S5U13T04P00C100
S5U13T04P00C100 Datasheet
S5U13T04P00C100 Evaluation Board User Manual
| Part | Datasheet |
|---|---|
S5U13T04P00C100 |
S5U13T04P00C100 (pdf) |
| PDF Datasheet Preview |
|---|
| S5U13T04P00C100 Evaluation Board User Manual Document Number XA3A-G-001-00 SEIKO EPSON CORPORATION Evaluation board/kit and Development tool important notice This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purpose. It is not intended to meet the requirement of design for finished product. This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is not a consumer product. The user should use these goods properly and safely. Seiko Epson dose not assume any responsibility and liability of any kind of damage and/or fire caused by usage of it. The user should cease to use it when any abnormal issue occurs, even during proper and safe use. The parts used for this evaluation board/kit or development tool may change without notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2013, All rights reserved. Seiko Epson Corporation XA3A-G-001-00 Issue Date 2013/03/15 Table of Contents 1 Introduction 4 2 Features 5 3 Setup and Configuration 6 4 Connectors 7 J1 Panel Interface Connector 8 J2 Power 8 J3 Host Interface Connector 9 J4 Production Test Connector 9 5 Parts 6 Schematic 7 References 8 Change XA3A-G-001-00 Issue Date 2013/03/15 Seiko Epson Corporation 1 Introduction Seiko Epson Corporation XA3A-G-001-00 Issue Date 2013/03/15 2 Features The S5U13T04P00C100 reference board includes the following features • Supports SPI host interface • Epson’s S1D13T04 EPD Timing Controller. • Power connector • Panel Interface connector. • inch EPD panel. Page 5 XA3A-G-001-00 Issue Date 2013/03/15 Seiko Epson Corporation Page 6 3 Setup and Configuration The main functional blocks of the evaluation board are shown below. SVT13T04 board J3 Reserved For Testing Host S1D13T04 Power HVDD RVDD CNF0 JP3/JP4 Panel I/F Inch EPD Panel |
| More datasheets: 2322 661 91066 | 2322 662 93074 | 2322 662 93129 | SEN0116 | DRH-120-24 | FMS6419MSA28 | FMS6419MSA28X | LS15RB2401J04 | LF-E-100 | FMG1G50US60L |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S5U13T04P00C100 Datasheet file may be downloaded here without warranties.