TPIS 1T 1086 L5.5

TPIS 1T 1086 L5.5 Datasheet

TPiS 1T 1086 L5.5 / 7452

Part	Datasheet
TPIS 1T 1086 L5.5	TPIS 1T 1086 L5.5 (pdf)

PDF Datasheet Preview
CaliPile Infrared Sensing TPiS 1T 1086 L5.5 / 7452 Product The TPiS 1T 1086 L5.5 is a thermopile sensor with integrated signal processing. It provides as a member of the CaliPile family factory calibration data stored in the sensors EEPROM. It features a of view in an isothermal TO-39 package which ensure fast adaptation to ambient temperature changes. The technology of a high sensitive thermopile combined with a smart data treatment allows for much more than the traditional temperature measurement of remote objects. Once via the I2C interface an interrupt output can be used to monitor motion, presence or an over-temperature of remote objects. One typical application is a remote object temperature monitoring with the feature of a fast over-temperature security switch. The temperature calculation is performed on the host based on the calibration parameters but the over-temperature recognition is constantly monitored by the sensor it-self. • Isothermal TO-39 package • High sensitivity thermopile with • Integrated 50 µW low-power sig- nal processing • I2C interface, hardware- address • Calibration data for ambient and object temperature sensing • Interrupt function for presence, motion, over-temperature and more • Optimal for remote temperature measurement • Fast remote over-temperature protection • human presence sensing • human motion detec- tion Contents 1 Dimensions and Connections 2 Optical Characteristics 3 Absolute Maximum Ratings 4 Device Characteristics 5 I2C Interface Characteristics START and STOP conditions 8 Clock low extension 9 Slave Address 9 Protocol diagram description 9 General Call 9 Reading Data from the Register 10 Writing Data to Register 10 Reading EEPROM 11 6 Data processing characteristics Control and Status Registers 12 Control Register Details 13 7 Internal processing overview The contents of this document are subject to change without notice and customers should consult with Excelitas Technologies sales representatives before ordering. Customers considering the use of Excelitas Technologies thermopile devices in applications where failure may cause personal injury or property damage, or where extremely high levels of reliability are demanded, are requested to discuss their concerns with Excelitas Technologies sales representatives before such use. The Company’s responsibility for damages will be limited to the repair or replacement of defective product. As with any semiconductor device, thermopile sensors or modules have a certain inherent rate of failure. To protect against injury, damage or loss from such failures, customers are advised to incorporate appropriate safety design measures into their product. Copyright This document and the product to which it relates are protected by copyright law from unauthorized reproduction. Notice to U.S. Government End Users The Software and Documentation are "Commercial Items", as that term is at 48 C.F.R. consisting of "Commercial Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. or 48 C.F.R. as applicable. Consistent with 48 C.F.R. or 48 C.F.R. through as applicable, the Commercial Computer Software and Commercial Computer Software Documentation are being licensed to the U.S. Government end users a only as Commercial Items and b with only those rights as are granted to all other end users pursuant to the terms and conditions herein. Unpublished rights reserved under the copyright laws of the United States. Excelitas Technologies GmbH & Co. KG Wenzel-Jaksch-Str. 31 65199 Wiesbaden Germany Tel. +49 0 611 492 0 Fax. +49 0 611 492 177

PDF Datasheet Preview

CaliPile

Infrared Sensing

TPiS 1T 1086 L5.5 / 7452

Product

The TPiS 1T 1086 L5.5 is a thermopile sensor with integrated signal processing.

It provides as a member of the CaliPile family factory calibration data stored in the sensors EEPROM. It features a of view in an isothermal TO-39 package which ensure fast adaptation to ambient temperature changes. The technology of a high sensitive thermopile combined with a smart data treatment allows for much more than the traditional temperature measurement of remote objects. Once via the I2C interface an interrupt output can be used to monitor motion, presence or an over-temperature of remote objects. One typical application is a remote object temperature monitoring with the feature of a fast over-temperature security switch. The temperature calculation is performed on the host based on the calibration parameters but the over-temperature recognition is constantly monitored by the sensor it-self.
• Isothermal TO-39 package
• High sensitivity thermopile with
• Integrated 50 µW low-power sig-
nal processing
• I2C interface, hardware-
address
• Calibration data for ambient and
object temperature sensing
• Interrupt function for presence,
motion, over-temperature and more
• Optimal for remote temperature
measurement
• Fast remote over-temperature
protection
• human presence
sensing
• human motion detec-
tion

Contents
1 Dimensions and Connections
2 Optical Characteristics
3 Absolute Maximum Ratings
4 Device Characteristics
5 I2C Interface Characteristics

START and STOP conditions 8

Clock low extension 9

Slave Address 9

Protocol diagram description 9

General Call 9

Reading Data from the Register 10

Writing Data to Register 10

Reading EEPROM 11
6 Data processing characteristics

Control and Status Registers 12

Control Register Details 13
7 Internal processing overview
The contents of this document are subject to change without notice and customers should consult with Excelitas Technologies sales representatives before ordering. Customers considering the use of Excelitas Technologies thermopile devices in applications where failure may cause personal injury or property damage, or where extremely high levels of reliability are demanded, are requested to discuss their concerns with Excelitas Technologies sales representatives before such use. The Company’s responsibility for damages will be limited to the repair or replacement of defective product. As with any semiconductor device, thermopile sensors or modules have a certain inherent rate of failure. To protect against injury, damage or loss from such failures, customers are advised to incorporate appropriate safety design measures into their product.

Copyright

This document and the product to which it relates are protected by copyright law from unauthorized reproduction. Notice to U.S. Government End Users The Software and Documentation are "Commercial Items", as that term is at 48 C.F.R. consisting of "Commercial Computer Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. or 48 C.F.R. as applicable. Consistent with 48 C.F.R. or 48 C.F.R. through as applicable, the Commercial Computer Software and Commercial Computer Software Documentation are being licensed to the U.S. Government end users a only as Commercial Items and b with only those rights as are granted to all other end users pursuant to the terms and conditions herein. Unpublished rights reserved under the copyright laws of the United States.

Excelitas Technologies GmbH & Co. KG Wenzel-Jaksch-Str. 31 65199 Wiesbaden Germany Tel. +49 0 611 492 0 Fax. +49 0 611 492 177

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TPIS 1T 1086 L5.5 Datasheet file may be downloaded here without warranties.

Datasheet ID: TPIS 1T 1086 L5.5 512950