Part | Datasheet |
---|---|
![]() |
76000956 (pdf) |
PDF Datasheet Preview |
---|
XBee Grove Development Board The XBee Grove Development Board is a simple-to-use base unit. You can use it to evaluate XBee modules, as it connects any XBee/XBee-PRO module to a PC or microcontroller. One of the main features of the board is that it has several Grove connectors where you can plug in a Grove Module. You can learn more about the Grove module on the Seeed Studio wiki. There are two variants of the board THT and SMT. This guide includes the following topics: • Overview XBee THT Grove Development Board XBee SMT Grove Development Board Overview On this page • Mechanical • Power supply • XBee connector • USB • Reset button • Commissioning button • Association LED • RSSI LED • User LED and User button • On/Sleep LED • Potentiometer • I2C • Grove connectors • Loopback jumper Mechanical The XBee Grove Development Board is 44.8mm x 66mm with a shape similar to a regular XBee module. The board provides four mm assemble drills. Power supply The XBee Grove Development Board can be powered from the 5V supply available on the USB connector or from an external battery connected to a 2-pin, 2mm pitch, PH type connector from JST. When both supplies are available, the board is powered from the USB. The board has a 3.3V regulator that generates 500mA supply. The following table shows the pinout of the battery connector: Battery connector Signal Comments VBAT Battery supply input XBee connector The XBee Grove Development Board provides two 10-pin, THT, 2mm pitch sockets to connect a THT XBee module. It is compatible with both regular XBee/XBee-PRO and programmable XBee. Footprints for two 10-pin, THT, 2.54mm pitch connectors are available on the board. These footprints can be used to solder a pin header on the top or bottom to access the XBee signals or to connect the XBee Grove Development Board to a bread board. The following table shows the pinout of the XBee connector: Pin Signal 1 3.3V 2 XBEE_TX 3 XBEE_RX 4 DIO12 5 RESET_N 6 RSSI/PWM0 LEFT RIGHT Comments Pin Signal Comments XBee supply 1 DIO4 To GROVE_DIO4 and user LED/button To serial to USB device 2 XBEE_CTS_N To serial to USB device To serial to USB device 3 DIO9 To On/Sleep LED To GROVE_DIO12 4 VREF To reset button 5 ASSOC_LED To association LED To RSSI LED and GROVE_PWM 6 XBEE_RTS_N To serial to USB device |
More datasheets: M14327 SL001 | M14327 SL005 | M14327 SL002 | DMG6402LDM-7 | 19-213UBC/C430/TR8 | 2N5245_L99Z | 2N5245 | 2N5245_J35Z | MMBT4124-7-F | MMBT4124-7 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 76000956 Datasheet file may be downloaded here without warranties.