AP1695MTR-G1

AP1695MTR-G1 Datasheet

PART OBSOLETE - USE AP1695-20C

Part	Datasheet
AP1695MTR-G1	AP1695MTR-G1 (pdf)

PDF Datasheet Preview
OBSOLETE PART DISCONTINUED PART OBSOLETE - USE AP1695-20C AP1695 OFFLINE, HIGH PF, HIGH EFFICIENCY DIMMABLE LED DRIVER IC The AP1695 is a high performance AC/DC power factor corrector for mains dimmable LED driver applications. The device uses Pulse Frequency Modulation PFM technology to regulate output current while achieving high power factor and low THD. It operates as a BCM Boundary Conduction Mode which is good for EMI. The AP1695 internally integrates a 500V high voltage MOSFET which can realize a lower BOM cost. The AP1695 provides accurate constant current CC regulation while removing the opto-coupler and secondary control circuitry. It also eliminates the need of loop compensation circuitry while maintaining stability. It can meet the requirement of IEC6100-3-2 harmonic standard. The AP1695 features low start-up current, low operation current. It adopts valley on switching mode to achieve high efficiency. It also has rich protection features including over voltage, short circuit, over temperature protection. The AP1695 provides the dimmable LED driver with a wide dimmer compatibility including leading edge and trailing edge dimmer. The AP1695 can achieve deep dimming down to 1%, while the dimming curve is compliant with the standard of NEMA SSL6. • Boundary Conduction Mode BCM Operation to Achieve Highefficiency • High PF and Low THD PF>0.9, THD<30% • High Efficiency without Dimmer • Wide Range of Dimmer Compatibility • Dimming Curve Compliant with NEMA SSL6 • Low Start-up Current • Tight LED Current • Tight LED Open Voltage • Valley-mode Switching to Minimize the Transition Loss • Internal Integrated 2A/500V MOSFET can Cover up to 10W • Easy EMI • Internal Protections: • Under Voltage Lock Out UVLO • Leading-edge Blanking LEB • Output Short Protection • Output Open Protection • Over Temperature Protection • Flexible for Design with Small Form Factor and Very Low BOM Cost • Totally Lead-Free & Fully RoHS Compliant Notes 1 & 2 • Halogen and Antimony Free. “Green” Device Note 3 The AP1695 is available in SO-7 package. Pin Assignments • Mains Dimmable LED Lighting Top View S1 CS 2 RI 3 GND 4 SO-7 7 Drain 6 VCC 5 FB No purposely added lead. Fully EU Directive 2002/95/EC RoHS & 2011/65/EU RoHS 2 compliant. See for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine <1500ppm total Br + Cl and <1000ppm antimony compounds. AP1695 1 of 15 January 2017 Diodes Incorporated OBSOLETE PART DISCONTINUED PART OBSOLETE - USE AP1695-20C AP1695 Typical Applications Circuit TVS1 C1 C2 R2 ZD1 R3 Q2 Drain AP1695 R1 3 RI 4 GND R7 CS 2 LED+ LED- Ordering Information Product Name PART OBSOLETE - USE AP1695-20C AP1695 X XX Package M SO-7 Packing TR Tape & Reel AP1695 RoHS/Green G1 Green Package SO-7 Temperature Range -40°C to +105°C Marking Information Part Number AP1695MTR-G1 Marking ID 1695M-G1 Packing 4000/13’’Tape & Reel Top View 1695 M-G1 YWWAXX First and Second Lines Logo and Marking ID Third Line Date Code Y Year WW Work Week of Molding A Assembly House Code XX 7th and 8th Digits of Batch No. AP1695 12 of 15 January 2017 Diodes Incorporated OBSOLETE PART DISCONTINUED PART OBSOLETE - USE AP1695-20C Package Outline Dimensions All dimensions in mm inch . 1 Package Type SO-7 AP1695 0° 8° Note Eject hole, oriented hole and mold mark is optional. AP1695 13 of 15 January 2017 Diodes Incorporated OBSOLETE PART DISCONTINUED Suggested Pad Layout 1 Package Type SO-7 PART OBSOLETE - USE AP1695-20C AP1695 Dimensions Value Z mm / inch G mm / inch X mm / inch

PDF Datasheet Preview

OBSOLETE PART DISCONTINUED

PART OBSOLETE - USE AP1695-20C

AP1695

OFFLINE, HIGH PF, HIGH EFFICIENCY DIMMABLE LED DRIVER IC

The AP1695 is a high performance AC/DC power factor corrector for mains dimmable LED driver applications. The device uses Pulse Frequency Modulation PFM technology to regulate output current while achieving high power factor and low THD. It operates as a BCM Boundary Conduction Mode which is good for EMI.

