Ratings & Part Number Reference cont'd

Rated Voltage

VDC at 85ºC
16 20 25 35

VDC at 85ºC

Rated Voltage

Rated Cap
100 10 15 22 33 47 1 10 15 22

Rated Cap

Case Code/ Case Size

KEMET Part Number

KEMET/EIA

X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21

KEMET/EIA

See below for part options

T496X107 1 016A 2 E700 T496B155 1 020A 2 E5K0 T496B225 1 020A 2 E3K5 T496B225 1 020A 2 E1K6 T496B335 1 020A 2 E3K5 T496C475 1 020A 2 E2K0 T496C685 1 020A 2 E2K0 T496C685 1 020A 2 E600 T496C106 1 020A 2 E2K0 T496C106 1 020A 2 E800 T496D156 1 020A 2 E1K0 T496D156 1 020A 2 E500 T496C156 1 020A 2 E500 T496D226 1 020A 2 E1K0 T496D226 1 020A 2 E500 T496X336 1 020A 2 E900 T496X336 1 020A 2 E400 T496D336 1 020A 2 E400 T496X476 1 020A 2 E300 T496D476 1 020A 2 E300 T496B684 1 025A 2 E6K5 T496B105 1 025A 2 E5K0 T496B105 1 025A 2 E3K5 T496B155 1 025A 2 E5K0 T496B155 1 025A 2 E1K6 T496C225 1 025A 2 E3K5 T496C335 1 025A 2 E2K5 T496C335 1 025A 2 E2K1 T496B475 1 025A 2 E4K0 T496C475 1 025A 2 E2K5 T496C475 1 025A 2 E1K3 T496C685 1 025A 2 E2K0 T496C685 1 025A 2 E600 T496C106 1 025A 2 E600 T496D106 1 025A 2 E1K2 T496D106 1 025A 2 E600 T496C156 1 025A 2 E750 T496D156 1 025A 2 E1K0 T496D156 1 025A 2 E500 T496X226 1 025A 2 E900 T496X226 1 025A 2 E400 T496D226 1 025A 2 E800 T496D226 1 025A 2 E400 T496B474 1 035A 2 E8K0 T496B474 1 035A 2 E2K6 T496B684 1 035A 2 E6K5

See below for part options

DC Leakage
µA at +20ºC Max/5 Min
µA at +20ºC Max/5 Min

DF ESR
% at +20ºC mΩ at +20ºC 120 Hz % Max 100 kHz Max
5000
3500
1600
3500
2000
2000
2000
1000
1000
6500
5000
3500
5000
1600
3500
1 To complete KEMET part number, insert M for ± 20% or K for ± Designates Capacitance tolerance. 2 To complete KEMET part number, insert T = 100% Matte Tin Sn Plated, H = Standard Solder coated SnPb 5% Pb minimum . Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series.

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

T2010_T496
• 9/22/2016 7

Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2

Table 1 Ratings & Part Number Reference cont'd

Rated Voltage

VDC at 85ºC
35 50

VDC at 85ºC

Rated Voltage

Rated Cap
1 10 15 22 1

Rated Cap

Case Code/ Case Size

KEMET Part Number

KEMET/EIA

B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 X/7343-43 D/7343-31 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31

KEMET/EIA

See below for part options

T496B105 1 035A 2 E5K0 T496B105 1 035A 2 E3K1 T496C155 1 035A 2 E4K5 T496C155 1 035A 2 E2K6 T496C225 1 035A 2 E3K5 T496C225 1 035A 2 E1K6 T496C335 1 035A 2 E2K5 T496C335 1 035A 2 E900 T496D475 1 035A 2 E1K5 T496D475 1 035A 2 E700 T496D685 1 035A 2 E1K3 T496D685 1 035A 2 E750 T496X106 1 035A 2 E1K0 T496X106 1 035A 2 E500 T496D106 1 035A 2 E400 T496X156 1 035A 2 E900 T496X156 1 035A 2 E500 T496D156 1 035A 2 E500 T496X226 1 035A 2 E300 T496B154 1 050A 2 E16K T496B224 1 050A 2 E14K T496B224 1 050A 2 E10K T496B334 1 050A 2 E10K T496B334 1 050A 2 E2K6 T496C474 1 050A 2 E8K0 T496C474 1 050A 2 E1K9 T496C684 1 050A 2 E7K0 T496C684 1 050A 2 E1K7 T496C105 1 050A 2 E5K5 T496C105 1 050A 2 E2K7 T496C155 1 050A 2 E5K0 T496C155 1 050A 2 E2K0 T496D225 1 050A 2 E2K5 T496D225 1 050A 2 E900 T496D335 1 050A 2 E2K0 T496D335 1 050A 2 E1K0 T496X475 1 050A 2 E1K5 T496X475 1 050A 2 E400 T496D475 1 050A 2 E400

See below for part options

DC Leakage
µA at +20ºC Max/5 Min
µA at +20ºC Max/5 Min

DF ESR
% at +20ºC mΩ at +20ºC 120 Hz % Max 100 kHz Max
5000
3100
4500
2600
3500
1600
2500
1500
1300
1000
16000
14000
10000
10000
2600
1 To complete KEMET part number, insert M for ± 20% or K for ± Designates Capacitance tolerance. 2 To complete KEMET part number, insert T = 100% Matte Tin Sn Plated, H = Standard Solder coated SnPb 5% Pb minimum . Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series.

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

T2010_T496
• 9/22/2016 8

Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2

Recommended Voltage Derating Guidelines
% Change in Working DC Voltage with Temperature

Recommended Maximum Application Voltage
−55°C to 85°C VR
50% of VR
85°C to 125°C 67% of VR 33% of VR
% Working Voltage
120%
100%
80% 60%
% Change in Working DC Voltage with Temperature

Recommended Maximum Application Voltage

As % of Rated Voltage
0% −55

Temperature ºC
67% 33% 125

Ripple Current/Ripple Voltage

Permissible AC ripple voltage and current are related to equivalent series resistance ESR and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria:

Temperature Compensation Multipliers for Maximum Ripple Current

T 25°C

T 85°C

T 125°C

T= Environmental Temperature

The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multip

KEMET Case Code

A B C D X E S T U V T510X T510E

EIA Case Code

Maximum Power Dissipation P max
mWatts at 25°C w/+20°C Rise
75 85 110 150 165 200 60 70 90 125 270 285

Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined.

I max = max/R E max = Z max/R

I = rms ripple current amperes E = rms ripple voltage volts P max = maximum power dissipation watts R = ESR at specified frequency ohms Z = Impedance at specified frequency ohms

KEMET Electronics Corporation
• P.O. Box 5928
• Greenville, SC 29606
• 864-963-6300
•

T2010_T496
• 9/22/2016 9

Tantalum Surface Mount Capacitors Fused T496 Series Fused MnO2

Temperature

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived T496X476M020AT Datasheet file may be downloaded here without warranties.

Datasheet ID: T496X476M020AT 644803