PT7C4502WE

PT7C4502WE Datasheet


PT7C4502

Part Datasheet
PT7C4502WE PT7C4502WE PT7C4502WE (pdf)
Related Parts Information
PT7C4502DE PT7C4502DE PT7C4502DE
PT7C4502WEX PT7C4502WEX PT7C4502WEX
PT7C4502-2WF PT7C4502-2WF PT7C4502-2WF
PDF Datasheet Preview
PT7C4502

PLL Clock Multiplier
• Low cost frequency multiplier
• Zero ppm multiplication error
• Input crystal frequency of 5 - 30 MHz
• Input clock frequency of 4 - 50 MHz
• Output clock frequencies up to 180 MHz
• Period jitter 50ps 100~180MHz
• Duty cycle of 45/55% up to 160MHz
• Operating voltages of to 5.5V
• Tri-state output for board level testing
• Die form, Wafer form
• Used for crystal oscillator

The PT7C4502 is a high performance frequency multiplier, which integrates Analog Phase Lock Loop techniques.

The PT7C4502 is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input. It is designed to replace crystal oscillators in most electronic systems, clock multiplier and frequency translation.

Using Phase-Locked-Loop PLL techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 180 MHz.

The complex Logic divider is the ability to generate nine different popular multiplication factors, allowing one chip to output many common frequencies.

The device also has an Output Enable pin that tristates the clock output when the OE pin is taken low. This product is intended for clock generation and frequency translation with low output jitter variation in the output period

Block Diagram

S0 S1

X1/ICLK X2

PLL Clock Synthesis and

Control Circuit

Crystal Oscillator

Output Buffer
2014-09-0002

PT0140-6
09/23/14

PT7C4502 PLL Clock Multiplier

Pin/Pad Configuration
1520um
1100um

OE X1 -ICLK

AVDD DVDD

S1 AGND

DGND

CLK S0

Pin/Pad Description

Pin Name Pad Name

X1/ICLK X1-ICLK

VCC GND

OE CLK

AVDD DVDD AGND

DGND

Type I O I O P

Description Crystal connection or clock input. Crystal connection. Leave unconnected for clock input. Multiplier select pin Connect to Vcc or float. Multiplier select pin Connect to GND or float. Internal pull-up. Output Enable. Tri-states CLK output when low. Clock output. Analog Power. Digital power. Analog Ground Digital ground.

Pad Coordinate File

Pad Name X Coordinate Y Coordinate Pad Name X Coordinate Y Coordinate

X1-ICLK

DVDD
Ordering Information

Package Code

Package

PT7C4502DE
350±25µm without coating Die form

PT7C4502-2WF
220±20µm with coating Wafer form

Note E = Pb-free and Green “-2” shows die thickness is 220±20µm with coating PT7C4502DE die thickness is 350±25µm with coating. Adding X Suffix= Tape/Reel

Pericom Semiconductor Corporation  1-800-435-2336 

Pericom reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance and to supply the best possible product. Pericom does not assume any responsibility for use of any circuitry described other than the circuitry embodied in Pericom product. The company makes no representations that circuitry described herein is free from patent infringement or other rights, of Pericom.
2014-09-0002

PT0140-6
09/23/14
More datasheets: MV54154 | 3054 | 2418 | M5436 SL002 | M5436 SL001 | M5436 SL005 | 10120751-015LF | FGPF30N30TDTU | PT7C4502DE | PT7C4502WEX


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PT7C4502WE Datasheet file may be downloaded here without warranties.

Datasheet ID: PT7C4502WE 510119