ICS853310AVLFT
ICS853310AVLFT Datasheet
ICS853310
| Part | Datasheet |
|---|---|
ICS853310AVLFT |
ICS853310AVLFT (pdf) |
| Related Parts | Information |
|---|---|
|
ICS853310AVLF |
ICS853310AVLF |
| PDF Datasheet Preview |
|---|
| Integrated Circuit Systems, Inc. ICS853310 LOW SKEW, 1-TO-8 DIFFERENTIAL-TO-3.3V LVPECL/ECL FANOUT BUFFER The ICS853310 is a low skew, high perfor- mance 1-to-8 Differential-to-3.3V LVPECL/ECL HiPerClockS Fa n o u t B u f e r a n d a m e m b e r o f t h e HiPerClockS family of High Performance Clock Solutions from ICS. The PCLKx, nPCLKx pairs can accept LVPECL, LVDS, CML and SSTL differential input levels.The ICS853310 is characterized to operate from a 3.3V power supply. Guaranteed output and part-to-part skew characteristics make the ICS853310 ideal for those clock distribution applications demanding well defined per- formance and repeatability. • Eight differential 3.3V LVPECL / ECL outputs • Two selectable differential LVPECL input pairs • PCLKx, nPCLKx pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL • Output frequency >2GHz typical • Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nPCLKx input • Output skew 50ps maximum • Part-to-part skew 200ps maximum • Propagation delay 900ps maximum • LVPECL mode operating voltage supply range VCC = 3V to 3.8V, VEE = 0V • ECL mode operating voltage supply range: V = 0V, V = -3V to -3.8V • -40°C to 85°C ambient operating temperature • Available in both standard and lead-free RoHS-compliant packages BLOCK DIAGRAM PCLK0 nPCLK0 PCLK1 nPCLK1 CLK_SEL PIN ASSIGNMENT nQ2 Q2 nQ1 VCCO Q1 nQ0 Q0 nQ0 Q1 nQ1 Q2 nQ2 VEE CLK_SEL 25 24 23 22 21 20 19 TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature 853310AV ICS853310AV 28 Lead PLCC Tube -40°C to 85°C 853310AVT ICS853310AV 28 Lead PLCC on Tape and Reel 500 Tape & Reel -40°C to 85°C 853310AVLF ICS853310AVL 28 Lead "Lead-Free" PLCC Tube -40°C to 85°C 853310AVLFT ICS853310AVL 28 Lead "Lead-Free" PLCC 500 Tape & Reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. The aforementioned trademark, HiPerClockS is a trademark of Integrated Circuit Systems, Inc. or its subsidiaries in the United States and/or other countries. While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated ICS assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. 853310AV Integrated Circuit Systems, Inc. ICS853310 LOW SKEW, 1-TO-8 DIFFERENTIAL-TO-3.3V LVPECL/ECL FANOUT BUFFER Page 1 8 15 Description of Change Add Lead-Free bullet. Corrected Pin Assignment pin number spacing. Added Recommendations for Unused Input and Output Pins. Ordering Information Table - added Lead-Free Part Number. Ordering Information Table - added Lead-Free marking. Date 9/14/05 11/22/05 853310AV |
| More datasheets: MD6030NSZ-0 | MC14467P1 | DEM-9P-NMK52 | 76650-0211 | DX07S024XJ1R1100 | DCMZ-27X2S-N-A197 | MDM-15PSK | DCMM13W6SA197 | FD600R12KF4NOSA1 | ICS853310AVLF |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS853310AVLFT Datasheet file may be downloaded here without warranties.