FTLX1412D3BCL

FTLX1412D3BCL Datasheet

FTLX1412D3BCL

Part	Datasheet
FTLX1412D3BCL	FTLX1412D3BCL (pdf)

PDF Datasheet Preview
Finisar Product Specification RoHS-6 Compliant 10Gb/s 10km Datacom XFP Optical Transceiver FTLX1412D3BCL PRODUCT FEATURES • Supports 9.95Gb/s to 10.5Gb/s bit rates • Power dissipation <2.0W • Commercial temperature range: -5°C to 75°C • RoHS-6 Compliant lead-free • Hot-pluggable XFP footprint • Single power supply 3.3V • Maximum link length of 10km • Uncooled 1310nm DFB laser • Duplex LC connector • No Reference Clock required • Built-in digital diagnostic functions • Standard bail release mechanism • 10GBASE-LR/LW 10G Ethernet • 1200-SM-LL-L 10G Fibre Channe Finisar’s FTLX1412D3BCL Small Form Factor 10Gb/s XFP transceivers are compliant with the current XFP Multi-Source Agreement MSA Specification1. They comply with 10-Gigabit Ethernet 10GBASE-LR/LW per IEEE 802.3ae and 10G Fibre Channel 1200SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. If SONET/SDH compliance is required, please see Finisar Part Number FTLX1412M3BCL. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC3, and Finisar Application Note AN-20384. PRODUCT SELECTION FTLX1412D3BCL Finisar Corporation 14-September-07 FTLX1412D3BCL Datacom XFP Product Specification September 2007 Finisar I. Pin Descriptions Pin Logic Name/Description Ref. Module Ground VEE5 Optional Power Supply Not required 3 LVTTL-I Mod-Desel Module De-select When held low allows the module to respond to 2-wire serial interface commands 4 LVTTL-O Interrupt Interrupt bar Indicates presence of an important condition 2 which can be read over the serial 2-wire interface 5 LVTTL-I TX_DIS Transmitter Disable Transmitter laser source turned off VCC5 +5 Power Supply Not required Module Ground VCC3 +3.3V Power Supply VCC3 +3.3V Power Supply 10 LVTTL-I Serial 2-wire interface clock 11 LVTTL- Serial 2-wire interface data line 12 LVTTL-O Mod_Abs Module Absent Indicates module is not present. Grounded 2 in the module. 13 LVTTL-O Mod_NR Module Not Ready Finisar defines it as a logical OR between RX_LOS and Loss of Lock in TX/RX.

PDF Datasheet Preview

Finisar

Product Specification

RoHS-6 Compliant 10Gb/s 10km Datacom XFP Optical Transceiver

FTLX1412D3BCL

PRODUCT FEATURES
• Supports 9.95Gb/s to 10.5Gb/s bit rates
• Power dissipation <2.0W
• Commercial temperature range:
-5°C to 75°C
• RoHS-6 Compliant lead-free
• Hot-pluggable XFP footprint
• Single power supply 3.3V
• Maximum link length of 10km
• Uncooled 1310nm DFB laser
• Duplex LC connector
• No Reference Clock required
• Built-in digital diagnostic functions
• Standard bail release mechanism
• 10GBASE-LR/LW 10G Ethernet
• 1200-SM-LL-L 10G Fibre Channe

Finisar’s FTLX1412D3BCL Small Form Factor 10Gb/s XFP transceivers are compliant with the current XFP Multi-Source Agreement MSA Specification1. They comply with 10-Gigabit Ethernet 10GBASE-LR/LW per IEEE 802.3ae and 10G Fibre Channel 1200SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP MSA. If SONET/SDH compliance is required, please see Finisar Part Number FTLX1412M3BCL. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC3, and Finisar Application Note AN-20384.

PRODUCT SELECTION

FTLX1412D3BCL

Finisar Corporation 14-September-07

FTLX1412D3BCL Datacom XFP Product Specification September 2007

Finisar

I. Pin Descriptions

Pin Logic

Name/Description

Ref.

Module Ground

VEE5

Optional Power Supply Not required
3 LVTTL-I Mod-Desel Module De-select When held low allows the module to
respond to 2-wire serial interface commands
4 LVTTL-O

Interrupt

Interrupt bar Indicates presence of an important condition 2 which can be read over the serial 2-wire interface
5 LVTTL-I

TX_DIS Transmitter Disable Transmitter laser source turned off

VCC5 +5 Power Supply Not required

Module Ground

VCC3 +3.3V Power Supply

VCC3 +3.3V Power Supply
10 LVTTL-I

Serial 2-wire interface clock
11 LVTTL-

Serial 2-wire interface data line
12 LVTTL-O Mod_Abs Module Absent Indicates module is not present. Grounded 2
in the module.
13 LVTTL-O Mod_NR Module Not Ready Finisar defines it as a logical OR
between RX_LOS and Loss of Lock in TX/RX.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FTLX1412D3BCL Datasheet file may be downloaded here without warranties.

Datasheet ID: FTLX1412D3BCL 635221