DRH-120-24
Part | Datasheet |
---|---|
![]() |
DRH-120-24 (pdf) |
PDF Datasheet Preview |
---|
D R H - 1 2 0 120W Single Output Industrial DIN RAIL Power Supply series Features : Protections Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 EN61000-6-2 EN50082-2 industrial immunity level 100% full load burn-in test Fixed switching frequency at 70KHz 3 years warranty SPECIFICATION MODEL DRH-120-24 DRH-120-48 DC VOLTAGE RATED CURRENT 2.5A CURRENT RANGE 0 ~ 5A 0 ~2.5A RATED POWER 120W 120W OUTPUT RIPPLE & NOISE max. Note.2 80mVp-p VOLTAGE ADJ. RANGE 24 ~ 28V VOLTAGE TOLERANCE Note.3 LINE REGULATION 80mVp-p 48 ~ 55V LOAD REGULATION SETUP, RISE, HOLD UP TIME 1700ms, 120ms, 16ms/400VAC 1000ms, 120ms, 30ms/500VAC at full load VOLTAGE RANGE 340 ~ 550VAC 480 ~ 780VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY Typ. INPUT AC CURRENT 0.65A/400VAC 0.6A/500VAC INRUSH CURRENT max. COLD START 50A LEAKAGE CURRENT <3.5mA / 530VAC OVERLOAD PROTECTION OVER VOLTAGE 105 ~ 160% rated output power Protection type Constant current limiting, recovers automatically after fault condition is removed 30 ~ 36V |
More datasheets: CY2292F | 6003-410-008 | 48-213/T7D-BQ1R2QY/3C | S3444-O-M | HMT25E-F4-SS-7X5-A1-CW-SM18-S | 2322 662 93114 | 2322 661 91066 | 2322 662 93074 | 2322 662 93129 | SEN0116 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DRH-120-24 Datasheet file may be downloaded here without warranties.