S5U13781R00C10M

S5U13781R00C10M Datasheet

S5U13781R00C10M User Manual

Part	Datasheet
S5U13781R00C10M	S5U13781R00C10M (pdf)

PDF Datasheet Preview
S5U13781R00C10M User Manual Issue Date 2012/09/25 SEIKO EPSON CORPORATION Evaluation board/kit and Development tool important notice This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purpose. It is not intended to meet the requirement of design for finished product. This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is not a consumer product. The user should use these goods properly and safely. Seiko Epson dose not assume any responsibility and liability of any kind of damage and/or fire caused by usage of it. The user should cease to use it when any abnormal issue occurs, even during proper and safe use. The parts used for this evaluation board/kit or development tool may change without notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2012, All rights reserved. Seiko Epson Corporation X94A-G-008-01 Issue Date 2012/09/25 Table of Contents 1 Introduction 4 2 LCD Module Options and Parts Lists 6 3 Connecting the 7 4 StellarisWare Drivers and Demo Software Requirements 10 Hardware Requirements 10 Software 10 Software Installation 10 Software Description 12 Driver 12 Demonstration 13 Software Modification 13 Software 13 5 Stellaris LM4F120 Launchpad Connections 6 Pinout for 40-Pin LCD Interface 7 Pinout for 54-Pin LCD Interface 8 S5U13781M00C100 Schematics 9 S5U13781M00C100 Board 10 References 11 Change X94A-G-008-01 Issue Date 2012/09/25 Seiko Epson Corporation 1 Introduction The S5U13781R00C10M is the S1D13781 BoosterPack LCDC Development Package. It is a BoosterPack board set for TI’s Stellaris LM4F120 Launchpad for evaluating and developing embedded LCD display applications using the Epson S1D13781 LCD Controller IC. The S5U13781R00C10M consists of the following two items: • S5U13781R00C100 Reference Board Set • S5U13781M00C100 Signal Adapter Board Set Figure 1 shows a picture of the S5U13781R00C100 Reference Board Set. Figure 1 S5U13781R00C100 Reference Board Set The S5U13781R00C100 Reference Board Set consists of two break-off sub-boards: • Main board which has the S1D13781 LCD Controller, 2Mbytes of Serial Flash, DC/DC converter for LED backlight, 2x25 connector for Host interface J4 , and 2x25 connector for LCD interface J5 . • LCD interface board which has a 54-pin FPC flexible printed circuit connector J8 to connect to LCD module and 0.1”-pitch 2x25+2x6 connectors J9 and J10 . For more information about the S5U13781R00C100, please refer to the “S5U13781R00C100 Reference Board User Manual”, document number X94A-G-004-01 Seiko Epson Corporation X94A-G-008-01 Issue Date 2012/09/25 Figure 2 shows a picture of the S5U13781M00C100 Signal Adapter Board Set. Page 5 Figure 2 S5U13781M00C100 Signal Adapter Board Set The S5U13781M00C100 Signal Adapter Board Set is a supplement to the S5U13781R00C100 Reference Board Set and it consists of three break-off sub-boards schematics and layout are in Sections 8 and 9 : • “Board A Host Interface Adapter” is used to adapt the S5U13781R00C100 Main Board’s Host Interface signals P5 to the Stellaris LM4F120 Launchpad BoosterPack connectors P1 to P4 , and it also routes the S5U13781R00C100 Main Boards’ LCD Interface signals P9 to a connector J2 for connecting to either “Board B LCD Signal Adapter 40Pin” or “Board C LCD Signal Adapter 54Pin”. • “Board B LCD Signal Adapter 40Pin” provides signal routing for connecting to an LCD module with a 40-pin FPC WQVGA . One side PB1 connects to J2 of Board A and the other side PB2 connects to J9 of the S5U13781R00C100 LCD interface board. • “Board C LCD Signal Adapter 54Pin” provides signal routing for connecting to an LCD module with a 54-pin FPC QVGA . One side PC1 connects to J2 of Board A and the other side PC2+PC3 connects to J9+J10 of the S5U13781R00C100 LCD interface board. We appreciate your comments on our documentation. Please contact us via email at X94A-G-008-01 Issue Date 2012/09/25

PDF Datasheet Preview

S5U13781R00C10M User Manual

Issue Date 2012/09/25

SEIKO EPSON CORPORATION

Evaluation board/kit and Development tool important notice

This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purpose. It is not intended to meet the requirement of design for finished product.

