6003-410-008

6003-410-008 Datasheet

Virtex-5 OpenSPARC FPGA Development Board ML509 RETIRED SKU 6003-410-008-RET

Part	Datasheet
6003-410-008	6003-410-008 (pdf)

PDF Datasheet Preview
Xilinx Virtex-5 OpenSPARC FPGA Development Board ML509 RETIRED SKU 6003-410-008-RET Product Description The OpenSPARC Evaluation Platform is a powerful system for hosting the OpenSPARC T1 open-source microprocessor. Equivalent to the ML509 board and based on the Xilinx XUPV5-LX110T FPGA, this kit brings the throughput of OpenSPARC Chip Multi-Threading to an FPGA. OpenSPARC T1 is the open-sourced version of the custom designed UltraSPARC T1 microprocesor from Sun Microsystems. To broaden the appeal of this state-of-the-art Chip Multi-threading CMT technology to the developers, engineers at Sun Microsystems and Xilinx Inc. have developed a reference design that allows a scaled-down version of the OpenSPARC T1 processor to run on Xilinx Virtex-5 FPGAs. This reference design is an excellent starting point for researchers and entrepreneurs to build and test novel ideas in the areas of computer architecture, logic design, parallel programming, and compiler techniques, among others. For more details on how to download the OpenSPARC design and the reference design, please visit Kit Includes: • XUPV5-LX110T board • 1GB Compact Flash card • 256 MB SODIMM module • SATA cable • XUP USB-JTAG Programming Cable • DVI to VGA adapter • 4A power supply Note: For documentation and reference designs, please visit For more information and to learn more about bringing Sun's OpenSPARC program to your university, please visit For reference projects, design resources, and the most up-to-date documentation, please visit the Virtex-5 OpenSPARC Evaluation Platform Resource Center. Stats: Processor/IC Xilinx Virtex-5 XC5VLX110T FPGA Connector s : • USB 2 Host and Peripheral • PS/2 Keyboard, Mouse • RJ-45 10/100/1000 Networking • RS-232 Male Serial port • Audio In 2 Line, Microphone • Audio Out 2 Line, Amp, SPDIF • Video Input • Video DVI/VGA Output • Single-Ended and Differential I/O Expansion Programming JTAG Programming Interface Features: • Xilinx Virtex-5 XC5VLX110T FPGA • Two Xilinx XCF32P Platform Flash PROMs 32 Mbyte each for storing large device configurations • Xilinx SystemACE Compact Flash configuration controller • 64-bit wide 256Mbyte DDR2 small outline DIMM SODIMM module compatible with EDK supported IP and software drivers • On-board 32-bit ZBT synchronous SRAM and P30 StrataFlash • 10/100/1000 tri-speed Ethernet PHY supporting MII, GMII, RGMII, and SGMII interfaces • USB host and peripheral controllers • Programmable system clock generator • Stereo AC97 codec with line in, line out, headphone, microphone, and SPDIF digital audio jacks • RS-232 port, 16x2 character LCD, and many other I/O devices and ports

PDF Datasheet Preview

Xilinx

Virtex-5 OpenSPARC FPGA Development Board ML509 RETIRED SKU 6003-410-008-RET

Product Description

The OpenSPARC Evaluation Platform is a powerful system for hosting the OpenSPARC T1 open-source microprocessor. Equivalent to the ML509 board and based on the Xilinx XUPV5-LX110T FPGA, this kit brings the throughput of OpenSPARC Chip Multi-Threading to an FPGA. OpenSPARC T1 is the open-sourced version of the custom designed UltraSPARC T1 microprocesor from Sun Microsystems. To broaden the appeal of this state-of-the-art Chip Multi-threading CMT technology to the developers, engineers at Sun Microsystems and Xilinx Inc. have developed a reference design that allows a scaled-down version of the OpenSPARC T1 processor to run on Xilinx Virtex-5 FPGAs. This reference design is an excellent starting point for researchers and entrepreneurs to build and test novel ideas in the areas of computer architecture, logic design, parallel programming, and compiler techniques, among others. For more details on how to download the OpenSPARC design and the reference design, please visit

Kit Includes:
• XUPV5-LX110T board
• 1GB Compact Flash card
• 256 MB SODIMM module
• SATA cable
• XUP USB-JTAG Programming Cable
• DVI to VGA adapter
• 4A power supply

Note:

For documentation and reference designs, please visit

For more information and to learn more about bringing Sun's OpenSPARC program to your university, please visit For reference projects, design resources, and the most up-to-date documentation, please visit the Virtex-5 OpenSPARC Evaluation Platform Resource Center.

Stats:

Processor/IC Xilinx Virtex-5 XC5VLX110T FPGA

Connector s :
• USB 2 Host and Peripheral
• PS/2 Keyboard, Mouse
• RJ-45 10/100/1000 Networking
• RS-232 Male Serial port
• Audio In 2 Line, Microphone
• Audio Out 2 Line, Amp, SPDIF
• Video Input
• Video DVI/VGA Output
• Single-Ended and Differential I/O Expansion

Programming JTAG Programming Interface

Features:
• Xilinx Virtex-5 XC5VLX110T FPGA
• Two Xilinx XCF32P Platform Flash PROMs 32 Mbyte each for storing large device configurations
• Xilinx SystemACE Compact Flash configuration controller
• 64-bit wide 256Mbyte DDR2 small outline DIMM SODIMM module compatible with EDK
supported IP and software drivers
• On-board 32-bit ZBT synchronous SRAM and P30 StrataFlash
• 10/100/1000 tri-speed Ethernet PHY supporting MII, GMII, RGMII, and SGMII interfaces
• USB host and peripheral controllers
• Programmable system clock generator
• Stereo AC97 codec with line in, line out, headphone, microphone, and SPDIF digital audio jacks
• RS-232 port, 16x2 character LCD, and many other I/O devices and ports

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 6003-410-008 Datasheet file may be downloaded here without warranties.

Datasheet ID: 6003-410-008 509749