APA06F05

APA06F05 Datasheet

APA06 APA04 - Boost

Part	Datasheet
APA06F05	APA06F05 (pdf)

Related Parts	Information
APA06Y04	APA06Y04
APA06M04	APA06M04
APA06D04	APA06D04
APA06G05	APA06G05
APA04A03	APA04A03

PDF Datasheet Preview
20 Watts APA06 APA04 - Boost Total Power Input Voltages No. of Outputs: 20 Watts 3.3V, 5V Single Electrical Specs Input Input range Efficiency to 5.5V Buck to 4.0V Boost 90% , 83% 1.8V Special Features • Excellent for POL Applications • High Efficiency - Non Isolated • 3.3V and 5V input, • Standard SIP package X • Enable and Trim Function • Overcurrent Protection • Sense Pins Output Voltage tolerance Line regulation Load regulation Noise/ripple Short circuit protection Transient response ± ± ± 50mV P-P Auto-recovery 4%Vo, 200us Temperature Regulation %Vo/°C Switching frequency 430kHz typ Temperature coefficient ± 0.03%Vo/° C Isolation Non Isolated Environmental Operating ambient temperature: 25°C to 55°C full load, 200LFM Storage temperature -40°C to +125°C MTBF =7,000,000 hours Bellcore TR332, Ta=25°C Weight = grams max Safety UL 1950 Recognized CSA CAN22.2-950 Recognized TUV EN60950 Certified North America USA 1-888-41-ASTEC Europe UK 44 1384 842-211 Asia HK 852-2437-9662 APA06/04 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355 Ordering Information Input Voltage Output Voltage Buck V 1.2V A 1.5V A 1.8V A 2.1V A 2.5V A 3.3V A Boost V 5.0V A Notes Add -E to eliminate Sense and Power Good feature Right Angle Pins Available APA04 Boost Pinout Efficiency 80% 81% 83% 86% 87% 90% 89% Model Number APA06K04 APA06M04 APA06Y04 APA06D04 APA06G05 APA06F05 APA04A03 APA06 Buck Pinout Recommended Input Filter - 220uF Electrolytic Cap in parallel with 2.2uF Ceramic Cap Vin+ to GND Recommended Output Filter - 2.2uF Ceramic Cap in parallel with 1000uF Electrolytic Cap Vout+ to GND 20 MHz bandwidth. An external uf ceramic capacitor is recommended to be placed from +V out to comm. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. All specifications subject to change without notice. Mechanical drawings are for reference only.

PDF Datasheet Preview

20 Watts

APA06 APA04 - Boost

Total Power Input Voltages No. of Outputs:
20 Watts 3.3V, 5V Single

Electrical Specs

Input

Input range

Efficiency
to 5.5V Buck to 4.0V Boost
90% , 83% 1.8V

Special Features
• Excellent for POL Applications
• High Efficiency - Non Isolated
• 3.3V and 5V input,
• Standard SIP package X
• Enable and Trim Function
• Overcurrent Protection
• Sense Pins

Output

Voltage tolerance Line regulation Load regulation

Noise/ripple Short circuit protection Transient response
± ± ±
50mV P-P Auto-recovery 4%Vo, 200us

Temperature Regulation %Vo/°C

Switching frequency
430kHz typ

Temperature coefficient ± 0.03%Vo/° C

Isolation

Non Isolated

Environmental

Operating ambient temperature:
25°C to 55°C full load, 200LFM

Storage temperature -40°C to +125°C

MTBF =7,000,000 hours Bellcore TR332, Ta=25°C

Weight = grams max

Safety

UL 1950 Recognized

CSA CAN22.2-950 Recognized

TUV EN60950 Certified

North America USA 1-888-41-ASTEC Europe UK 44 1384 842-211

Asia HK 852-2437-9662

APA06/04

AMERICAS
5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698

EUROPE

Astec House, Waterfront Business Park Merry Hill, Dudley

West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355
Ordering Information

Input Voltage

Output Voltage

Buck V
1.2V A 1.5V A 1.8V A 2.1V A
2.5V A 3.3V A

Boost V
5.0V A

Notes Add -E to eliminate Sense and Power Good feature Right Angle Pins Available

APA04 Boost Pinout

Efficiency
80% 81% 83% 86% 87% 90% 89%

Model Number APA06K04 APA06M04 APA06Y04 APA06D04 APA06G05 APA06F05 APA04A03

APA06 Buck Pinout

Recommended Input Filter - 220uF Electrolytic Cap in parallel with 2.2uF Ceramic Cap Vin+ to GND

Recommended Output Filter - 2.2uF Ceramic Cap in parallel with 1000uF Electrolytic Cap Vout+ to GND
20 MHz bandwidth. An external uf ceramic capacitor is recommended to be placed from +V out to comm.

All specifications are typical at nominal line, full load, and 25°C unless otherwise noted.

All specifications subject to change without notice. Mechanical drawings are for reference only.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived APA06F05 Datasheet file may be downloaded here without warranties.

Datasheet ID: APA06F05 511077