AS7261N-BLGT

AS7261N-BLGT Datasheet

AS7261

Part	Datasheet
AS7261N-BLGT	AS7261N-BLGT (pdf)

Related Parts	Information
AS7261-BLGT	AS7261-BLGT
AS7261 DEMO KIT	AS7261 DEMO KIT

PDF Datasheet Preview
AS7261 XYZ Chromatic White Color Sensor + NIR with Electronic Shutter and Smart Interface The AS7261is a chromatic white color sensor providing direct XYZ color coordinates consistent with the CIE 1931 2° Standard Observer color coordinates. It also maps the XYZ coordinates to the x, y of the 2-dimensional color gamut and scales the coordinates to the CIE 1976 u’v’ coordinate system. The device provides accurate Correlated Color Temperature CCT measurements and provides color point deviation from the black body curve for white light color in the delta u’ v’ coordinate system. It also integrates a Near-IR channel for other applications. LED drivers with programmable currents are provided for electronic shutter applications. The AS7261 integrates Gaussian filters into standard CMOS silicon via Nano-optic deposited interference filter technology and is packaged in an LGA package that provides a built in aperture to control the light entering the sensor array. Control and spectral data access is implemented through either the register set, or with a high level AT Spectral Command set via a serial UART. Ordering Information and Content Guide appear at end of datasheet. Figure 1 AS7261 Benefits and Features Key Benefits & Features The benefits and features of AS7261, XYZ Chromatic White Color Sensor + NIR with Electronic Shutter and Smart Interface are listed below: • Calibrated Chromatic white data • XYZ • xy data CIE 1931 • DUV, u’v’, uv CIE 1976 • CCT, LUX • Simple text-based command interface via UART, or direct register read and write with interrupt on sensor ready option on • Lifetime-calibrated sensing with minimal drift over time or temperature • UART or slave digital Interface • Filter set realized by silicon interference filters • No additional signal conditioning required • 16-bit ADC with digital access ams Datasheet [v1-00] 2016-Dec-30 Page 1 Document Feedback AS7261 − General Description • Electronic shutter control/synchronization • Low voltage operation • Small, robust package, with built-in aperture • Programmable LED drivers • 2.7V to 3.6V with interface • 20-pin LGA package 4.5mm x 4.7mm x 2.5mm • -40°C to 85°C temperature range The AS7261 applications include • Color measurement and absorbance • Color matching and identification • Precision color tuning/calibration Block Diagram The functional blocks of this device are shown below: Figure 2 AS7261 Chromatic White Color System 100nF 3.3V 10uF Flash Memory VDD1 VDD2 RX / SCL_S TX / SDA_S LED_IND LED_DRV AS7261 MOSI MISO SCK CSN_EE XYZ, NIR, C&D Senso rs 3.3V 3.3V Light in Light Source Reflective Surface Page 2 Document Feedback ams Datasheet [v1-00] 2016-Dec-30 AS7261 − Pin Assignments Pin Assignments Figure 3 AS7261 Pin Diagram Top View The device pin assignments are described below. AS7261 − Ordering & Contact Information Ordering & Contact Information Figure 40 Ordering Information Ordering Code Package Marking AS7261-BLGT 20-pin LGA AS7261 XYZ Chromatic White Color Sensor + NIR with Electronic Shutter and Smart Interface Delivery Form Tape & Reel Delivery Quantity 2000 pcs/reel Note s Required companion serial flash memory must be ams verified is ordered from the flash memory supplier e.g. AT25SF041-SSHD-B from Adesto Technologies AS7261 flash memory software is available from ams Buy our products or get free samples online at Technical Support is available at Provide feedback about this document at For further information and requests, e-mail us at For sales offices, distributors and representatives, please visit: Headquarters ams AG Tobelbader Strasse 30 8141 Premstaetten Austria, Europe Tel +43 0 3136 500 0 Website: ams Datasheet [v1-00] 2016-Dec-30 Page 41 Document Feedback AS7261 − RoHS Compliant & ams Green Statement RoHS Compliant & ams Green Statement RoHS The term RoHS compliant means that ams AG products fully comply with current RoHS directives. Our semiconductor products do not contain any chemicals for all 6 substance categories, including the requirement that lead not exceed by weight in homogeneous materials. Where designed to be soldered at high temperatures, RoHS compliant products are suitable for use in specified lead-free processes. ams Green RoHS compliant and no Sb/Br ams Green defines that in addition to RoHS compliance, our products are free of Bromine Br and Antimony Sb based flame retardants Br or Sb do not exceed by weight in homogeneous material . Important Information The information provided in this statement represents ams AG knowledge and belief as of the date that it is provided. ams AG bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. ams AG has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ams AG and ams AG suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Page 42 Document Feedback ams Datasheet [v1-00] 2016-Dec-30 AS7261 − Copyrights & Disclaimer Copyrights & Disclaimer Copyright ams AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. Devices sold by ams AG are covered by the warranty and patent indemnification provisions appearing in its General Terms of Trade. ams AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein. ams AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with ams AG for current information. This product is intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by ams AG for each application. This product is provided by ams AG “AS IS” and any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed. ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services. ams Datasheet [v1-00] 2016-Dec-30 Page 43 Document Feedback Document Status AS7261 − Document Status Document Status Product Status Definition Product Preview Pre-Development Information in this datasheet is based on product ideas in the planning phase of development. All specifications are design goals without any warranty and are subject to change without notice Preliminary Datasheet Pre-Production Information in this datasheet is based on products in the design, validation or qualification phase of development. The performance and parameters shown in this document are preliminary without any warranty and are subject to change without notice Datasheet ams Datasheet [v1-00] 2016-Dec-30 Page 47 Document Feedback

PDF Datasheet Preview

AS7261

XYZ Chromatic White Color Sensor + NIR with Electronic Shutter and Smart Interface

The AS7261is a chromatic white color sensor providing direct XYZ color coordinates consistent with the CIE 1931 2° Standard Observer color coordinates. It also maps the XYZ coordinates to the x, y of the 2-dimensional color gamut and scales the coordinates to the CIE 1976 u’v’ coordinate system.

