684-18-S

684-18-S Datasheet


E-Z Hook, Div. of Tektest, Inc. - Item # 684, Alligator Jumper

Part Datasheet
684-18-S 684-18-S 684-18-S (pdf)
Related Parts Information
684-60RED 684-60RED 684-60RED
684-60BLK 684-60BLK 684-60BLK
684-144BLK 684-144BLK 684-144BLK
684-36RED 684-36RED 684-36RED
684-36YEL 684-36YEL 684-36YEL
684-36ORN 684-36ORN 684-36ORN
684-36GRY 684-36GRY 684-36GRY
684-36GRN 684-36GRN 684-36GRN
684-36BRN 684-36BRN 684-36BRN
684-36BLU 684-36BLU 684-36BLU
684-36BLK 684-36BLK 684-36BLK
684-24RED 684-24RED 684-24RED
684-24BLK 684-24BLK 684-24BLK
684-18RED 684-18RED 684-18RED
684-18BLK 684-18BLK 684-18BLK
684-36WTE 684-36WTE 684-36WTE
684-36VLT 684-36VLT 684-36VLT
684-144RED 684-144RED 684-144RED
PDF Datasheet Preview
E-Z Hook, Div. of Tektest, Inc. - Item # 684, Alligator Jumper

E-Z Hook, A Div. of Tektest, Inc. P.O. Box 660729, Arcadia, CA 91066-0729 Phone Fax E-mail:

All Categories > Test Leads > Alligator Clip Test Leads > Item # 684

Item # 684, Alligator Jumper
larger image

Alligator Jumper Standard alligator clip to standard alligator clip test lead jumper with heavier gauge wire.

Standard alligator test lead is offered in 18 AWG PVC wire. Additional lead lengths, wire types, and custom leads available upon request. Available in 10 standard colors.

Specifications
• Lead Length and Cable Length Information
• How to Order Test Leads & Cable Assemblies
• Field Servicing Information

Specifications Gator Model Wire Gauge Wire Connector #1 Connector #2

Standard Lengths

Standard
18 AWG
9274, standard alligator clip
9274, standard alligator clip
3 in 8 cm 6 in 15 cm 12 in 30 cm 18 in 45 cm 24 in 60 cm 36 in 90 cm 48 in 120 cm 60 in 150 cm

Colors

Black 0 larger image

Brown 1 larger image

Red 2 larger image

Orange 3 larger image

Yellow 4 larger image

Green 5 larger image

Blue 6
3/9/2011

E-Z Hook, Div. of Tektest, Inc. - Item # 684, Alligator Jumper
larger image

Violet 7 larger image

Gray 8 larger image

Unit

White 9 larger image
each

Lead Length and Cable Length Information E-Z-Hook offers a selection of standard length test leads, patch cords, and cable assemblies. We also offer custom lengths to fit special requirements.

All length measurements are made in inches, see diagrams below for measuring examples:

Standard lengths in inches for test lead and patch cord assemblies:
3" 8 cm lead wire 4" 10 cm lead wire
6" 15 cm 8" 20 cm 12" 30 cm
18" 45 cm 24" 60 cm 36" 90 cm 48" 120 cm 60" 150 cm

Standard lengths in inches for cable assemblies:
6" 15 cm
30" 75 cm
12" 30 cm
Ordering E-Z-Hook test leads and cable assemblies is E-Z. Select the part number supplied in the product section, then select your lead or cable length and color. Example 704XR-18-RED Part No.-Length-Color . Variations of each hook may be ordered in place of the standard hook. Ordering information is provided at the beginning of each section.

Field Servicing Information

Most hooks are designed to be field serviceable. To replace a lead wire, pull on the plunger until it slips free of the body. Strip lead wire 3/4" 19 mm , feed wire through plunger and wrap around terminal as shown. Solder and cut off excess wire at solder point. Reassemble part, making sure the terminal and nylon fins enter their respective grooves. Keep slack in lead wire pulled out while assembling to prevent binding.

NOTE To disassemble XM Micro-Hook connectors or leads, actuate plunger to expose hook and grasp behind hook with long nose pliers before pulling plunger off. Failure to do so will result in damage to part.
3/9/2011
More datasheets: EPCDESIGNTOOL_LG-EM | CY7C1471V25-133AXC | CY7C1471BV25-133AXCT | CY7C1471BV25-133AXC | CY7C1471V25-133AXCT | SW5501 | SW5502-TB | FQA9N50 | AP3605FNTR-E1 | 3234


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 684-18-S Datasheet file may be downloaded here without warranties.

Datasheet ID: 684-18-S 510442