PI3A3159ZCEX

PI3A3159ZCEX Datasheet

PI3A3159

Part	Datasheet
PI3A3159ZCEX	PI3A3159ZCEX (pdf)

PDF Datasheet Preview
PI3A3159 3.0V, SOTiny SPDT Analog Switch • CMOS Technology for Bus and Analog Applications • Low ON-Resistance +2.7V Supply • Wide VDD Range +1.5V to +3.6V • Low Power Consumption 5µW • Rail-to-Rail switching throughout Signal Range • Fast Switching Speed 20ns max. at 3.3V • High Off Isolation at 100 kHz • 100kHz Crosstalk Rejection Reduces Signal Distortion • Extended Industrial Temperature Range to 85°C • Packaging Pb-free & Green available 6-pin Small Compact SOT23 T • Cell Phones • PDAs • Portable Instrumentation • Battery Powered Communications • Computer Peripherals The PI3A3159 is a, fast single-pole double-throw SPDT CMOS switch. It can be used as an analog switch or as a low-delay bus switch. Specified over a wide operating power supply voltage range, +1.5V to +3.6V, the PI3A3159 has an On-Resistance of at 3.0V. Control input, IN, tolerates input drive signals up to 3.3V, independent of supply voltage. PI3A3159 is a lower voltage and On-Resistance replacement for the PI5A3159. Connection Diagram NO 1 GND 2 6 IN 5 VDD Pin Description Pin Number Name Description Data Port Normally Open Ground Data Port Normally Closed Common Output/Data Port Positive Power Supply Logic Control 4 COM Function Table Logic Input 0 1 Function NC Connected to COM NO Connected to COM 09-0003 PS8710D 10/23/09 PI3A3159 3.0V, SOTiny SPDT Analog Switch Absolute Maximum Ratings Voltages Referenced to GND to +3.6V VIN, VCOM, VNC, VNO Note to VDD +0.3V or 30mA, whichever occurs first Current any ±200mA Peak Current, COM, NO, NC Pulsed at 1ms, 10% duty ±400mA Thermal Information Continuous Power Dissipation SOT23-6 derate 7.1mW/ºC above +70ºC ......................... 0.5W Storage Temperature to +150ºC Lead Temperature soldering, 10s .................................. +300ºC Note Signals on NC, NO, COM, or IN exceeding VDD or GND are clamped by internal diodes. Limit forward diode current to 30mA. Caution Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Electrical Specifications - Single +3.3V Supply VDD = +3.3V ± 10%, GND = 0V, VIH = 1.4V, VIL = 0.5V Parameter Symbol Conditions Analog Switch Analog Signal Range VANALOG Ordering Information Ordering Code Package Code Package Description PI3A3159TEX Pb-free & Green, 6-pin, SOT23 Notes Thermal characteristics can be found on the company web site at X = Tape/Reel Top Mark ZG 09-0003 Pericom Semiconductor Corporation • 1-800-435-2336 • 8 PS8710D 10/23/09

PDF Datasheet Preview

PI3A3159
3.0V, SOTiny SPDT Analog Switch
• CMOS Technology for Bus and Analog Applications
• Low ON-Resistance +2.7V Supply
• Wide VDD Range +1.5V to +3.6V
• Low Power Consumption 5µW
• Rail-to-Rail switching throughout Signal Range
• Fast Switching Speed 20ns max. at 3.3V
• High Off Isolation at 100 kHz
• 100kHz Crosstalk Rejection Reduces

Signal Distortion
• Extended Industrial Temperature Range to 85°C
• Packaging Pb-free & Green available 6-pin Small Compact SOT23 T
• Cell Phones
• PDAs
• Portable Instrumentation
• Battery Powered Communications
• Computer Peripherals

The PI3A3159 is a, fast single-pole double-throw SPDT CMOS switch. It can be used as an analog switch or as a low-delay bus switch. Specified over a wide operating power supply voltage range, +1.5V to +3.6V, the PI3A3159 has an On-Resistance of at 3.0V.

Control input, IN, tolerates input drive signals up to 3.3V, independent of supply voltage.

PI3A3159 is a lower voltage and On-Resistance replacement for the PI5A3159.

Connection Diagram

NO 1 GND 2
6 IN 5 VDD

Pin Description

Pin Number Name

Description Data Port Normally Open Ground Data Port Normally Closed Common Output/Data Port Positive Power Supply Logic Control
4 COM

Function Table

Logic Input 0 1

Function NC Connected to COM NO Connected to COM
09-0003

PS8710D
10/23/09

PI3A3159
3.0V, SOTiny SPDT Analog Switch

Absolute Maximum Ratings

Voltages Referenced to GND to +3.6V VIN, VCOM, VNC, VNO Note to VDD +0.3V or 30mA, whichever occurs first

Current any ±200mA

Peak Current, COM, NO, NC Pulsed at 1ms, 10% duty ±400mA

Thermal Information

Continuous Power Dissipation SOT23-6 derate 7.1mW/ºC above +70ºC ......................... 0.5W Storage Temperature to +150ºC Lead Temperature soldering, 10s .................................. +300ºC

Note Signals on NC, NO, COM, or IN exceeding VDD or GND are clamped
by internal diodes. Limit forward diode current to 30mA.

Caution Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied.

Electrical Specifications - Single +3.3V Supply

VDD = +3.3V ± 10%, GND = 0V, VIH = 1.4V, VIL = 0.5V

Parameter

Symbol Conditions

Analog Switch

Analog Signal Range

VANALOG
Ordering Information
Ordering Code

Package Code

Package Description

PI3A3159TEX

Pb-free & Green, 6-pin, SOT23

Notes Thermal characteristics can be found on the company web site at

X = Tape/Reel

Top Mark ZG
09-0003

Pericom Semiconductor Corporation
• 1-800-435-2336
• 8

PS8710D
10/23/09

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PI3A3159ZCEX Datasheet file may be downloaded here without warranties.

Datasheet ID: PI3A3159ZCEX 510041