The device provides accurate Correlated Color Temperature CCT measurements and provides color point deviation from the black body curve for white light color in the delta u’ v’ coordinate system. It also integrates a Near-IR channel for other applications. LED drivers with programmable currents are provided for electronic shutter applications.

The AS7261 integrates Gaussian filters into standard CMOS silicon via Nano-optic deposited interference filter technology and is packaged in an LGA package that provides a built in aperture to control the light entering the sensor array.

Control and spectral data access is implemented through either the register set, or with a high level AT Spectral Command set via a serial UART.
Ordering Information and Content Guide appear at end of datasheet.

Figure 1 AS7261 Benefits and Features

Key Benefits & Features

The benefits and features of AS7261, XYZ Chromatic White Color Sensor + NIR with Electronic Shutter and Smart Interface are listed below:
• Calibrated Chromatic white data
• XYZ
• xy data CIE 1931
• DUV, u’v’, uv CIE 1976
• CCT, LUX
• Simple text-based command interface via UART, or direct register read and write with interrupt on sensor ready option on
• Lifetime-calibrated sensing with minimal drift over time or temperature
• UART or slave digital Interface
• Filter set realized by silicon interference filters
• No additional signal conditioning required
• 16-bit ADC with digital access
ams Datasheet [v1-00] 2016-Dec-30

Page 1 Document Feedback

AS7261 − General Description
• Electronic shutter control/synchronization
• Low voltage operation
• Small, robust package, with built-in aperture
• Programmable LED drivers
• 2.7V to 3.6V with interface
• 20-pin LGA package 4.5mm x 4.7mm x 2.5mm
• -40°C to 85°C temperature range

The AS7261 applications include
• Color measurement and absorbance
• Color matching and identification
• Precision color tuning/calibration

Block Diagram

The functional blocks of this device are shown below:

Figure 2 AS7261 Chromatic White Color System
100nF
3.3V 10uF

Flash Memory

VDD1 VDD2 RX / SCL_S

TX / SDA_S

LED_IND

LED_DRV

AS7261

MOSI MISO SCK CSN_EE

XYZ, NIR, C&D Senso rs
3.3V 3.3V

Light in

Light Source

Reflective Surface

Page 2 Document Feedback
ams Datasheet [v1-00] 2016-Dec-30

AS7261 − Pin Assignments

Pin Assignments

Figure 3 AS7261 Pin Diagram Top View

The device pin assignments are described below.
AS7261 − Ordering & Contact Information
Ordering & Contact Information
Figure 40 Ordering Information
Ordering Code

Package Marking

AS7261-BLGT 20-pin LGA

AS7261

XYZ Chromatic White Color Sensor + NIR with Electronic Shutter and Smart Interface

Delivery Form

Tape & Reel

Delivery Quantity
2000 pcs/reel

Note s Required companion serial flash memory must be ams verified is ordered from the flash memory supplier e.g. AT25SF041-SSHD-B
from Adesto Technologies AS7261 flash memory software is available from ams

Buy our products or get free samples online at Technical Support is available at Provide feedback about this document at For further information and requests, e-mail us at For sales offices, distributors and representatives, please visit:

Headquarters ams AG Tobelbader Strasse 30 8141 Premstaetten Austria, Europe

Tel +43 0 3136 500 0 Website:
ams Datasheet [v1-00] 2016-Dec-30

Page 41 Document Feedback

AS7261 − RoHS Compliant & ams Green Statement

RoHS Compliant & ams Green Statement

RoHS The term RoHS compliant means that ams AG products fully comply with current RoHS directives. Our semiconductor products do not contain any chemicals for all 6 substance categories, including the requirement that lead not exceed by weight in homogeneous materials. Where designed to be soldered at high temperatures, RoHS compliant products are suitable for use in specified lead-free processes.
ams Green RoHS compliant and no Sb/Br ams Green defines that in addition to RoHS compliance, our products are free of Bromine Br and Antimony Sb based flame retardants Br or Sb do not exceed by weight in homogeneous material .

Important Information The information provided in this statement represents ams AG knowledge and belief as of the date that it is provided. ams AG bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. ams AG has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ams AG and ams AG suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

Page 42 Document Feedback
ams Datasheet [v1-00] 2016-Dec-30

AS7261 − Copyrights & Disclaimer

Copyrights & Disclaimer

Copyright ams AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.

Devices sold by ams AG are covered by the warranty and patent indemnification provisions appearing in its General Terms of Trade. ams AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein. ams AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with ams AG for current information. This product is intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by ams AG for each application. This product is provided by ams AG “AS IS” and any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed.
ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services.
ams Datasheet [v1-00] 2016-Dec-30

Page 43 Document Feedback

Document Status

AS7261 − Document Status

Document Status Product Status

Definition

Product Preview

Pre-Development

Information in this datasheet is based on product ideas in the planning phase of development. All specifications are design goals without any warranty and are subject to change without notice

Preliminary Datasheet

Pre-Production

Information in this datasheet is based on products in the design, validation or qualification phase of development. The performance and parameters shown in this document are preliminary without any warranty and are subject to change without notice

Datasheet
ams Datasheet [v1-00] 2016-Dec-30

Page 47 Document Feedback

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS7261N-BLGT Datasheet file may be downloaded here without warranties.

Datasheet ID: AS7261N-BLGT 519763