PVDIS-T101-DC1000V-30A

PVDIS-T101-DC1000V-30A Datasheet

The new E-T-A DC Disconnect PVDIS meets the challenge. It features hybrid technology and is the first E-T-A product which has explicitly been designed for the photovoltaic market and its typical

Part	Datasheet
PVDIS-T101-DC1000V-30A	PVDIS-T101-DC1000V-30A (pdf)

PDF Datasheet Preview
DC Disconnect Type Reliable Disconnection of Photovoltaic Systems Technical Information DC Disconnect Type It is a general fact that there is a growing demand for high-capacity DC disconnects as referred to in standards applicable to photovoltaic systems. In addition it was our goal to allow reliable physical isolation of even DC 1,000 V in a very compact design. The new E-T-A DC Disconnect PVDIS meets the challenge. It features hybrid technology and is the first E-T-A product which has explicitly been designed for the photovoltaic market and its typical DC applications. Its enclosure is track-mountable and ideally suited for installation in distribution boxes. The electronic control unit will interrupt the circuit, the mechanical part ensures single or double pole physical isolation, making this technology also suitable for both grounded and ungrounded systems. In addition the hybrid function allows reliable disconnection also in the event of low currents and ensures a low-wear contact system. The hybrid functional principle does not require any additional power supply for the electronic unit. The modular design allows other versions and variants such as remote control, firefighter switch and/or arc fault detection as well as status indication. It is also possible to use the product in inverters by means of a modified enclosure or a modified mounting method please enquire. Start of series production is scheduled for the second quarter Technical data Rated operational voltage Rated operational current Ambient temperature Tested in accordance with Fail-safe function Dimensions max. DC 1,000 V max. 30 A -30 °C...+60 °C IEC/EN 60947-3 integral 99 x 90 x max. mm ● Explicitly designed for the photovoltaic market and its requirements ● Double pole DC Disconnect ● Screw terminals for cable cross sections up to max. 16 for PV+ and PV● Design in accordance with DIN 43880 for rail mounting ● Lock-out feature in OFF position ● Also available as DC Disconnect with remote control, firefighter switch and arc fault detection DC Disconnection for photovoltaic systems. F_DC-Lasttrennschalter_PVDIS_e_251012E E-T-A Elektrotechnische Apparate GmbH Industriestraße 2-8 90518 ALTDORF DEUTSCHLAND Phone +49 9187 10-0 Fax +49 9187 10-397 E-Mail:

PDF Datasheet Preview

DC Disconnect Type Reliable Disconnection of Photovoltaic Systems

Technical Information DC Disconnect Type

It is a general fact that there is a growing demand for high-capacity DC disconnects as referred to in standards applicable to photovoltaic systems. In addition it was our goal to allow reliable physical isolation of even DC 1,000 V in a very compact design.

The new E-T-A DC Disconnect PVDIS meets the challenge. It features hybrid technology and is the first E-T-A product which has explicitly been designed for the photovoltaic market and its typical

DC applications. Its enclosure is track-mountable and ideally suited for installation in distribution boxes.

The electronic control unit will interrupt the circuit, the mechanical part ensures single or double pole physical isolation, making this technology also suitable for both grounded and ungrounded systems. In addition the hybrid function allows reliable disconnection also in the event of low currents and ensures a low-wear contact system. The hybrid functional principle
does not require any additional power supply for the electronic unit.

The modular design allows other versions and variants such as remote control, firefighter switch and/or arc fault detection as well as status indication. It is also possible to use the product in inverters by means of a modified enclosure or a modified mounting method please enquire. Start of series production is scheduled for the second quarter

Technical data

Rated operational voltage Rated operational current Ambient temperature Tested in accordance with Fail-safe function Dimensions
max. DC 1,000 V max. 30 A -30 °C...+60 °C IEC/EN 60947-3 integral 99 x 90 x max. mm
● Explicitly designed for the photovoltaic market and its requirements ● Double pole DC Disconnect ● Screw terminals for cable cross sections up to max. 16 for PV+ and PV● Design in accordance with DIN 43880 for rail mounting ● Lock-out feature in OFF position ● Also available as DC Disconnect with remote control,
firefighter switch and arc fault detection

DC Disconnection for photovoltaic systems.

F_DC-Lasttrennschalter_PVDIS_e_251012E

E-T-A Elektrotechnische Apparate GmbH Industriestraße 2-8 90518 ALTDORF

DEUTSCHLAND Phone +49 9187 10-0 Fax +49 9187 10-397 E-Mail:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PVDIS-T101-DC1000V-30A Datasheet file may be downloaded here without warranties.

Datasheet ID: PVDIS-T101-DC1000V-30A 510426