FIT0292-W

FIT0292-W Datasheet


1.75mm PLA 1kg White SKU FIT0292-W

Part Datasheet
FIT0292-W FIT0292-W FIT0292-W (pdf)
PDF Datasheet Preview
1.75mm PLA 1kg White SKU FIT0292-W

INTRODUCTION

This is 1.75mm PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thingo-matic 3D printers. It comes with one spool that can be easily attached on 3D printer. PLA is a wonderful filament. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors. Polylactic acid or polylactide PLA is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch ,tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions. As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of to Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION
• Diameters 1.75mm
• Weight:1kg
• PLA Parameter
o Physical Property Typical value
o Tensile 46Mpa
o Tensile 20%
o Flexural Strength
70Mpa
o Flexural Modulus
3212Mpa
o Notched lzod
o density
1.31g/cm3
o MFR
10-14g/10min
o Accuracy
1.75±0.1mm

Powered By DFRobot 2008-2017
More datasheets: 4220-T110-K0M1-H121-A-0.5A-V | 4220-T110-K0M1-H121-A-0.8A-V | 4220-T110-K0M1-H121-A-1.5A-V | 4220-T110-K0M1-H121-A-10A | 4220-T110-K0M1-H121-A-3A | 4220-T110-K0M1-H121-A-1A-V | ATR4262M1-PLQW | CMKBR-6F TR | CMKBR-6F BK | 1729


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FIT0292-W Datasheet file may be downloaded here without warranties.

Datasheet ID: FIT0292-W 508910