S5U13743P00C100

S5U13743P00C100 Datasheet

S5U13743P00C100 Evaluation Board User Manual

Part	Datasheet
S5U13743P00C100	S5U13743P00C100 (pdf)

PDF Datasheet Preview
S1D13743 Mobile Graphics Engine S5U13743P00C100 Evaluation Board User Manual Epson Research and Development Vancouver Design Center Evaluation Board/Kit and Development Tool Important Notice This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purposes. It is not intended to meet the requirements of design for finished products. This evaluation board/kit or development tool is intended for use by an electronics engineer and is not a consumer product. The user should use it properly and in a safe manner. Seiko Epson does not assume any responsibility or liability of any kind of damage and/or fire caused by the use of it. The user should cease to use it when any abnormal issue occurs even during proper and safe use. The part used for this evaluation board/kit or development tool may be changed without any notice. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use, to resell, to export and/or to otherwise dispose of the products and any technical information furnished, if any for the development and/or manufacture of weapon of mass destruction or for other military purposes. All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies. SEIKO EPSON CORPORATION 2007 - 2012, All rights reserved. S1D13743 X70A-G-001-01 S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15 Epson Research and Development Vancouver Design Center Table of Contents 1 Introduction 5 2 Features 6 3 Installation and Configuration 7 Configuration DIP Switch 7 Configuration Jumpers 8 4 Technical Description 12 Power 12 Power Requirements 12 Voltage Regulators 12 S1D13743 Power 12 Clocks 13 Reset 13 Power Save 13 Host Interface 14 Direct Host Bus Interface Support 14 Connecting to the Epson S5U13U00P00C100 USB Adapter Board 15 LCD Panel Interface 16 GPIO Connections 17 5 Parts List 18 6 Schematic Diagrams 21 7 Board Layout 24 8 References 26 Documents 26 Document Sources 26 9 Technical Support 27 EPSON Display Controllers S1D13743 27 Ordering Information 27 S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15 S1D13743 X70A-G-001-01 Epson Research and Development Vancouver Design Center S1D13743 X70A-G-001-01 S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15 Epson Research and Development Vancouver Design Center Page 5 1 Introduction This manual describes the setup and operation of the S5U13743P00C100 Evaluation Board. The evaluation board is designed as an evaluation platform for the S1D13743 Mobile Graphics Engine. The S5U13743P00C100 evaluation board can be used with many native platforms via the host connector which provides the appropriate signals to support a variety of CPUs. The S5U13743P00C100 evaluation board can also connect to the S5U13U00P00C100 USB Adapter board so that it can be used with a laptop or desktop computer, via USB We appreciate your comments on our documentation. Please contact us via email at S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15 S1D13743 X70A-G-001-01 Page 6 Epson Research and Development Vancouver Design Center 2 Features The S5U13743P00C100 Evaluation Board includes the following features • 121-pin FCBGA S1D13743 Mobile Graphics Engine • Header with all S1D13743 Host Bus Interface signals • Headers for connection to the S5U13U00P00C100 USB Adapter board • Headers for connecting to LCD panels • Header for S1D13743 GPIO pins optional • On-board 4MHz oscillator • 14-pin DIP socket if a clock other than 4MHz must be used • 3.3V input power • On-board voltage regulator with 1.5V output • On-board voltage regulator with adjustable 6~24V output, 40mA max., to provide power for LED backlight of LCD panels. S1D13743 X70A-G-001-01 S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15 Epson Research and Development Vancouver Design Center Page 7 3 Installation and Configuration The S5U13743P00C100 evaluation board incorporates a DIP switch, jumpers, and 0 ohm resistors which allow it to be used with a variety of different configurations. Configuration DIP Switch SDU13743P00C100 SW1-[4:1] Config SW1-[1] SW1-[2] SW1-[3] SW1-[4] The S1D13743 has 3 configuration inputs CNF[2:0] . A DIP switch SW1 is used to configure CNF[2:0] as described below. Table 3-1 Summary of Power-On/Reset Options S1D13743 CNF[2:0] Config CNF0 Power-On/Reset State 0 OFF Host Data lines are normal Host data lines are swapped CNF1 CNF2 Host Data is 16-bit PIOVDD output current = 6.5mA not used Host data is 8-bit PIOVDD output current = 2.5mA = Required settings when using S5U13U00P00C100 USB Adapter board The following figure shows the location of DIP switch SW1 on the S5U13743P00C100 board. Ordering Information To order the S5U13743P00C100 Evaluation Board, contact the Epson sales representative in your area and order part number S5U13743P00C100. S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15 S1D13743 X70A-G-001-01 Page 28 X70A-G-001-01 Change Record Epson Research and Development Vancouver Design Center S1D13743 X70A-G-001-01 S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15

PDF Datasheet Preview

S1D13743 Mobile Graphics Engine

S5U13743P00C100 Evaluation Board User Manual

Epson Research and Development Vancouver Design Center

Evaluation Board/Kit and Development Tool Important Notice

This evaluation board/kit or development tool is designed for use for engineering evaluation, demonstration, or development purposes only. Do not use it for other purposes. It is not intended to meet the requirements of design for finished products.