This evaluation board/kit or development tool is intended for use by an electronics engineer, and it is not a consumer product. The user should use these goods properly and safely. Seiko Epson dose not assume any responsibility and liability of any kind of damage and/or fire caused by usage of it. The user should cease to use it when any abnormal issue occurs, even during proper and safe use.

The parts used for this evaluation board/kit or development tool may change without notice.

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency.

All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

SEIKO EPSON CORPORATION 2012, All rights reserved.

Seiko Epson Corporation

X94A-G-008-01 Issue Date 2012/09/25

Table of Contents
1 Introduction 4 2 LCD Module Options and Parts Lists 6 3 Connecting the 7 4 StellarisWare Drivers and Demo Software

Requirements 10 Hardware Requirements 10 Software 10

Software Installation 10 Software Description 12

Driver 12 Demonstration 13 Software Modification 13 Software 13
5 Stellaris LM4F120 Launchpad Connections 6 Pinout for 40-Pin LCD Interface 7 Pinout for 54-Pin LCD Interface 8 S5U13781M00C100 Schematics 9 S5U13781M00C100 Board 10 References 11 Change

X94A-G-008-01 Issue Date 2012/09/25

Seiko Epson Corporation
1 Introduction

The S5U13781R00C10M is the S1D13781 BoosterPack LCDC Development Package. It is a BoosterPack board set for TI’s Stellaris LM4F120 Launchpad for evaluating and developing embedded LCD display applications using the Epson S1D13781 LCD Controller IC. The S5U13781R00C10M consists of the following two items:
• S5U13781R00C100 Reference Board Set
• S5U13781M00C100 Signal Adapter Board Set

Figure 1 shows a picture of the S5U13781R00C100 Reference Board Set.

Figure 1 S5U13781R00C100 Reference Board Set

The S5U13781R00C100 Reference Board Set consists of two break-off sub-boards:
• Main board which has the S1D13781 LCD Controller, 2Mbytes of Serial Flash, DC/DC converter for LED backlight, 2x25 connector for Host interface J4 , and 2x25 connector for LCD interface J5 .
• LCD interface board which has a 54-pin FPC flexible printed circuit connector J8 to connect to LCD module and 0.1”-pitch 2x25+2x6 connectors J9 and J10 .

For more information about the S5U13781R00C100, please refer to the “S5U13781R00C100 Reference Board User Manual”, document number X94A-G-004-01

Seiko Epson Corporation

X94A-G-008-01 Issue Date 2012/09/25

Figure 2 shows a picture of the S5U13781M00C100 Signal Adapter Board Set.

Page 5

Figure 2 S5U13781M00C100 Signal Adapter Board Set

The S5U13781M00C100 Signal Adapter Board Set is a supplement to the S5U13781R00C100 Reference Board Set and it consists of three break-off sub-boards schematics and layout are in Sections 8 and 9 :
• “Board A Host Interface Adapter” is used to adapt the S5U13781R00C100 Main Board’s Host Interface signals P5 to the Stellaris LM4F120 Launchpad BoosterPack connectors P1 to P4 , and it also routes the S5U13781R00C100 Main Boards’ LCD Interface signals P9 to a connector J2 for connecting to either “Board B LCD Signal Adapter 40Pin” or “Board C LCD Signal Adapter 54Pin”.
• “Board B LCD Signal Adapter 40Pin” provides signal routing for connecting to an LCD module with a 40-pin FPC WQVGA . One side PB1 connects to J2 of Board A and the other side PB2 connects to J9 of the S5U13781R00C100 LCD interface board.
• “Board C LCD Signal Adapter 54Pin” provides signal routing for connecting to an LCD module with a 54-pin FPC QVGA . One side PC1 connects to J2 of Board A and the other side PC2+PC3 connects to J9+J10 of the S5U13781R00C100 LCD interface board.

We appreciate your comments on our documentation. Please contact us via email at

X94A-G-008-01 Issue Date 2012/09/25

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S5U13781R00C10M Datasheet file may be downloaded here without warranties.

Datasheet ID: S5U13781R00C10M 511888