DMP3100L-7

DMP3100L-7 Datasheet

DMP3100L

Part	Datasheet
DMP3100L-7	DMP3100L-7 (pdf)

PDF Datasheet Preview
DMP3100L P-CHANNEL ENHANCEMENT MODE MOSFET • Low On-Resistance VGS = -10V, ID = -2.7A VGS = -4.5V, ID = -2.0A • Low Gate Threshold Voltage • Low Input Capacitance • Fast Switching Speed • Low Input/Output Leakage • Lead Free By Design/RoHS Compliant Note 2 • "Green" Device Note 4 • Qualified to AEC-Q101 Standards for High Reliability SOT-23 Gate Mechanical Data • Case SOT-23 • Case Material Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 • Moisture Sensitivity Level 1 per J-STD-020 • Terminals Finish Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 • Terminal Connections See Diagram • Marking Information See Page 3 • Ordering Information See Page 3 • Weight grams approximate Drain TOP VIEW Source EQUIVALENT CIRCUIT Maximum Ratings = 25°C unless otherwise specified Characteristic Drain-Source Voltage Gate-Source Voltage Drain Current Note 1 VGS = -10V Steady State Pulsed Drain Current Note 3 TA = 25°C TA = 70°C Symbol VDSS VGSS TOP VIEW Value -30 ±20 -2 -8 Units V Thermal Characteristics Characteristic Total Power Dissipation Note 1 Thermal Resistance, Junction to Ambient = 25°C Note 1 Operating and Storage Temperature Range Symbol PD TJ, TSTG Value 115 -55 to +150 Units W °C/W °C Electrical Characteristics = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS Note 5 Unit Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate-Source Leakage BVDSS IDSS IGSS -800 ±80 ±800 ON CHARACTERISTICS Note 5 Gate Threshold Voltage VGS th Static Drain-Source On-Resistance RDS ON 86 147 100 170 Forward Transfer Admittance Diode Forward Voltage Note 5 DYNAMIC CHARACTERISTICS Ordering Information Note 6 Part Number DMP3100L-7 Case SOT-23 For packaging details, go to our website at Marking Information Packaging 3000/Tape & Reel Date Code Key Year Code Month Code P3S = Product Type Marking Code YM = Date Code Marking Y = Year ex U = 2007 M = Month ex 9 = September 2007 U 2008 V 2009 W 2010 X 2011 Y 2012 Z Package Outline Dimensions SOT-23 Dim Min Max Typ All Dimensions in mm DMP3100L 3 of 4 June 2010 Diodes Incorporated Suggested Pad Layout DMP3100L Dimensions Z X Y C E Value in mm IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION . Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: are intended to implant into the body, or support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright 2010, Diodes Incorporated DMP3100L

PDF Datasheet Preview

DMP3100L

P-CHANNEL ENHANCEMENT MODE MOSFET
• Low On-Resistance VGS = -10V, ID = -2.7A VGS = -4.5V, ID = -2.0A
• Low Gate Threshold Voltage
• Low Input Capacitance
• Fast Switching Speed
• Low Input/Output Leakage
• Lead Free By Design/RoHS Compliant Note 2
• "Green" Device Note 4
• Qualified to AEC-Q101 Standards for High Reliability

SOT-23

Gate

Mechanical Data
• Case SOT-23
• Case Material Molded Plastic, “Green” Molding Compound.

UL Flammability Classification Rating 94V-0
• Moisture Sensitivity Level 1 per J-STD-020
• Terminals Finish Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
• Terminal Connections See Diagram
• Marking Information See Page 3
• Ordering Information See Page 3
• Weight grams approximate

Drain

TOP VIEW

Source EQUIVALENT CIRCUIT

Maximum Ratings = 25°C unless otherwise specified

Characteristic

Drain-Source Voltage

Gate-Source Voltage

Drain Current Note 1 VGS = -10V

Steady State

Pulsed Drain Current Note 3

TA = 25°C TA = 70°C

Symbol VDSS VGSS

TOP VIEW

Value -30 ±20 -2 -8

Units V

Thermal Characteristics

Characteristic Total Power Dissipation Note 1 Thermal Resistance, Junction to Ambient = 25°C Note 1 Operating and Storage Temperature Range

Symbol PD

TJ, TSTG

Value 115 -55 to +150

Units W
°C/W °C

Electrical Characteristics = 25°C unless otherwise specified

Characteristic OFF CHARACTERISTICS Note 5

Unit

Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current

Gate-Source Leakage

BVDSS

IDSS

IGSS
-800
±80 ±800

ON CHARACTERISTICS Note 5

Gate Threshold Voltage

VGS th

Static Drain-Source On-Resistance

RDS ON
86 147
100 170

Forward Transfer Admittance Diode Forward Voltage Note 5 DYNAMIC CHARACTERISTICS
Ordering Information Note 6

Part Number DMP3100L-7

Case SOT-23

For packaging details, go to our website at

Marking Information

Packaging 3000/Tape & Reel

Date Code Key Year Code

Month Code

P3S = Product Type Marking Code YM = Date Code Marking Y = Year ex U = 2007 M = Month ex 9 = September
2007 U
2008 V
2009 W
2010 X
2011 Y
2012 Z

Package Outline Dimensions

SOT-23

Dim Min Max Typ

All Dimensions in mm

DMP3100L
3 of 4

June 2010

Diodes Incorporated

Suggested Pad Layout

DMP3100L

Dimensions Z X Y C E

Value in mm

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION .

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:
are intended to implant into the body, or
support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.

Copyright 2010, Diodes Incorporated

DMP3100L

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DMP3100L-7 Datasheet file may be downloaded here without warranties.

Datasheet ID: DMP3100L-7 509940