MSA-0986-TR1G

MSA-0986-TR1G Datasheet

MSA-0986

Part	Datasheet
MSA-0986-TR1G	MSA-0986-TR1G (pdf)

Related Parts	Information
MSA-0986-TR2G	MSA-0986-TR2G
MSA-0986-BLKG	MSA-0986-BLKG

PDF Datasheet Preview
MSA-0986 Cascadable Silicon Bipolar MMIC Amplifier Data Sheet The MSA-0986 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit MMIC housed in a low cost, surface mount plastic package. This MMIC is designed for very wide bandwidth industrial and commercial applications that require flat gain and low VSWR. The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. • Broadband, Minimum Ripple Cascadable Gain Block • ± dB Typical Gain Flatness from to GHz • 3 dB Bandwidth to GHz • dBm Typical P1dB at GHz • Surface Mount Plastic Package • Tape-and-Reel Packaging Option Available • Lead-free Option Available 86 Plastic Package Typical Biasing Configuration R bias VCC > 12 V C block IN 3 1 MSA RFC Optional C block Vd = V MSA-0986 Absolute Maximum Ratings Parameter Absolute Maximum[1] Device Current 65 mA Power Dissipation[2,3] 500 mW RF Input Power +13 dBm Junction Temperature 150°C Storage Temperature to +150°C Notes Permanent damage may occur if any of these limits are exceeded. TCASE = 25°C. Derate at mW/°C for TC > 80°C. Thermal Resistance[2] = 140°C/W Electrical Specifications[1], TA = 25°C Parameters and Test Conditions Id = 35 mA, ZO = 50 Power Gain \|S21\| 2 f = GHz f3 dB Gain Flatness 3 dB Bandwidth[2] f = to GHz VSWR Input VSWR Output VSWR f = to GHz f = to GHz 50 Noise Figure Ordering Information Part Numbers No. of Devices Comments MSA-0986-BLK Bulk MSA-0986-BLKG Bulk MSA-0986-TR1 1000 7" Reel MSA-0986-TR1G 1000 7" Reel MSA-0986-TR2 4000 13" Reel MSA-0986-TR2G 4000 13" Reel Note Order part number with a “G” suffix if lead-free option is desired. MSA-0986 Typical Scattering Parameters ZO = 50 TA = 25°C, Id = 35 mA Freq. dB Mag Ang dB Mag Ang Mag Ang 145 18 156 5 166 4 167 1 Typical Performance, TA = 25°C unless otherwise noted 2 Id = 25 mA Id = 35-45 mA 0 FREQUENCY GHz Figure Typical Power Gain vs. Frequency. Id mA 50 TC = +85°C TC = +25°C 40 TC = Figure Device Current vs. Voltage. NF dB P1 dB dBm P1 dB

PDF Datasheet Preview

MSA-0986

Cascadable Silicon Bipolar MMIC Amplifier

Data Sheet

The MSA-0986 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit MMIC housed in a low cost, surface mount plastic package. This MMIC is designed for very wide bandwidth industrial and commercial applications that require flat gain and low VSWR.

The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility.
• Broadband, Minimum Ripple Cascadable Gain Block
• ± dB Typical Gain Flatness from to GHz
• 3 dB Bandwidth to GHz
• dBm Typical P1dB at GHz
• Surface Mount Plastic Package
• Tape-and-Reel Packaging Option Available
• Lead-free Option Available
86 Plastic Package

Typical Biasing Configuration

R bias

VCC > 12 V

C block IN
3 1 MSA

RFC Optional

C block Vd = V

MSA-0986 Absolute Maximum Ratings

Parameter

Absolute Maximum[1]

Device Current
65 mA

Power Dissipation[2,3]
500 mW

RF Input Power
+13 dBm

Junction Temperature
150°C

Storage Temperature
to +150°C

Notes Permanent damage may occur if any of these limits are exceeded.

TCASE = 25°C. Derate at mW/°C for TC > 80°C.

Thermal Resistance[2] = 140°C/W

Electrical Specifications[1], TA = 25°C

Parameters and Test Conditions Id = 35 mA, ZO = 50

Power Gain |S21| 2
f = GHz
f3 dB

Gain Flatness 3 dB Bandwidth[2]
f = to GHz

VSWR

Input VSWR Output VSWR
f = to GHz f = to GHz
50 Noise Figure
Ordering Information

Part Numbers No. of Devices Comments

MSA-0986-BLK

Bulk

MSA-0986-BLKG

Bulk

MSA-0986-TR1
1000
7" Reel

MSA-0986-TR1G
1000
7" Reel

MSA-0986-TR2
4000
13" Reel

MSA-0986-TR2G
4000
13" Reel

Note Order part number with a “G” suffix if lead-free option is desired.

MSA-0986 Typical Scattering Parameters ZO = 50 TA = 25°C, Id = 35 mA

Freq.
dB Mag Ang
dB Mag Ang

Mag Ang
145 18
156 5
166 4
167 1

Typical Performance, TA = 25°C
unless otherwise noted
2 Id = 25 mA

Id = 35-45 mA 0

FREQUENCY GHz

Figure Typical Power Gain vs. Frequency.

Id mA
50 TC = +85°C TC = +25°C
40 TC =

Figure Device Current vs. Voltage.

NF dB

P1 dB dBm

P1 dB

More datasheets: SMP04EPZ | SMP04EQ | SBL1060 | SBL1050 | SBL1030 | SBL1045 | SBL1040 | SBL1035 | 26505-ESD | MSA-0986-TR2G

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MSA-0986-TR1G Datasheet file may be downloaded here without warranties.

Datasheet ID: MSA-0986-TR1G 520482