This evaluation board/kit or development tool is intended for use by an electronics engineer and is not a consumer product. The user should use it properly and in a safe manner. Seiko Epson does not assume any responsibility or liability of any kind of damage and/or fire caused by the use of it. The user should cease to use it when any abnormal issue occurs even during proper and safe use.

The part used for this evaluation board/kit or development tool may be changed without any notice.

NOTICE

No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use, to resell, to export and/or to otherwise dispose of the products and any technical information furnished, if any for the development and/or manufacture of weapon of mass destruction or for other military purposes.

All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.

SEIKO EPSON CORPORATION 2007 - 2012, All rights reserved.

S1D13743 X70A-G-001-01

S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15

Epson Research and Development Vancouver Design Center

Table of Contents
1 Introduction 5
2 Features 6
3 Installation and Configuration 7 Configuration DIP Switch 7 Configuration Jumpers 8
4 Technical Description 12 Power 12 Power Requirements 12 Voltage Regulators 12 S1D13743 Power 12 Clocks 13 Reset 13 Power Save 13 Host Interface 14 Direct Host Bus Interface Support 14 Connecting to the Epson S5U13U00P00C100 USB Adapter Board 15 LCD Panel Interface 16 GPIO Connections 17
5 Parts List 18
6 Schematic Diagrams 21
7 Board Layout 24
8 References 26 Documents 26 Document Sources 26
9 Technical Support 27 EPSON Display Controllers S1D13743 27 Ordering Information 27

S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15

S1D13743 X70A-G-001-01

Epson Research and Development Vancouver Design Center

S1D13743 X70A-G-001-01

S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15

Epson Research and Development Vancouver Design Center

Page 5
1 Introduction

This manual describes the setup and operation of the S5U13743P00C100 Evaluation Board. The evaluation board is designed as an evaluation platform for the S1D13743 Mobile Graphics Engine.

The S5U13743P00C100 evaluation board can be used with many native platforms via the host connector which provides the appropriate signals to support a variety of CPUs. The S5U13743P00C100 evaluation board can also connect to the S5U13U00P00C100 USB Adapter board so that it can be used with a laptop or desktop computer, via USB

We appreciate your comments on our documentation. Please contact us via email at

S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15

S1D13743 X70A-G-001-01

Page 6

Epson Research and Development Vancouver Design Center
2 Features

The S5U13743P00C100 Evaluation Board includes the following features
• 121-pin FCBGA S1D13743 Mobile Graphics Engine
• Header with all S1D13743 Host Bus Interface signals
• Headers for connection to the S5U13U00P00C100 USB Adapter board
• Headers for connecting to LCD panels
• Header for S1D13743 GPIO pins optional
• On-board 4MHz oscillator
• 14-pin DIP socket if a clock other than 4MHz must be used
• 3.3V input power
• On-board voltage regulator with 1.5V output
• On-board voltage regulator with adjustable 6~24V output, 40mA max., to provide
power for LED backlight of LCD panels.

S1D13743 X70A-G-001-01

S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15

Epson Research and Development Vancouver Design Center

Page 7
3 Installation and Configuration

The S5U13743P00C100 evaluation board incorporates a DIP switch, jumpers, and 0 ohm resistors which allow it to be used with a variety of different configurations.

Configuration DIP Switch

SDU13743P00C100 SW1-[4:1] Config

SW1-[1] SW1-[2] SW1-[3] SW1-[4]

The S1D13743 has 3 configuration inputs CNF[2:0] . A DIP switch SW1 is used to configure CNF[2:0] as described below.

Table 3-1 Summary of Power-On/Reset Options

S1D13743 CNF[2:0] Config

CNF0

Power-On/Reset State
0 OFF

Host Data lines are normal

Host data lines are swapped

CNF1 CNF2

Host Data is 16-bit PIOVDD output current = 6.5mA not used

Host data is 8-bit PIOVDD output current = 2.5mA
= Required settings when using S5U13U00P00C100 USB Adapter board

The following figure shows the location of DIP switch SW1 on the S5U13743P00C100 board.
Ordering Information

To order the S5U13743P00C100 Evaluation Board, contact the Epson sales representative in your area and order part number S5U13743P00C100.

S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15

S1D13743 X70A-G-001-01

Page 28

X70A-G-001-01

Change Record

Epson Research and Development Vancouver Design Center

S1D13743 X70A-G-001-01

S5U13743P00C100 Evaluation Board User Manual Issue Date 2007/08/15

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived S5U13743P00C100 Datasheet file may be downloaded here without warranties.

Datasheet ID: S5U13743P00C100 511885