The AP1695 internally integrates a 500V high voltage MOSFET which can realize a lower BOM cost. The AP1695 provides accurate constant current CC regulation while removing the opto-coupler and secondary control circuitry. It also eliminates the need of loop compensation circuitry while maintaining stability. It can meet the requirement of IEC6100-3-2 harmonic standard.

The AP1695 features low start-up current, low operation current. It adopts valley on switching mode to achieve high efficiency. It also has rich protection features including over voltage, short circuit, over temperature protection.

The AP1695 provides the dimmable LED driver with a wide dimmer compatibility including leading edge and trailing edge dimmer. The AP1695 can achieve deep dimming down to 1%, while the dimming curve is compliant with the standard of NEMA SSL6.
• Boundary Conduction Mode BCM Operation to Achieve Highefficiency
• High PF and Low THD PF>0.9, THD<30%
• High Efficiency without Dimmer
• Wide Range of Dimmer Compatibility
• Dimming Curve Compliant with NEMA SSL6
• Low Start-up Current
• Tight LED Current
• Tight LED Open Voltage
• Valley-mode Switching to Minimize the Transition Loss
• Internal Integrated 2A/500V MOSFET can Cover up to 10W
• Easy EMI
• Internal Protections:
• Under Voltage Lock Out UVLO
• Leading-edge Blanking LEB
• Output Short Protection
• Output Open Protection
• Over Temperature Protection
• Flexible for Design with Small Form Factor and Very Low BOM Cost
• Totally Lead-Free & Fully RoHS Compliant Notes 1 & 2
• Halogen and Antimony Free. “Green” Device Note 3

The AP1695 is available in SO-7 package.

Pin Assignments
• Mains Dimmable LED Lighting

Top View

S1 CS 2 RI 3 GND 4

SO-7
7 Drain
6 VCC 5 FB

No purposely added lead. Fully EU Directive 2002/95/EC RoHS & 2011/65/EU RoHS 2 compliant. See for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine <1500ppm total Br + Cl and
<1000ppm antimony compounds.

AP1695
1 of 15

January 2017

Diodes Incorporated

OBSOLETE PART DISCONTINUED

PART OBSOLETE - USE AP1695-20C

AP1695

Typical Applications Circuit

TVS1

C1 C2

R2 ZD1

R3 Q2

Drain

AP1695

R1 3 RI
4 GND

R7 CS 2

LED+

LED-
Ordering Information

Product Name

PART OBSOLETE - USE AP1695-20C

AP1695 X XX

Package M SO-7

Packing TR Tape & Reel

AP1695

RoHS/Green G1 Green

Package SO-7

Temperature Range -40°C to +105°C

Marking Information

Part Number AP1695MTR-G1

Marking ID 1695M-G1

Packing 4000/13’’Tape & Reel

Top View
1695 M-G1 YWWAXX

First and Second Lines Logo and Marking ID Third Line Date Code Y Year WW Work Week of Molding A Assembly House Code XX 7th and 8th Digits of Batch No.

AP1695
12 of 15

January 2017

Diodes Incorporated

OBSOLETE PART DISCONTINUED

PART OBSOLETE - USE AP1695-20C

Package Outline Dimensions All dimensions in mm inch .
1 Package Type SO-7

AP1695
0° 8°

Note Eject hole, oriented hole and mold mark is optional.

AP1695
13 of 15

January 2017

Diodes Incorporated

OBSOLETE PART DISCONTINUED

Suggested Pad Layout
1 Package Type SO-7

PART OBSOLETE - USE AP1695-20C

AP1695

Dimensions Value

Z mm / inch

G mm / inch

X mm / inch

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AP1695MTR-G1 Datasheet file may be downloaded here without warranties.

Datasheet ID: AP1695MTR-G1 509818