5151016

5151016 Datasheet

515-1016

Part	Datasheet
5151016	5151016 (pdf)

PDF Datasheet Preview
1.63mm Round OptopipeTM Optical Light Pipe, Panel Mount Dialight 515-1016 R MAX DIFFUSED FRONT SURFACE 45° 60° REF TYP Ø [Ø DIRECTION OF OUTPUT Dimensions in mm [inches] TOP SURFACE OF LED RECOMMENDED PLACEMENT OF LED Ø [Ø Ø [Ø MAJOR DIA Alternative MicroLED SMT LEDs for use with 515-1016 597-2x01-2xx 597-2xx1-4xx LED alternatives may not produce optimum light output • High transmissivity polycarbonate material • UL94V-0 compliance • ESD protection circuit isolation from front panel • Wide viewing angle • Secures to panel by press-fit LED Data For absolute maximum ratings and other electrical and optical data on the recommended LEDs, refer to LED data sheets. Operating/Storage Temperature to +100°C Dialight Optopipe Light Pipe Applications This Optopipe’s larger light emitting surface appears bright. It is reliably held in the panel by 3 press-fit splines. This Optopipe functions as a through-the-case indicator with a textured finish on the light-emitting surface that increases its viewing angle. The light sources can be one of Dialight’s 597 Series SMT LEDs. The light source’s emitting surface should be located no more than or 0.5mm from the Optopipe . The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index. Dialight can provide custom Optopipe solutions for your applications. Contact your local representative, listed in the Appendix, for further information. Dialight Corporation • 1913 Atlantic Avenue • Manasquan, NJ 08736 • TEL 732 223-9400 • FAX 732 223-8788 •

PDF Datasheet Preview

1.63mm Round OptopipeTM

Optical Light Pipe, Panel Mount

Dialight
515-1016

R MAX

DIFFUSED FRONT SURFACE
45°
60° REF TYP
Ø [Ø

DIRECTION OF OUTPUT

Dimensions in mm [inches]

TOP SURFACE

OF LED

RECOMMENDED PLACEMENT OF LED
Ø [Ø
Ø [Ø MAJOR DIA

Alternative MicroLED SMT LEDs for use with 515-1016
597-2x01-2xx 597-2xx1-4xx

LED alternatives may not produce optimum light output
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection circuit isolation from front panel
• Wide viewing angle
• Secures to panel by press-fit

LED Data

For absolute maximum ratings and other electrical and optical data on the recommended LEDs, refer to LED data sheets.

Operating/Storage Temperature
to +100°C

Dialight Optopipe Light Pipe Applications

This Optopipe’s larger light emitting surface appears bright. It is reliably held in the panel by 3 press-fit splines. This Optopipe functions as a through-the-case indicator with a textured finish on the light-emitting surface that increases its viewing angle. The light sources can be one of Dialight’s 597 Series SMT LEDs. The light source’s emitting surface should be located no more than or 0.5mm from the Optopipe . The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen index.

Dialight can provide custom Optopipe solutions for your applications. Contact your local representative, listed in the Appendix, for further information.

Dialight Corporation
• 1913 Atlantic Avenue
• Manasquan, NJ 08736
• TEL 732 223-9400
• FAX 732 223-8788
•

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 5151016 Datasheet file may be downloaded here without warranties.

Datasheet ID: 5151016 509298